Aleratec Charge and Sync Station 16 User Guide
Have a look at the manual Aleratec Charge and Sync Station 16 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
USER GUIDE Aleratec Charge and Sync Station 16™ Part No. 400103
www.aleratec.com Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice. This manual is copyrighted with all rights reserved. Under copyright laws, this manual and the software described within may not be copied, except in the normal use of the product(s) described within or to make a backup copy. Copyright© 2014 Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A. www.aleratec.com Aleratec® is a registered trademark and Charge and Sync 16™ is a trademark of Aleratec, Inc. Check out Aleratec Online! • google.com/+AleratecInc • YouTube.com/Aleratec • Twitter.com/Aleratec • Facebook.com/Aleratec • Blog.Aleratec.com Please record the following information to help expedite any warranty claim: Model No. _____________________Serial No. _____________________ Date Purchased ________________________________________________ Place of Purchase ______________________________________________
www.aleratec.com Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy. If it is not installed in accordance with the manufacturer’s instructions, it may cause interference with radio or television reception. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency ener gy. If not installed and used in accordance with the instruction manual, this equipment may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be verified by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an electrical outlet on a circuit that is different from the circuit to which the receiver is connected. • Consult your dealer or an experienced radio/TV technician for help. This equipment has been certified to comply with the limits for a Class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and/or modifications made to this equipment, without the approval of manufacturer, could void the warranty and the user’s authority to operate this equipment. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to authorized personnel only.
www.aleratec.com Table of Contents Introduction .......................................................................................1 Product Features .....................................................................................1 Included Items ........................................................................................1 Key Items on the Charge and Sync Station 16 .......................................2 LED Charge and Sync Indicators ...........................................................3 Using the Included Tablet Stands ...........................................................4 Precautions .......................................................................................5 Installation ..............................................................................................5 Transportation .........................................................................................5 Warning ...................................................................................................5 Using the Charge and Sync Station 16...........................................6 Labeling Your Cables ..............................................................................6 Connection ..............................................................................................7 iOS Device and iTunes Configuration Tips ..........................................10 Specifications .................................................................................16 Technical Support ..........................................................................17 Service and Support.......................................................................18
www.aleratec.com1 Introduction Thank you for purchasing the Aleratec Charge and Sync Station 16. Please read this User Guide thoroughly before using this product. Product Features • Active Smart-Charge technology supports up to 16 iOS, Android and most other devices simultaneously • Provides up to a Full 2.4 amps per port to quickly charge all 16 devices • Sync up to 16 tablets or other USB devices simultaneously • Heavy-duty, metal enclosure designed for reliability in deployment environments • LED indicators show the charge or sync status of your attached tablets • Includes stands to hold your 16 tablets while being charged or synced Included Items • Charge and Sync Station 16 • US power cord • USB 2.0 A/M to B/M cable • 4 tablet stands • 2 cable numbering label sheets • Quick Start Guide • Registration Card
www.aleratec.com2 Introduction Key Items – Charge and Sync Station 16 LED Charge and Sync Indicators 16 USB Charge and Sync Ports AC Power In Power Switch USB Port
www.aleratec.com3 Introduction LED Charge and Sync Indicators - Charging LED Charge and Sync Indicators - Syncing ChargingDevice is close to fully charged Syncing and chargingDevice is close to fully charged
www.aleratec.com4 Introduction Using the Included Tablet Stands The included tablet stands can be used to hold most standard sized tablets with or without protective cases. Make sure to lean your first device inward (toward the middle) when setting your devices onto the stands. Each subsequent device will lean in the same direction as the first. If you lean the first device outward, the weight of the device will upend the stand. When removing tablets, remove them in the opposite order that they were added.
www.aleratec.com5 Precautions Before installing your Charge and Sync Station 16, please read the following. Installation Avoid placing the Charge and Sync Station 16 in a location subject to: • High humidity • High temperature • Excessive dust • Mechanical vibration • Direct sunlight • Electromagnetic radiation It is very important to place the unit in a well ventilated area. This device is not meant for outdoor use. Good care will help assure maximum product life. Improper operating environment and misuse may void the warranty. Transportation Keep the original packing materials for future moving or shipping of your Charge and Sync Station 16. Warning Do not allow children to handle or use this product without direct adult supervision.
www.aleratec.com6 Using the Charge and Sync Station 16 Labeling Your Cables Apply the numbering labels to each end of your charge and sync cables for easier identification. Charge and sync cables not included.