AllTrade Kawasaki 9in Band Saw 840254 User Manual

1. To increase blade tension, turn the
blade tension knob clockwise.
2. To reduce blade tension, turn the
blade tension knob counterclock-
wise.
3. Fully raise the upper blade guide.
4. Check the tension by pushing the
side of the blade, halfway between
the table and upper blade guide,
with your finger. The blade should
bend no more than 5/64 to 1/8 inch.
5. Correct the tension as needed by
turning the blade tension knob and
then measuring bending again.
A AD
DJ
JU
US
ST
TI
IN
NG
G 
 B
BL
LA
AD
DE
E 
 T...

6. Fit the new blade in place,
ensuring that the teeth point
toward the front of the saw
(doors).
7. Apply tension to the new blade
by rotating the blade tension
knob.
8. Center the band saw blade on
the band saw wheel.
9. Turn the upper wheel by hand
to ensure the blade is centered
on the wheels.
10.Adjust saw blade tracking as
needed (see procedure).
11.Close both housing doors.
12.Swing the lower blade guide
back into position.
13.Attach the (U-clamp) under the
work table with two screws
provide and...

O OP
PE
ER
RA
AT
TI
IN
NG
G 
 T
TH
HE
E 
 L
LA
AS
SE
ER
R 
  
 
Do not stare into the laser beam. Never aim the beam at
any person or an object other than the work piece. The use of optical instru-
ments with this laser product will increase the chance of eye damage.
U US
SI
IN
NG
G 
 T
TH
HE
E 
 L
LA
AS
SE
ER
R 
 L
LI
IG
GH
HT
T
1. Place the workpiece on the table.
2. Press the laser light ON/OFF switch to the “I” position.
3. To turn the laser light off press the laser light ON/OFF switch to the “O”...

M MA
AI
IN
NT
TE
EN
NA
AN
NC
CE
E 
 A
AN
ND
D 
 C
CL
LE
EA
AN
NI
IN
NG
G
It is important to keep your band saw in perfect operating condition.
C CL
LE
EA
AN
NI
IN
NG
G
After every use of the band saw, the saw and surrounding area should be cleaned
thoroughly to remove any buildup of metal filings. Use an air hose or soft bristled
brush to clean the saw components. Sweep around the saw or use a shop vacuum
to remove the debris from the floor.
A AC
CC
CE
ES
SS
SO
OR
RI
IE
ES
S
O Op
pt
ti
io
on
na
al
l 
 a...

The date of purchase shall be the date of shipment to the original purchaser, or the
date the original purchaser took possession, custody or control of the product,
whichever occurred first. This warranty shall be null and void if the product or any
component thereof is modified or altered. This warranty does not apply to any
other product and/or component thereof manufactured or distributed by Alltrade,
and does not apply to products and/or components thereof designed, manufactured
and/or assembled by...

PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE 
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY 
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF...