Aleratec 17 DVD CD Tower Publisher SLS Duplicator User Guide

www.aleratec.com45
Stand-Alone Tower Publisher LS: Tutorials
Rename Existing Hard Drive Partition Name - continued
7. Rename the partition you’ve just selected.
To enter a partition name, use the UP or DOWN button to select the character 
and use ESC or ENT button to move the cursor position. When you are 
finished, move the cursor to OK and press ENT. For example, if I want to 
rename the image from “FUN” to “FUN2”, do the following:
a. Move the cursor to the forth position by pressing ENT until you...

www.aleratec.com46
Stand-Alone Tower Publisher LS: Tutorials
Delete Existing Hard Drive Partition Permanently
If for some reason you need to delete your existing hard drive partition permanently, 
do the following:
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter “Hard Drive Setup” menu. You will see the following display:
3. Use the UP or DOWN arrow button to navigate to the following screen.
4. Press ENT to enter the “Delete Partition” menu.  You will see...

www.aleratec.com47
Stand-Alone Tower Publisher LS: Tutorials
Delete Existing Hard Drive Partition Permanently - continued 
7. You will be directed back to the “Hard Drive Setup” menu. You will see the 
following display:
Hard Drive Setup4. Delete PartitionCOPYTESTPRINTSOURCE
ESCENT

      

www.aleratec.com48
Stand-Alone Tower Publisher LS: Tutorials
Change the SETUP Settings
Most of the internal settings and information are stored inside the “Setup” menu. To 
explore and modify these settings is simple. In the following example you will be 
modifying the “Auto Start” setting. 
Note: The default “Setup” is set for optimal performance. It is unnecessary 
to change this setting if you are satisfied with your duplicator performance.
1. Use the UP or DOWN arrow button to navigate to the...

www.aleratec.com49
Stand-Alone Tower Publisher LS: Tutorials
Audio CD Editing
This procedure will guide you in using the “Mix Audio Tracks” feature. This process 
allows you to combine audio tracks from various CDs into a single customized 
audio CD.
To use this feature you need a temporary storage location to hold your music before 
the duplicator can make it an audio CD. The following are temporary storage 
location choices:
• Hard Drive:
Choosing “Hard Drive” as the temporary storage location, you...

www.aleratec.com50
Stand-Alone Tower Publisher LS: Tutorials
4. Once you made your selection, you will see the following display:
OR
When you see the above display, insert an audio CD that contains your music 
track(s) in the Master Reading Tray and a blank CD-R media into one of Writer 
Trays.
Note: If either one of the above screens is shown for more than 2 
minutes, please check your Master Disc or Blank Discs for quality.
Please allow 5-10 seconds for the duplicator to detect your Master Disc and...

www.aleratec.com51
Stand-Alone Tower Publisher LS: Tutorials
Audio CD Editing - continued 
6. Press ENT button to submit your selection. You will see the following display:
Warning: If the capacity of total audio tracks you have selected is 
more than your blank CD-R disc’s capacity, you will see the following 
two screens flashing:
If you see the above messages, press ENT button to continue.
Once the Copying process is complete, you will see the following display:
7. You now have the choice to finalize...

www.aleratec.com52
Stand-Alone Tower Publisher LS: Tutorials
8. Press ENT button to continue. Your old Master Disc will be ejected and you can 
insert another audio CD into the Reading Tray. To continue, go back to Step 3.
9. If you choose to finalize it, press the DOWN arrow button until you see the 
following display:
Press the ENT button to continue. You will see following confirmation display:
Press the ENT button again to confirm the finalization. During the finalization 
process, you will see...

www.aleratec.com53
Stand-Alone Tower Publisher LS: Tutorials
Audio CD Editing - continued
Example of Mixing Audio Tracks to the Hard Drive  
In this example we will be creating a new Audio CD from 2 different discs: 
 ▪CD1: song 2, and song 4
 ▪CD2: song 3, song 4 and song 5
1. Go to function 13 “Mix Audio Tracks”.
2. Press ENT button.
3. Use the UP or DOWN arrow button to select “Hard Drive”. Press ENT button to 
continue.
4. Insert CD1 into the 1st Drive and a blank CD into the 2nd Drive.
5. Wait until...

www.aleratec.com54
Stand-Alone Tower Publisher LS: Tutorials
8. Use the UP or DOWN arrow button until you see following display:
9. Press ENT to submit your selection. You will see the following display:
10. Once the loading process is complete, you will see the following display:
11. To continue with your music selections, press the DOWN button once and you 
will see following display:
12. Press ENT button to continue. Insert CD2 into the Reader Tray. When CD2 is 
recognized you will see the following...