Algoma Hardwoods Door Details User Manual

1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
www.algomahardwoods.com • sales
@algomahardwoods.comDetail 117/20/10
Louver must be located a minimum 
of 6 from door edge and 10 from 
bottom. Not allowed in labeled doors
having lites, fire exit devices or vision
panels.
Air Louver Fusible Link Louver
A
A
Fusible link
Heat slot
UseFor use in FD 1⁄3, 3⁄4, 1 and 11⁄2Hour Fire Doors. 
MaterialPrime coated in beige enamel.
Listing ClassificationFor use in Algoma...

1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
www.algomahardwoods.com • sales
@algomahardwoods.comDetail 127/20/10
1  
Active doorActive door
1  
Astragals and Channels
1  1  
13/4 
Inactive door Active door  


 


 
 
 



 



 
  


 


 
 
 


 


 
 
1  1  
Inactive door
Active door
13/4 
Algoma’s Standard Astragal Set #207
Horizontal Section
For LH or RH Active Pairs (RH Active Shown)
Algoma’s Standard Astragal Set...

1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
www.algomahardwoods.com • sales
@algomahardwoods.comDetail 137/20/10
Rabbets
Standard Rabbet 
Between Flush Door & Transom
Rabbeted Meeting Edges 
1/2  
13/4  
29/32  
1/2  
13/4  
Strike
Guide
113/32  
13/32  
1/2  
1/8  
1
3/4  
29/32  
Standard Rabbet 
With Flushbolt 

1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
www.algomahardwoods.com • sales
@algomahardwoods.comDetail 147/20/10
Radius Edges
Wood stile
Standard 25/8 Radius Edge
Other radii as required by pivot hardware 

1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
www.algomahardwoods.com • sales
@algomahardwoods.comDetail 157/20/10
Shelf (if used) onNarrow Face of Door
Hinge
FD 1/3 Hour
Rated Frame
Latchsets
Metal Astragal
and Metal Channel
at Meeting Edges
Set #217
Note: Alternate 
Latching Methods:
1.  Top leaf latches 
  into bottom leaf and 
  bottom leaf latches 
 into frame.
2. Both top and 
  bottom leaves latch 
  into the frame.
Preferred method 
is #1.
Shelf and...

1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
www.algomahardwoods.com • sales
@algomahardwoods.comDetail 167/20/10
Dutch Doors and Wood Astragals 






 






 
 
8  
13/4  
Door width
1 1  
11/16  
5  
3  
3/4  
3/4  
11/16  
5  
3  
3/4  
3/4  
Inactive 
doorActive door
1/8  
Astragal
Matching Wood Astragal
Dutch Door Shelves and Brackets
Shelf brackets furnished as shown with vertical grain. 
Two per single shelf, 4 per double...

1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
www.algomahardwoods.com • sales
@algomahardwoods.comDetail 177/20/10
Polymer Edging
Polymer edging is a tough and durable,
yet highly decorative edging for
architectur al doors. It is available in
t h ree colors.
P olymer edging offer s exceptional
p rotection fr om damage to the edge
of face veneer s. Particular ly suited to
d oors installed in ar eas such as
hospital patients’ rooms and
institutional kitchens,...

1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
www.algomahardwoods.com • sales
@algomahardwoods.comDetail 187/20/10
Applied Mouldings
A-55/8
11/2A-1
11/2
3/4
A-2
11/2
9/16
A-3
11/4
9/16
A-4
11/2
11/16
A-6
1/2
3/8
A-7
1
7/16
A-8
11/8
5/8
Moulding fastened
with brads and
adhesives
Typical Elevations
Other designs available
Use For use with FD 13, 34, 1 and 112Hour Fire Doors and non-labeled doors. 
ListedUL listed.  
Maximum Moulding Size1" by 134"...

1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
www.algomahardwoods.com • sales
@algomahardwoods.comDetail 197/20/10
Quirks
1⁄8,1
⁄4- inch wide x 3⁄64inch deep U groove; 
1⁄8 inch wide x 3⁄64inch deep V groove
• Configurations subject to factory
approval.
• Available in nonrated, call for 
    fire-rated availability.
• Special finishing procedures may be required depending on desired
finish and appearance. 

1001 Perry Street • Algoma, Wisconsin 54201
920.487.5221 • 1.800.678.8910 • FAX 920.487.3636
www.algomahardwoods.com • sales
@algomahardwoods.comDetail 207/20/10
Noncorrosive metal flashing should
be used at the bottom of lite openings
on exterior doors. 
F2 flashing (left) completely covers
the bottom of lite openings and offers
the best protection. This is the
recommended flashing for all outward
swinging exterior doors. 
Glass for exterior doors should be
bedded in the best quality closedcell
sealing...