Aleratec Wall Mount for Charge and Guard Secure ChargeSync Cabinet 16 User Guide

INSTALLATION GUIDE
Aleratec  
Wall Mount for Charge and 
Guard Secure Charge/Sync  Cabinet 16™
Part No. 400107  

www.aleratec.com
Copyright/Model Identification
The content of this manual is for informational purposes only and is subject 
to change without notice. 
This manual is copyrighted with all rights reserved. Under copyright laws, 
this manual and the software described within may not be copied, except in 
the normal use of the product(s) described within or to make a backup copy.
Copyright© 2014  
Aleratec, Inc.
9851 Owensmouth Avenue
Chatsworth, CA 91311 U.S.A.
www.aleratec.com
Aleratec
® is a registered...

www.aleratec.com1
Introduction
Thank you for purchasing the Aleratec Wall Mount for Charge and Guard 
Secure Charge/Sync Cabinet 16. Please read this Installation Guide 
thoroughly before using this product. 
 
Product Features
• Safely secures cabinet to the wall
•  Preserves precious floor/table space
•  Heavy-duty construction and materials
 
Included Items
 
Safety 
 
WARNING:  Make sure that you consult with appropriate engineering, 
architectural or construction professional to ensure that your...

www.aleratec.com
2
Introduction
Tools Needed
 
You will also need mounting hardware such as bolts, screws, washers, etc to 
mount the brackets and additional tools for the mounting hardware chosen.   
 
Suggestions for different methods of mounting:
 
Brick wall: 
                5/16” x 3” Concrete anchor bolts
                5/16” Washers
                1/4” Concrete drill bit
Drywall:
                1/4” x 3” Toggle bolts 
                1/4” Washers 
                3/4” Drill bit
Stud:...

www.aleratec.com3
Introduction
Mounting Considerations  
 
Space Requirements:  

www.aleratec.com
4
Introduction
Wood Stud Wall Mounting Option    
 
Studs can be positioned in one of four mounting options. While the first 
option (studs on either side) is recommended, you should consult with a 
construction professional to confirm which method is best suited for your 
particular situation. After you decide on a hole option, follow attachment 
instructions on the following pages.
Important – Wall brackets must be secured to the wall using all 6 mounting 
holes using appropriate...

www.aleratec.com5
Installation
Wood Stud Wall Mounting
1. Find stud and draw a mark.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2.  Place template on wall lining up the chosen hole with the stud at the 
desired height.  

www.aleratec.com
6
Installation
Wood Stud Wall Mounting - Continued
3.  Secure template to wall and check to ensure it is level.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4.  Use the appropriate drill bit(s) to drill the three holes for the top bracket 
that correspond with the hole markers on the paper template.  

www.aleratec.com7
Installation
Wood Stud Wall Mounting - Continued
5. Use the appropriate drill bit(s) to drill the bottom three holes.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
6.  Remove paper template from the wall.  

www.aleratec.com
8
Installation
Wood Stud Wall Mounting - Continued
7.  Secure the top bracket with your chosen mounting hardware. Verify wall 
bracket is level before tightening screws.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
8.  Repeat step 7 for the bottom bracket.