Aleratec RoboJet Disc AutoPrinter with Continuous Ink System User Guide

							www.aleratec.com25
Specification\f
Disc Capacity• 100
System Requirements
•  Pentium III 1GHz, 1GB DRAM (2GB DRAM 
recommended) Windows 7, XP, Vista, 2000 SP4
•  2 Available USB2.0 ports
Operation Environment•  Operating Temperature: 50º F to 90º F (10º C to 32º C)
•  Humidity: 15% to 80%
Disc Autoloader Dimensions (without disc bin or guide rods)• Width  12.75 inches (324mm)
•  Height  7.75 inches (197mm)
•  Length  11 inches (280mm)
Printer Dimensions • Width  21.1 inches (537mm)
•  Height  7.4 inches (188mm)
•  Length  11.4 inches (289mm)
Disc Autoloader Weight • 1.2kg / 2.6lb
Printer Weight • 6.2kg / 13.7lb
Disc Autoloader 
Electrical Specifications • 
Input Voltage  100-240V AC
•  Input Frequency  50/60 Hz
Printer 
Electrical Specifications • 
Input Voltage  100-120V AC
•  Input Frequency  50/60 Hz  
						

							www.aleratec.com
26
Specification\f
For 	best	results	we	recommend:
Aleratec HydroGuard Inkjet Printable Duplicator Grade DVD/CD recordable media (90-
Pack CD-R part number: 110119, DVD+R part number: 300117, and DVD-R part number: 
230116). 
 
• Smear, Smudge and Water-Resistant Disc Surface 
 
• Glossy inkjet printable surface with uniform whiteness from hub to outer edge 
 
• Superior Print Quality with bright, vibrant colors
 
• Quick Drying Disc Surface 
 
 
Aleratec Inkjet Printable Duplicator Grade  
Blu-ray recordable, 25-Pack media 
(4x BD-R part number: 370102,  
6x BD-R part number: 370104). 
 
Check the Aleratec website at www.aleratec.com for additional Inkjet printable media.
RoboJet Disc AutoPrinter Ink, Black, Part #410100  
RoboJet Disc AutoPrinter Ink, Cyan, Part #410101, ERP $64.99 
RoboJet Disc AutoPrinter Ink, Magenta, Part #410102, ERP $64.99 
RoboJet Disc AutoPrinter Ink, Yellow, Part #410103, ERP $64.99 
RoboJet Disc AutoPrinter Ink, Light Cyan, Part #410104, ERP $64.99 
RoboJet Disc AutoPrinter Ink, Light Magenta, Part #410105, ERP $64.99 
RoboJet Disc AutoPrinter Ink, Black, 2-Pack, Part #410106, ERP $114.99 
RoboJet Disc AutoPrinter Ink, Color 5-Pack (C, M, Y, LC, LM), Part #410107, ERP $269.99  
						

							www.aleratec.com27
Technical Support
After reading this User Guide, if you need additional assistance with this 
product, please contact Aleratec Technical Support. Our technical staff will 
be happy to assist you, but they may need your help to better assist you. 
Calling Aleratec Technical Support without all the necessary information 
can be both time consuming and frustrating. Therefore, please try to have 
the following information ready before calling:
1. Serial Number - the serial number is located on the  bottom of the 
RoboJet Disc Autoloader.
2.  Any questions or problems, please provide enough information so our 
technical staff can recreate and diagnose it.
Technical Support Addre\f\fe\f and Phone N\iumber\f
 
X By e-mail:  [email protected] 	m   –   Skype:  support.aleratec.com
 
X By Telephone:  1-818-678-0484
Technical Support Group can be reached 8:00 AM to 5:00 PM, Pacific 
Time, Monday through Friday, excluding U.S. holidays.
Please try to call from a phone near your computer system.
 
X Access is available 24 hours a day, 365 days a year, via:
The World Wide Web at:  www.aleratec.com
FAX at: 1-818-678-0483  
						

							www.aleratec.com
28
Service and Support\i
 Aleratec, Inc., Limit\ied Warranty
This Limited Warranty covers defects encountered in the course of 
normal use of this product and does not apply to damage from improper 
use, abuse, accidents, unauthorized service, or inadequate preparation 
and packaging when shipping the product to Aleratec, Inc. This 
warranty does not cover excessive ink contamination or failure related 
to the use of ink refills not authorized by Aleratec, Inc..  
Aleratec, Inc. provides the following limited warranty for this product 
only if the product was originally purchased for use, not re-sale, from 
Aleratec, Inc., an Aleratec, Inc. authorized dealer or distributor, or any 
other Aleratec, Inc. approved reseller for this product. This product is 
warranted to be free from defects in workmanship and material for a 
period of 90 days from the date of your original purchase or up to 3000 
prints.
If the product fails during normal and proper use within the warranty 
period, Aleratec, Inc. will, at its option, repair or replace the product at 
no cost (except shipping and insurance). This limited warranty does not 
include service to repair damage from improper installation, accident, 
disaster, misuse, abuse, or modifications to the subsystem, or by any 
other causes unrelated to defective materials or workmanship.  
						

							www.aleratec.com29
Service and Support\i
Plea\fe Note:
This Warranty is valid only within the United States and Puerto Rico, 
and applies only to products that are new and unopened on the date 
of purchase. For areas outside the United States and Puerto Rico, 
contact the authorized dealer from whom you purchased this product to 
determine which warranty, if any, applies.
THIS LIMITED WARRANTY CONSTITUTES YOUR SOLE AND 
EXCLUSIVE REMEDY, AND THE SOLE AND EXCLUSIVE 
LIABILITY OF ALERATEC, INC., AND IS IN LIEU OF ALL 
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, 
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OF ITEMS FOR A PARTICULAR PURPOSE.
Your sole remedy shall be repair or replacement, with new or 
refurbished components, as provided in this Limited Warranty. 
Aleratec, Inc. shall not be liable for any direct, indirect, special 
incidental products or consequential damages, including, but not 
limited to, any loss of data or loss of profits or business, regardless of 
the form of action or theory of liability resulting from any defect in, 
or use of, this product (even if Aleratec, Inc. has been advised of the 
possibility of such damages).
In any event, the liability of Aleratec, Inc. under this Limited Warranty, 
for damages to you or any third party, regardless of the form of action 
or theory of liability, shall not exceed the purchase price you paid for 
this product.
Some states do not allow limitations of the disclaimer of implied 
warranties, the period an implied warranty lasts, or the exclusion or 
limitation of incidental or consequential damages, so the exclusions and 
limitations stipulated in this Limited Warranty may not apply to you. 
This Limited Warranty gives you specific legal rights, and you may 
have other rights which vary from state to state.  
						

							www.aleratec.com
30
Service and Support\i
To Obtain Warranty Service:
You must ship your subsystem to the authorized dealer where your 
subsystem was purchased within the 90 day warranty period and no 
later than thirty days after discovery of claimed defect, whichever 
occurs first. In either case, you must provide proof of original purchase 
before any warranty service can be performed. Products and parts 
provided as a result of warranty service may be other than new but 
will be in good working order and become your property at the time of 
exchange. At the same time, the exchanged products or parts become 
the property of Aleratec, Inc.
When shipping the subsystem for service, you agree to insure the 
system, to prepay shipping charges, to prepare the system as instructed 
and to use the original shipping container or equivalent. Any service 
outside the scope of this limited warranty shall be at Aleratec, Inc.’s or 
its Authorized Service Provider’s rates and terms then in effect.
This warranty gives you specific legal rights; you may also have other 
rights which vary from state to state.  
						

							www.aleratec.com31
Technical Support FAX Back Form
Aleratec, Inc.
Technical Support Fa\ix Back Form
Please record the following information to help expedite any warranty claim:
Model No.: _____________ Serial No.:  ____________________________
Date Purchased:   _______________________________________________
Place of Purchase:  ______________________________________________
To:	 Technical	Support	Group	FAX:	1-818-678-0483
FROM:  _____________________ FAX:  ____________________________
E-MAIL:   ____________________________________________________
RE:  ________________________ TEL:  ____________________________
DATE:  _______________ # OF PAGES:  ____________________________
I am experiencing the following problems with my RoboJet Disc AutoPrinter:
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
By answering these questions, your problem will be solved more rapidly. 
Make copies as necessary. You can reach us electronically at: www.aleratec.
com on the internet.   
						

							Document \fumber: \b601\ 05_UG_E\fG_Rev. A  Copyright © 2012 
Specifications subje\ ct to change without\  notice. 
 
Aleratec, Inc.
9851 Owensmouth Avenue
Chatsworth, CA 91\b11\  U.S.A.
www.aleratec.com