Alpha Tool.Com.HK Limited Ecocaddy User Manual

							Part No: ECOCAD125/ECOCAD225 Version 2
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14
www.alpha-tools.com
Alpha® Ecogrinder Caddy 
Instruction Manual
MANUAL  
						

							2
TAblE Of CONTENTs
 
Introduction  ........................................................................\
......... 3
  About the Symbols  .............................................................. 3
  Safety Instructions ............................................................... 3
Ecogrinder Caddy  Overview  ...................................................... 5
Required Tools Needed to Assemble the Ecogrinder Caddy  ......5
Main Components for the Ecogrinder Caddy  .............................6
Assembly of the Ecogrinder Caddy  ............................................7
Optional Accessories
  Ecogrinder Overview  .......................................................... 13
  Specifications  ..................................................................... 13
  General Safety Rules  ......................................................... 14
  Electrical Safety ................................................................. 14
  Use Proper Extension Cords  ............................................. 14
  Grounding Instructions  ....................................................... 15
  Ecogrinder Operation  ......................................................... 15
  Main Connection  ................................................................ 15
  Switching ON and OFF ...................................................... 15
  Attaching The Ecogrinder to the Caddy  .............................16
  Dust Bag Carriage Assembly ............................................. 18
  Dust Bag and Accessories  ................................................. 18
  Attaching the Dust Bag ...................................................... 19
  Attaching the Dust Hose to the Ecogrinder  ........................20
Ecogrinder Caddy Operation  .................................................... 21
Ecogrinder Caddy Schematic  ................................................... 22
Ecogrinder Caddy Parts List  ..................................................... 23  
						

							3
INTrODuCTION
Thank you for purchasing the Alpha® Ecogrinder Caddy.  The Ecogrinder Caddy 
is a stand-up grinder caddy for ecogrinders.  To ensure correct use, read this 
Instruction Manual and the Instruction Manual for the power tool and follow the 
operating instructions.  Keep this manual in a place where operators can\
 access 
it easily whenever necessary!
 AbOuT ThE syMbOls
According to the hazard level, all safety notes in this manual are classified into 
“DANGEr”,  “WArNING”, and “CAuTION”.
    DANGEr!  Death or serious personal injury is imminent when handling 
this polisher incorrectly.
    WArNING!  There is a possibility of death or serious personal injury when 
handling this polisher incorrectly. 
    CAuTION!  There is a possibility of personal injury or property damage 
when handling this polisher incorrectly.
Note:    In some situations, failing to observe WArNING notes could result in  
death or serious personal injury.  be sure to read and observe the safety 
notes to ensure safety and correct use of the polisher.  
 sAfETy INsTruCTIONs  
read all these instructions before attempting to operate this product.
  WArNING!
When using electric tools, basic safety precautions should always be fol\
lowed to 
reduce the risk of fire, electric shock, and personal injury, including the following.
for safe Operation
1.  Keep work area clean
  Cluttered areas invite injuries.
2.  Consider work area environment
  Do not expose power tools to rain. Do not use power tools in damp or wet 
locations without G fCI protection.  Keep work areas well lit. Do not use the 
tool in presence of flammable liquids or gases.
3.  Guard against electric shock
  Prevent body contact with grounded surfaces. for example: pipes, radiators, 
ranges, and refrigerator enclosures; use grounded outlets.    
						

							4
4. Keep children and visitors away
  Do not let visitors contact tool or extension cord.  All visitors should be kept 
away from work area.  Keep out of reach of children.
5.  Tool storage
  When not in use, tools should be stored in a secure dry location. A locked 
storage area or high shelf out of children’s reach is ideal.
6.  Dress properly
  Do not wear loose clothing or jewelry. Items such as these can be caught in 
moving parts.  rubber gloves and non-skid footwear are recommended when 
working outdoors. Wear protective hair covering to contain long hair.
7.  Use safety equipment
  Always wear safety glasses and if necessary, a face shield, dust mask and 
hearing protection.
8.  Do not abuse the electrical cord
  Never carry the tool by the electrical cord or pull it to disconnect from receptacle.  
Keep the electrical cord away from heat, oil and sharp edges.
9.  Do not overreach
  Keep proper footing and balance at all times. 
10.  Disconnect tools
  Disconnect the tool from the power supply when not in use, before servic\
ing, 
and when changing accessories, such as blades, bits, cutters.
11.  Avoid unintentional starting
  Do not carry a plugged-in tool with finger on switch. Be sure the switch is off 
when plugging in.
12.  Outdoor use extension cords
  When tool is used outdoors, use only extension cords intended for use ou\
tdoors 
and so marked.
13.  stay alert
  use caution and do not operate tool when you are tired or on medication.
14.  Check for damaged parts
  before using the tool each day, a guard or other part that is damaged should  be carefully checked to determine that it will operate properly and perf\
orm its 
intended function. Check for alignment of moving parts, breakage of part\
s, 
mounting, and any other conditions that may affect its operation. A guard or other 
part that is damaged should be properly repaired or replaced by an autho\
rized 
service center unless otherwise indicated elsewhere in this instruction \
manual. 
have defective switches replaced by authorized service center. Do not use the 
tool if it cannot be turned on and off by the switch.
15. Warning
  The use of any other accessory or attachment other than recommended in 
this instruction manual or the catalog may present a risk of personal in\
jury and 
could void the warranty.
16.  Only qualified technicians should repair this tool
  This electric tool is manufactured in accordance with the standard safety rules. 
Only experts may carry out the repair of electric tools; otherwise, it m\
ay cause 
considerable danger for the operator.   
						

							5
ECOGrINDEr CADDy (ECOCAD125/ECOCAD225) OVEr VIEW
 rEquIrED TOOls NEEDED TO AssEMblE ThE ECOGrINDEr CADDy 
Ecogrinder
(sold separately)
halogen light
Dust hose (sold 
separately)
Dust Carriage 
(sold separately) Dust bag
(sold separately)
switch box
Knob bolts for
height Adjustment handle Assembly
box End Wrench
hex. Wrench spanner   
						

							6   
						

							7
AssEMbly Of ECOGrINDEr CADDy  (ECOCAD125) 
Install the Casters by using the supplied Wrench.
Connect the Chassis Assembly and  the h
andle holder Assembly with the supplied 
M6 bolt & Nut sets.  use the Allen Wrench and spanner to tighten.
 sTEP 1
 sTEP 2
Chassis Assembly
handle holder
Assembly
M6x80 ........................
2 pcs.
M6x16 ........................ 2 pcs.
spring Washer ......... 4 pcs.
Washer ...................... 8 pcs.
M6 Nut ....................... 8 pcs.   
						

							8
Assemble Motor support by using the rubber seat b, the Motor holder 
with  rubber  seat A, the bracket and the supplied Wing  bolt sets.  Attach 
the Knob bolt on the bracket.
Install Motor support Assembly to Chassis Assembly by using supplied 
Wing bolt sets.
 sTEP 3
 sTEP 4
Assembly of Ecogrinder Caddy cont’d
Knob bolt
bracket
rubber seat b
Motor holder
with rubber seat A
Wing bolt .................. 2 pcs.
spring Washer ......... 4 pcs.
Washer ...................... 2 pcs.
M6 Nut ....................... 2 pcs.
Knob bolt  ................. 1 pc.   
						

							9
Create the halogen light Assembly by attaching halogen  light holder to 
the halogen light with the supplied M4 bolt & Nut sets.
Install  halogen  light Assembly on Chassis Assembly by using supplied Wing  bolt 
& Nut sets. 
Note:  Always wear protective gloves when inserting or removing bulb.
 sTEP 5
 sTEP 6
Assembly of Ecogrinder Caddy cont’d   
						

							10
Connect the handle Assembly and  handle Post by using supplied M6  bolt & Nut 
sets.
Connect switch box to the handle Assembly by using the supplied M4 screws.
 sTEP 7
 sTEP 8
Assembly of Ecogrinder Caddy cont’d
handle 
Post
handle Assembly
switch box
M6x16 ........................ 4 pcs.
spring Washer ......... 4 pcs.
Washer ...................... 8 pcs.
M6 Nut ....................... 4 pcs.
M4x10 ........................ 4 pcs.