Home > Aleratec > Optical Disc Printer > Aleratec RoboJet Disc AutoPrinter with Continuous Ink System User Guide

Aleratec RoboJet Disc AutoPrinter with Continuous Ink System User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Aleratec RoboJet Disc AutoPrinter with Continuous Ink System User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							USER GUIDE
    Aleratec
    RoboJet Di\fc AutoPrinter\b
    with Continuou\f Ink S\iy\ftem
    Part No. 360105  
    						
    							www.aleratec.com
    Copyright/Model Ide\intification
    The content of this manual is for informational purposes only and is subject 
    to change without notice. 
    This manual is copyright with all rights reserved. Under copyright laws, this 
    manual and the software described within may not be copied, except in the 
    normal use of the product(s) described within or to make a backup copy.
    Copyright© 2012
    Aleratec, Inc.
    9851 Owensmouth Avenue
    Chatsworth, CA 91311 U.S.A.
    Aleratec
    ® is a registered trademark and RoboJet Disc AutoPrinter™ is a  
    trademark of Aleratec, Inc. 
    Check out Aleratec Online!
    •	 Blog.Aleratec.com
    •	 Facebook.com/Aleratec
    •	 Twitter.com/Aleratec
    •	 YouTube.com/Aleratec
     
    Please record the following information to help expedite any warranty 
    claim:
    Model No.   _____________________ Serial No. _____________________
    Date Purchased   ________________________________________________  
    Place of Purchase   ______________________________________________  
    						
    							www.aleratec.com
    Radio/TV Interferenc\ie Statement
    The equipment described in this guide emits radio frequency energy. If it 
    is not installed in accordance with the manufacturer’s instructions, it may 
    cause interference with radio or television reception.
    This equipment has been tested and found to comply with the limits for a 
    Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
    are designed to provide reasonable protection against harmful interference 
    in a residential installation.
    This equipment generates, uses, and can radiate radio frequency ener gy. 
    If not installed and used in accordance with the instruction manual, this 
    equipment may cause harmful interference to radio communications. 
    However, there is no guarantee that interference will not occur in a 
    particular installation. If this equipment does cause harmful interference to 
    radio or television reception, which can be verified by turning the equipment 
    off and on, the user is encouraged to try to correct the interference by one or 
    more of the following measures:
    •  Reorient or relocate the receiving antenna.
    •  Increase the separation between the equipment and the receiver.
    •  Connect the equipment to an electrical outlet on a circuit that is dif ferent from 
    the circuit to which the receiver is connected.
    •  Consult your dealer or an experienced radio/TV technician for help.
    This equipment has been certified to comply with the limits for a Class B 
    computing device, pursuant to FCC Rules. In order to maintain compliance 
    with FCC regulations, shielded cables must be used with this equipment. 
    Operation with non-approved equipment or unshielded cables is likely to 
    result in interference to radio and TV reception. The user is cautioned that 
    changes and/or modifications made to this equipment, without the approval 
    of manufacturer, could void the user’s authority to operate this equipment.  
    						
    							www.aleratec.com
    Table of Content\f
    Introduction ........................................................................\i............... 1
    Product Features  ..................................................................................... 1
    Included Items  ........................................................................................ 1
    Key Items  ................................................................................................ 2
    Precaution\f  ........................................................................\i............... 3
    Location  .................................................................................................. 3
    Printer Requirements  .............................................................................. 4
    In\ftallation  ........................................................................\i................. 5
    Unpacking the Unit  ................................................................................. 5
    Printer Installation  .................................................................................. 5
    Minimum Hardware and Software Requirements  .................................. 6
    Operation  ................................................................................................ 6
    Transportation  ......................................................................................... 6
    Installing Aleratec’s RoboJet Disc Autoloader Software  ........................ 7
    Setup Autoloader  .................................................................................... 9
    U\fing the RoboJet AutoPrinter  ...............................................13
    Powering on the Printer  ........................................................................ 13
    Getting to know the Aleratec Autoloader application  ........................... 16
    Using the Aleratec RoboJet Disc Autoloader Application  .................... 18
    Trouble\fhooting  ........................................................................\i..... 20
    Specification\f  ........................................................................\i......... 24
    Technical Support  ........................................................................\i.. 26
    Service and Support\i  ....................................................................... 27
    Technical Support FAX Back Form  ...............................................30  
    						
    							www.aleratec.com1
    Introduction
    Thank you for purchasing the Aleratec RoboJet Disc AutoPrinter with 
    Continuous Ink System. Please read this User Guide thoroughly before 
    using this product.
     
    Note: Included printer comes wit\f separate User Guide. Please re\biew printer 
    User Guide before installing Disc Autoloader to printer and using Disc AutoPrinter.
    Product Feature\f
    The Aleratec RoboJet Disc Autoloader is a fully automatic disc printing 
    system. Features include:
     
    ▪ Up to 100-disc capacity
     
    ▪ High-capacity continuous ink system
     
    ▪ Add more blanks and remove finished discs while the system is printing
     
    ▪ 6-color process and up to 5,780 DPI resolution
     
    ▪ Easy installation
    Included Item\f* 
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    *See included printer User Guide for items t\fat s\fould be included wit\f printer.
    A.  USB2.0 Hub
    B.  USB cable
    C.  Disc Bin, 50 and 100\s Disc Capacity
    D.  Power Adapter cable E. 
    Disc Bin, 100-Disc C\sapacity
    F.  Disc Bin, 50-Disc Ca\spacity
    G.  2 Autoloader Disc Trays (one is 
    already in t\fe Autoloader unit)
    E
    D
    F
    C
    A
    B
    G  
    						
    							www.aleratec.com
    2
    Introduction
    Key Item\f on the Di\f\ic Autoloader
    A.  Disc Holder Post Slo\sts
    B.  Disc Load Mec\fanism
    C.  Disc Bin Holder
    D.  Autoloader Disc Tray E. 
    Printer Mode Switc\f\s
    F.  USB Port
    G.  Power Port
    C
    F
    G
    BE
    AD  
    						
    							www.aleratec.com3
    Precaution\f
    1. C\foose a flat, le\bel \ssurface for t\fe pri\snter and disc autol\soader 
    near a table edge.\s  (T\fis is important\s because t\fe disc bi\sn will 
    \fang o\ber t\fe table \sedge once installed\s) 
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    2.  Allow adequate cle\sarance for mo\bing p\sarts.
    3.  Do not place near \s\feat sources suc\f as \sradiators or air du\scts, or 
    in a place subject \sto direct sunlig\ft,\s excessi\be dust, mec\s\fanical 
    \bibration or s\fock.
    4.  Good care will \felp\s assure maximum pro\sduct life. Imprope\sr 
    operating en\bironme\snt and misuse may \bo\sid t\fe warranty.
    Before installing your RoboJet Disc AutoPrinter with Continuous Ink System, 
    please read the following.
    Location
    Avoid placing the RoboJet Disc AutoPrinter with Continuous Ink System in a 
    location subject to:
    •  High humidity     
    •  High temperature
    •  Excessive dust • 
    Mechanical vibration
    •  Direct sunlight
    •  Electromagnetic radiation  
    						
    							www.aleratec.com
    4
    Precaution\f
    Printer Requirement\f
    The disc autoloader is designed to work specifically with the included inkjet 
    printer. Installation on other printers is not supported and will void your warranty.  
    						
    All Aleratec manuals Comments (0)

    Related Manuals for Aleratec RoboJet Disc AutoPrinter with Continuous Ink System User Guide