Algoma Hardwoods Tech Reports User Manual
Here you can view all the pages of manual Algoma Hardwoods Tech Reports User Manual. The Algoma Hardwoods manuals for Door are available online for free. You can easily download all the documents as PDF.
Page 11
Tech Report 800.678.8910 • 1001 Perry St • Algoma, WI 54201 • www.algomahardwoods.com7/20/2010 TR-11 Specifications calling for positive pressure doors or door systems are likely to increase over time. To aid you in responding to those needs, the following summarizes the positive pressure approvals that Algoma Hardwoods currently has. Positive Pressure Approvals Category A: No additional edge-sealing system is required. The intumescent is contained in the door itself. 20 minutes (UL and ITS/WHI):...
Page 12
Tech Report 800.678.8910 • 1001 Perry St • Algoma, WI 54201 • www.algomahardwoods.com7/20/2010 TR-12 Positive Pressure Category A Positive Pressure Cat. A UL 20 Min. PB UL 20 Min. SLC/SCLC UL 45 Min. UL 60 Min. UL 90 Min. Thickness 1 3/4” 1 3/4” 1 3/4” 1 3/4” 1 3/4” Size Single 4/0 x 9/0 4/0 x 9/0 4/0 x 9/0 4/0 x 9/0 4/0 x 9/0 Pair Standard 8/0 x 9/0 8/0 x 9/0 8/0 x 9/0 8/0 x 9/0 8/0 x 9/0 Pair Double Egress 8/0 x 9/0 8/0 x 9/0...
Page 13
Tech Report 800.678.8910 • 1001 Perry St • Algoma, WI 54201 • www.algomahardwoods.com7/20/2010 TR-13 Positive Pressure Category A Positive Pressure Cat. A UL 20 Min. PB UL 20 Min. SLC/SCLC UL 45 Min. UL 60 Min. UL 90 Min. Hinges (Cont.) Flu sh Bolts Surface Yes Yes Yes Yes Yes Mor tised Yes Yes Yes Yes Yes Auto Yes Yes Yes Yes Yes Manual Yes Yes Yes Yes Yes Extension Yes Yes Yes Yes Yes...
Page 14
Tech Report 800.678.8910 • 1001 Perry St • Algoma, WI 54201 • www.algomahardwoods.com7/20/2010 TR-14 Positive Pressure Category B Wood & Plastic UL20 PB UL20SLC/SCLC UL 45 Min. UL 60 Min. UL 90 Min. Flush Bolts Surface Yes Yes Yes Yes Yes Mor tised Yes Yes Yes Yes Yes Auto Yes Yes Yes Yes Yes Manual Yes Yes Yes Yes Yes Extension Yes Yes Yes Yes Yes Drop Seals Surface Yes Yes...
Page 15
Tech Report There are many desirable aspects to traditional surface mounted ver tical rods. Primary among them is the ease of access, should hardware require maintenance or repair. However, while ease of access may be desirable for maintenance or repair, it is cer tainly less than desirable for car ts, gurneys, etc., that can easily hit the lower ver tical rod and affect its performance or aesthetics. This exposure to lower ver tical rod damage is heightened in environments with high levels of...
Page 16
Tech Report Structural composite lumber is a substitute material for low density hardwood lumber. It is also referred to as LSL (laminated strand lumber) or LSL Timberstrand. The product has been on the market for a number of years and is used in a variety of applications as a structural component. Door manufacturers use SCL as a rail and/or inner stile on architectural an commercial wood doors. An inner stile provides screw holding for the attachment of hinges to the edge of the door and is...
Page 17
Tech Report 800.678.8910 • 1001 Perry St • Algoma, WI 54201 • www.algomahardwoods.com7/20/2010 TR-17 NFPA 80 PROTECTION PLATES NFPA 80, Standard for Fire Doors and Fire Windows, 1995 Edition, limits protection plates or kickplates on fire doors to a 16” (405mm) high area at the bottom of the door. Protection plates attached above this area must be tested and approved and the plate material must be as indicated in the door manufacturer’s individual published listings. Algoma has approvals over 16”...
Page 18
Tech Report 800.678.8910 • 1001 Perry St • Algoma, WI 54201 • www.algomahardwoods.com7/20/2010 TR-18 Stile and Rail Standard Component Dimensions NON-LABEL AND 20 MINUTE RATED NON-LABEL UNDER 1’6” (460MM) WIDE Top Rail 6” (152mm) 6” (152mm) Intermediate Rail 4” (102mm) 3” (76mm) Ver tical Mullion 4” (102mm) 3” (76mm) Lock Rail 6” (152mm) 6” (152mm) Stile 6” (152mm) 3” (76mm) Bottom Rail 9-1/2” (241mm) 9-1/2” (241mm) NOTE: Stile and rail dimensions may vary to accommodate hardware,...