Aleratec 17 Bluray DVD CD Tower LightScribe Publisher SLS User Guide

							www.aleratec.com25
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
Load Master Disc ont\Bo the Hard Drive - continued 
b. Press ENT to enter “Hard Drive Setup” menu and you will see the 
following display:
c. Load your Master Disc on to the Hard Drive. To do so, use the UP or 
DOWN arrow button to navigate to the following screen.
d. Press ENT to enter “Load Partition” menu and you will see the following 
display:
The “228GB” indicates the available capacity of your hard drive in term of GB.
Hard Drive Set\fp1. Select Partitio\BnCOPYUSBPRINTSOURCE
ESCENT


Hard Drive Set\fp2. Load PartitionCOPYUSBPRINTSOURCE
ESCENT


Load Partition  [     228GB]Load-> New Partiti\BonCOPYUSBPRINTSOURCE
ESCENT

               
						

							www.aleratec.com26
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
e. You now have the choice to load your Master Disc into a new (empty) 
partition or overwrite one of the existing partitions (if any exist) by 
inputting/modifying the name you desire; or you can simply choose “Auto 
Generate” to have the system automatically generate a partition name for 
you. Afterwards, simply press the UP or DOWN arrow button to find your 
desired selection and press ENT to submit your selection. You will see the 
following (unless you have chosen “Auto Generate”, then please skip to 
Step “h”):
f. Name the partition you are about to load into the Hard Drive. To enter 
the name, use the UP or DOWN button to select the character and use 
ESC or ENT button to move the cursor position and once you’ve finished 
move the cursor to OK and press ENT. For example, if I want to name the 
partition of your Master Disc as “FUN”, do the following:
Make sure the cursor is located at the first position:
i. Press DOWN button consecutively until “F” is displayed.
ii. Press ENT button once to move the cursor to the next position.
iii. Press “DOWN” button consecutively until “U” is displayed.
iv. Press ENT button once to move the cursor to the next position.
v. Press “DOWN” button consecutively until “N” is displayed.
vi. Press ENT button once to move the cursor to the next position.
vii. With the partition name “FUN” displayed press ENT consecutively 
until the cursor is moved to OK.
viii. Press ENT once to submit your name selection.
g. You will see the following confirmation screen:
EDIT PARTITION NAME[        ] OK?COPYUSBPRINTSOURCE
ESCENT


EDIT PARTITION NAME[x       ] OK?COPYUSBPRINTSOURCE
ESCENT


Load Partition?[FUN        ] OK?COPYUSBPRINTSOURCE
ESCENT

              
						

							www.aleratec.com27
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
Load Master Disc ont\Bo the Hard Drive - continued
h. Press ENT button to confirm. Once your Master Disc has been recognized. 
The loading progress indicator will be displayed and you will see the 
following:
i. Once your Master Disc has been loaded completely, you will see the 
following display:
Press the ENT button to go back to the “Hard Drive Setup” menu.
“4000MB” indicates the total capacity of your Master Disc.
“423MB” indicates the current MB from the Master Disc that has been loaded.
“FUN” indicates the name of the partition the data is being loaded onto.
“10%” indicates the current percentage of the Master Disc that has been loaded.
Loading... 4000MBFUN 10% 423MBCOPYUSBPRINTSOURCE
ESCENT


Load Partition OK!\BPress OK to Contin\fe\BCOPYUSBPRINTSOURCE
ESCENT

              
						

							www.aleratec.com28
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
Rename Existing Har\Bd Drive Partition \BName
When you load your Master Disc to a hard drive partition, you are asked to give it a 
name. You can rename it at anytime afterwards (including the Reserved Partition). 
To rename your existing hard drive partition name, do the following:
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter “Hard Drive Setup” menu. You will see the following display:
3. Use the UP or DOWN arrow button to navigate to the following screen.
4. Press ENT to enter the “Rename Partition” menu. You will see the following 
display:
5. Use the UP or DOWN arrow button to find the desired partition. Press ENT to 
submit your selection. You will see the following display:
6. Press ENT once again to confirm. You will see the following display:
Aleratec 1.0011. Hard Drive Set\fp\BCOPYUSBPRINTSOURCE
ESCENT


Hard Drive Set\fp1. Select Partitio\BnCOPYUSBPRINTSOURCE
ESCENT


Hard Drive Set\fp3. Rename Partitio\BnCOPYUSBPRINTSOURCE
ESCENT


Choose Partition:[FUN        ] D\bD 4000MBCOPYUSBPRINTSOURCE
ESCENT


Rename Partition:[FUN        ] D\bD, \BOK?COPYUSBPRINTSOURCE
ESCENT


Rename Partition:[FUN        ] OKCOPYUSBPRINTSOURCE
ESCENT

                          
						

							www.aleratec.com29
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
Rename Existing Har\Bd Drive Partition \BName - continued
7. Rename the partition you’ve just selected.
To enter a partition name, use the UP or DOWN button to select the character 
and use ESC or ENT button to move the cursor position. When you are 
finished, move the cursor to OK and press ENT. For example, if I want to 
rename the image from “FUN” to “FUN2”, do the following:
a. Move the cursor to the forth position by pressing ENT until you reached 
desired location:
b. Press DOWN button consecutively until “2” is displayed.
c. With the Image Name changed from “FUN” to “FUN2”, press ENT 
consecutively until the cursor is moved to OK.
d. Press ENT once to submit your name selection. When you are done you 
will see the following display:
You will be directed back to “Hard Drive Setup” menu.
Enter HDD Image Na\Bme[FUNx        ] OKCOPYUSBPRINTSOURCE
ESCENT


Partition FUN2Renamed!COPYUSBPRINTSOURCE
ESCENT


Hard Drive Set\fp3. Rename Partitio\BnCOPYUSBPRINTSOURCE
ESCENT

              
						

							www.aleratec.com30
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
Delete Existing Har\Bd Drive Partition \BPermanently
If for some reason you need to delete your existing hard drive partition permanently, 
do the following:
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter “Hard Drive Setup” menu. You will see the following display:
3. Use the UP or DOWN arrow button to navigate to the following screen.
4. Press ENT to enter the “Delete Partition” menu.  You will see the following 
display:
5. Use the UP or DOWN arrow button to find the desired partition. Press ENT to 
submit your selection. You will see the following display:
6. Press ENT to confirm. You will see the following screen for 2 seconds.
Aleratec 1.0011. Hard Drive Set\fp\BCOPYUSBPRINTSOURCE
ESCENT


Hard Drive Set\fp1. Select Partitio\BnCOPYUSBPRINTSOURCE
ESCENT


Hard Drive Set\fp4. Delete Partitio\BnCOPYUSBPRINTSOURCE
ESCENT


Choose Partition:[FUN        ] D\bD 4000MBCOPYUSBPRINTSOURCE
ESCENT


Delete Partition:[FUN        ] D\bD, \BOK?COPYUSBPRINTSOURCE
ESCENT


Partition [FUN    \B  ]Deleted !COPYUSBPRINTSOURCE
ESCENT

                          
						

							www.aleratec.com31
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
Delete Existing Har\Bd Drive Partition \BPermanently - continued 
7. You will be directed back to the “Hard Drive Setup” menu. You will see the 
following display:
Hard Drive Set\fp4. Delete Partitio\BnCOPYUSBPRINTSOURCE
ESCENT

      
						

							www.aleratec.com32
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
How to Make Copies \Bfrom the Hard Driv\Be 
1. Load a master disc to the HDD if it is not already loaded and make sure Source 
is set to the Hard Drive.
2. Go back to “COPY” Menu.
a. Use UP or DOWN arrow button to navigate to the following screen.
3. Start the Copy Process.
a. Now, please insert your blank discs into the Writer Trays (make sure the 
Reader Tray is empty) and press ENT button to enter the “COPY” menu. 
You will be asked to choose which hard drive partition to copy from:
b. Choose the desired partition to copy from and press ENT button to submit 
your selection. Then you will see the following Counter Selection Menu:
c. The Counter Selection Menu will let you to choose how many copies you 
want to make for your project. This Counter Selection feature will allow 
the duplicator to count the number of copies you’ve made and prompt you 
when the desired number of copies has been made.
COPYUSBPRINTSOURCE
ESCENT


Aleratec 1.001.0 COPY
COPYUSBPRINTSOURCE
ESCENT


Choose Partition:[FUN      ] D\bD 4000MB
COPYUSBPRINTSOURCE
ESCENT


Co\fnter:No Co\fnter              
						

							www.aleratec.com33
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
You can select “No Counter” if you prefer to copy continuously with no 
interruption. (It will still count the number of copies, but it will not notify 
you when to stop.) To select the “No Counter”, simply press ENT button 
when you see the screen above. Then skip below and continue on to step 
“d”.
Or, you can select “Specify Counter” to specify the number of copies (1 to 
9999) by pressing the UP or DOWN navigation button to the below screen:
Then please press ENT button to submit. You will see the screen below:
To specify the number of copies for your project, you need to enter/input 
a 4-digit number. If you are planning to specify a number that is less than 
4 digits, please fill the leading spaces with “0”s (any leading “0” will 
be skipped). An example of that 4-digit number could be “0234” (Two 
hundred and thirty four), or “0010” (ten). Remember, the beginning “0”s 
are skipped, therefore “0010” means “10”, which is the number 10.
To enter the number, you need to use UP or DOWN button to select the 
number for each digit and use ENT or ESC button to move the cursor 
position right or left, once you’ve finished, move the cursor to OK and 
press ENT. For example, if I want to specify a counter value of 21 (twenty 
one). The 4-digit value would be “0021”. To input the desired quantity, 
please do the following:
Make sure the cursor is located at the first position:
i. Press DOWN button consecutively until “0” is displayed.
ii. Press ENT button once to move the cursor to the next position.
iii. Press DOWN button consecutively until “0” is displayed.
iv. Press ENT button once to move the cursor to the next position.
v. Press DOWN button consecutively until “2” is displayed.
vi. Press ENT button once to move the cursor to the next position.
COPYUSBPRINTSOURCE
ESCENT


Co\fnter:Specify Co\fnter
COPYUSBPRINTSOURCE
ESCENT


Specify Co\fnter:[0        ] OK?
COPYUSBPRINTSOURCE
ESCENT


Specify Co\fnter:[X        ] OK?              
						

							www.aleratec.com34
Stand-Alone Tower P\fblisher SLS: \BT\ftorials
How to Make Copies \Bfrom the Hard Driv\Be - continued
vii. Press DOWN button consecutively until “1” is displayed.
viii. Now, we have “0021” displayed and then, press ENT once and the 
cursor is now moved to OK.
ix. Then, press ENT once to submit your counter value.
Now you will see following screen:
Note: If the ABOVE \bcreen i\b di\bpla\byed for more than \b2 minute\b, 
plea\be check your B\blank Di\bc\b for qualit\by.
d. Please allow 5-10 seconds for the duplicator to detect your Hard Drive 
partition and Blank Discs as well. After your Hard Drive partition and 
Blank Discs have been recognized, then you will see the following screen:
Note: By default, the “\bAuto Start” \betting\b i\b \bet to “Auto”. F\bor 
example, if your du\bplicator ha\b detect\bed 3 blank di\bc\b and\b 
didn’t detect any a\bdditional blank di\bc\b\b for 30 \becond\b, th\ben the 
duplication will be \b\btarted automatical\bly.
Note: Once the number of\b blank di\bc\b you in\be\brted matche\b the 
number of di\bc\b dete\bcted on the \bcreen.\b Then pre\b\b ENT (if you 
are not u\bing Auto Start or wi\bh \bto \bpeed up the pro\bce\b\b) to confirm 
and the following P\broce\b\bing \bcreen will\b appear.
The “7” indicates there are 7 discs that were recognized by the recording tray. Actual quantity may be differentdepending on your machine.
COPYUSBPRINTSOURCE
ESCENT


Preparing...Waiting for Blanks
COPYUSBPRINTSOURCE
ESCENT


Preparing...7 Disc Detected, Go\B?
COPYUSBPRINTSOURCE
ESCENT


Processing... Please Wait