Home > AllTrade > Jack > AllTrade Low Profile Jack 2 TON 640818 User Manual

AllTrade Low Profile Jack 2 TON 640818 User Manual

Add to Favourites
    Download as PDF

    View the AllTrade Low Profile Jack 2 TON 640818 User Manual for free. All the AllTrade manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Meets ANSI/ASME PALD-2003 Safety Standard Please retain these instructions for future reference. If you encounter any problems or difficulties please do not return this jack to the store. Please contact our toll free customer service department at: 1-800-423-3598 1-310-522-9008 (California only) 1-310-522-9066 Fax Cumple con las Normas de Seguridad ANSI/ASME PALD-2003 Por favor, guarde estas instrucciones para que le sirvan de referencia en el futuro. Si usted se encuentra con algún problema o...
    Page 2 11 2 2 TON LOW PROFILE PROFESSIONAL SERVICE JACK • STUDY, UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING THIS DEVICE. • DO NOT EXCEED RATED CAPACITY • USE ONLY ON HARD LEVEL SURFACE • LIFTING DEVICE ONLY. IMMEDIATELY AFTER LIFTING. SUPPORT THE VEHICLE WITH APPROPRIATE MEANS • FAILURE TO HEED THESE MARKINGS MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE • LIFT ONLY ON AREAS OF THE VEHICLE AS SPECIFIED BY THE VEHICLE MANUFACTURER • NO ALTERATIONS SHALL BE MADE TO THIS PRODUCT • ONLY...
    Page 3 103 YOKE RETAINING WIRE REMOVAL Your jack has been shipped with a retaining wire to hold the yoke in the downward position. This must be removed. CAUTION: RETAINING WIRE UNDER LOAD AND COULD SNAP OFF AND CAUSE PERSONAL OR PROPERTY DAMAGE. WEAR EYE PROTECTION AND GLOVES TO REMOVE. Push down on the yoke until the hook portion of the wire retainer can be removed from the handle socket or frame reinforcing strut. A second person may be needed to hold the front of the jack down while applying downward force...
    Page 4 49 2. Visually inspect for cracked welds, bent, loose, missing parts or hydraulic oil leaks. 3. If jack is subjected to abnormal load or shock, remove from service and have it examined by an Authorized Repair Service. 4. Clean all surfaces and maintain all labels and warnings. 5. Check and maintain the ram oil level. CHECKING OIL LEVEL Do not use brake or transmission fluids, or regular motor oil as they can damage the seals. Always purchase and use products labeled Hydraulic Jack Oil. 1. Turn handle...
    Start reading AllTrade Low Profile Jack 2 TON 640818 User Manual

    Related Manuals for AllTrade Low Profile Jack 2 TON 640818 User Manual

    All AllTrade manuals