Home > AllTrade > Jack > AllTrade Low Profile Jack 2 TON 640818 User Manual

AllTrade Low Profile Jack 2 TON 640818 User Manual

Here you can view all the pages of manual AllTrade Low Profile Jack 2 TON 640818 User Manual. The AllTrade manuals for Jack are available online for free. You can easily download all the documents as PDF.

Page 1

Meets ANSI/ASME PALD-2003 Safety Standard
Please retain these instructions for future reference.
If you encounter any problems or difficulties please do not return this jack to the store.  
Please contact our toll free customer service department at:
1-800-423-3598
1-310-522-9008 (California only)
1-310-522-9066 Fax
Cumple con las Normas de Seguridad ANSI/ASME PALD-2003
Por favor, guarde estas instrucciones para que le sirvan de referencia en el futuro.
Si usted se encuentra con algún problema o...

Page 2

11 2
2 TON LOW PROFILE PROFESSIONAL SERVICE JACK
•  STUDY, UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING THIS DEVICE.
•  DO NOT EXCEED RATED CAPACITY
•  USE ONLY ON HARD LEVEL SURFACE
• LIFTING DEVICE ONLY. IMMEDIATELY AFTER LIFTING. SUPPORT THE VEHICLE WITH APPROPRIATE MEANS
• FAILURE TO HEED THESE MARKINGS MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE
• LIFT ONLY ON AREAS OF THE VEHICLE AS SPECIFIED BY THE VEHICLE MANUFACTURER
• NO ALTERATIONS SHALL BE MADE TO THIS PRODUCT
• ONLY...

Page 3

103
YOKE RETAINING WIRE REMOVAL
Your jack has been shipped with a retaining wire to hold the yoke in the downward position. This
must be removed. CAUTION: RETAINING WIRE UNDER LOAD AND COULD SNAP OFF AND CAUSE
PERSONAL OR PROPERTY DAMAGE. WEAR EYE PROTECTION AND GLOVES TO REMOVE. Push
down on the yoke until the hook portion of the wire retainer can be removed from the handle socket
or frame reinforcing strut. A second person may be needed to hold the front of the jack down while
applying downward force...

Page 4

49
2. Visually inspect for cracked welds, bent, loose, missing parts or hydraulic oil leaks.
3. If jack is subjected to abnormal load or shock, remove from service and have it examined by an Authorized
Repair Service.
4. Clean all surfaces and maintain all labels and warnings.
5. Check and maintain the ram oil level.
CHECKING OIL LEVEL
Do not use brake or transmission fluids, or regular motor oil as they can damage the seals. Always purchase and
use products labeled Hydraulic Jack Oil.
1. Turn handle...

Page 5

Because of the potential hazards associated with the misuse of equipment of this type, no alterations shall be
made to the product without written authorization of the manufacturer or supplier.
GATO PARA GARAJE DE PERFIL BAJO DE 2 TONELADAS
• ESTUDIE, COMPRENDA Y RESPETE TODAS LAS INSTRUCCIONES ANTES DE PONER EN FUNCIONAMIENTO
A ESTE DISPOSITIVO.
• NO EXCEDA LA CAPACIDAD CALIFICADA
• UTILICE SOLAMENTE SOBRE UNA SUPERFICIE DURA Y NIVELADA
• DISPOSITIVO DE ELEVACIÓN SOLAMENTE.  INMEDIATAMENTE DESPUÉS DE...

Page 6

67 
Start reading AllTrade Low Profile Jack 2 TON 640818 User Manual

Related Manuals for AllTrade Low Profile Jack 2 TON 640818 User Manual

All AllTrade manuals