Aleratec 17 DVD CD Tower Publisher SLS Duplicator User Guide

www.aleratec.com55
Stand-Alone Tower Publisher LS: Tutorials
Audio CD Editing - continued
14. Use the UP or DOWN arrow button until you see “Track 4” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 4”. You will see the following display:
15. Use the UP or DOWN arrow button until you see “Track 5” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 5”. You will see the following display:
16. Use the...

www.aleratec.com56
Stand-Alone Tower Publisher LS: Tutorials
20. Press the ENT button again to confirm. You will see the following display:
21. When the process is complete, your mixed copy will be ejected. You will see 
the following display:
You will then be directed back to the main menu:
Processing to Disc...  10%COPYTESTPRINTSOURCE
ESCENT


Job Completed!Press OK to FinishCOPYTESTPRINTSOURCE
ESCENT


DUPLICATOR  1.0013. Mix Audio TracksCOPYTESTPRINTSOURCE
ESCENT

              

www.aleratec.com57
Stand-Alone Tower Publisher LS: Tutorials
Introduction to Manage Accounts 
The “Manage Accounts” feature allows the administrator to:
• Create user accounts and passwords to prevent unauthorized use of the 
duplicator.
• View existing user account lists.
• Edit existing user account information, including name and password.
• Delete existing user account(s).
• Enable/Disable the Manage Accounts feature.
The “Manage Accounts” feature is disabled by default. Prior to activating this...

www.aleratec.com58
Stand-Alone Tower Publisher LS: Tutorials
Manage Accounts: Overview
To access the “Manage Accounts” feature, perform the following steps:
1. Turn on the duplicator. After the bootup is complete, you will see the following 
display:
2. Press the UP or DOWN button consecutively until you see following:
3. Press ENT. You will be asked for the Administrator’s Password.
By default, the Administrator’s Password is “0000”. To enter that, press UP 
or DOWN button to select the first digit of...

www.aleratec.com59
Stand-Alone Tower Publisher LS: Tutorials
Manage Accounts Feature Overview - continued
View User
This menu allows you to view current existing user accounts.
1. Press the ENT button to enter into this menu. Press the ESC button to go back 
to the main menu or cancel the current selection.
Note: User “Admin” is the administrative account. It will always be 
there.
Create User
This menu allows you to create additional user accounts. Each user has their own 
settings and hard drive...

www.aleratec.com60
Stand-Alone Tower Publisher LS: Tutorials
Note: User “Admin” is the administrative account, you can NOT 
change the user name for this account, but you will be able to 
change the password for this account.
Note: User name consists of maximum 8 alphanumeric letters or 
numbers.
Note: User password will consist of 4 numbers. 
Delete User
This menu allows you to delete an existing user account. You will be asked to select 
and existing user account to be removed.
1. Press the ENT button...

www.aleratec.com61
Stand-Alone Tower Publisher LS: Tutorials
Introduction to Duplication Mode
This feature reduces the “Duplication from Hard Drive” process to a single step.
There are three features under “Duplication mode”:
1. On the Fly
2. Load and Copy
3. Prompt
On the Fly
This mode instructs the duplicator to copy directly from the Master Disc. The 
duplicator performs simultaneous read and write operations without any delays.
Advantage:
 ▪Ideal for small quantity quick duplication.
Disadvantage:...

www.aleratec.com62
Stand-Alone Tower Publisher LS: Tutorials
Disadvantage:
 ▪The loading time may have an impact on overall duplication time for small 
duplication jobs.
 ▪The Master Disc will be loaded to the reserve partition in the Hard Drive 
temporarily until a new master is loaded and overrides the previous image. 
In comparing this duplication mode with the traditional “Duplication from 
Hard Drive” process, it offers the user more simplicity. By selecting the 
“Load and Copy” mode via one simple...

www.aleratec.com63
Stand-Alone Tower Publisher LS: Tutorials
Introduction to Duplication Mode - continued 
5. Press the ENT button once. You will see the following display:
6. Press the UP or DOWN button consecutively to select your desired mode.
7. Press the ENT button once to submit your selection. You will see the following 
display:
8. Press ESC button once to go back to the main menu. 
Duplication Mode:AutoCOPYTESTPRINTSOURCE
ESCENT


Setup9. Duplication ModeCOPYTESTPRINTSOURCE
ESCENT

...

www.aleratec.com64
Stand-Alone Tower Publisher LS: Tutorials
Using AUTOCOPY
The “Autocopy” function allows you to copy from Disc to Disc automatically 
without pressing any keys. It is the simplest way to make CD/DVD copies. The 
following tutorial will show you how to use this feature.
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press the ENT button to enter the “Autocopy” mode. You will see the following 
display:
3. Insert your Master Disc into the top Reader Tray and...