Aleratec 131 USB HDD Copy Tower SA User Guide

							www.aleratec.com35
Using the USB Duplicator
7.2	Copy	Area	
This function supports the selection of Quick Copy or Copy whole area of the 
source.
1. In the Setup menu, use the  UP or Down arrow to scroll through the Setup 
options until Copy Area is displayed on the LCD screen. Press  OK	to view 
area options.  
 
 
 
 
7.2.1 Only Data area – Quick Copy
  If the controller system can verify FAT 16, 32, NTFS, Linux Ext 2, 
Ext 3 format for the source, the system will copy just the data area 
when this function is selected. If it cannot verify the format, the 
system will automatically copy the whole area of the source. For 
example, if a 2GB source is FAT 32 and it has 50MB of data, the 
system will copy only the 50MB of data. 
7.2.2 Whole area – Controller will copy whole area of the source.
  If the source is not FAT 16, 32, NTFS, Linux Ext 2, Ext 3 format, 
the system will copy the entire media, even the blank area. When 
this function is selected, Quick Copy will not be used. The copy 
process takes longer. 
 
 
 
 
 
2. Press OK	to confirm your desired area setting.
[ Setup ]
2. Copy Area
[ Copy Area ]
System and Files
[ Copy Area ]
Whole Media  
						

							www.aleratec.com
36
Using the USB Duplicator
7.3	Button	Sound
This setting controls the button sound. 
1.  Use the UP or DOWN arrow to scroll through the menu until Setup is 
displayed on the LCD screen. Press the  OK. 
2.  Use the UP or Down arrow to scroll through the Setup options until 
Button Sound is displayed on the LCD screen. 
3.  Default setting is  ON. 
Use the UP or DOWN arrows to select either  ON 
or OFF . 
Press the OK button to change, or  ESC to exit.
USB Duplicator
7. Setup
[ Setup ]
3. Button Sound
[ Button Sound ]
On  
						

							www.aleratec.com37
Using the USB Duplicator
7.4	Target	 Tolerance
This function is used to set the tolerance % of capacity difference between 
source and targets. 
1.  Use the UP or DOWN arrow to scroll through the menu until Setup is 
displayed on the LCD screen. Press the  OK. 
2.  Use the UP or Down arrow to scroll through the Setup options until 
Target Tolerance is displayed on the LCD screen. Press  OK to view 
tolerance options.  
 
 
 
 
 
 
No	Limit: This option will copy the source on the same size or larger 
targets. 
 
100%	Same: This option will copy the source on the target drives that 
are identical.   
 
Allow	 Tolerance:  This option will allow you to set a custom “Up” and 
“Low” tolerance limit. Use the  UP or DOWN arrows to make your 
selection.  
 
3. Press OK	to confirm your desired setting.
USB Duplicator
7. Setup
No Limit
100% Same
Allow Tolerance
[ Setup ]
4. Target Tolerance
[ Set up limit ]
0%
[ Set low limit ]
0%
0% through 50%
No Limit
0% through 50%
No Limit  
						

							www.aleratec.com
38
Using the USB Duplicator
7.5	 Asynchronous	(Enable/Disable)
This function allows the user to enable/disable asynchronous copying. Use 
Up and Down arrow keys to toggle between and push 	OK to select, or ESC 
to exit. 
7.6	Power 	Off	Time	Between	Copy	and	Compare
This function will set the wait time before automatically starting the 
compare process after the copy process has completed. 
1.  Use the UP or DOWN arrow to scroll through the menu until Setup is 
displayed on the LCD screen. Press the  OK. 
2.  Use the UP or Down arrow to scroll through the Setup options until 
“Power off time between copy and compare” is displayed on the LCD 
screen. Press the OK button to make your time selection.
 
 
 
 
3.  Use the UP or Down arrow to scroll through the timing options (in 
seconds). After making your selection, press the  OK button to confirm.
 
 
 
 
 
 
USB Duplicator
7. Setup
[ Setup ]
6. Power off time...
[ Power off time ]
00 through 15 seconds  
						

							www.aleratec.com39
Using the USB Duplicator
7.7	Language
This function selects the language shown on the display (English and 
Japanese).
1. Use the UP or DOWN arrow to scroll through the menu until Setup is 
displayed on the LCD screen. Press the  OK button to select or press 
ESC to go to the next setting. 
2.  Use the UP or Down arrow to scroll through the options until Language 
is displayed on the LCD screen. 
3. To select, press the  OK button, or ESC to exit. 
USB Duplicator
7. Setup
[ Setup ]
7. Language  
						

							www.aleratec.com
40
Using the USB Duplicator
7.7	Set	to	Default
This function will reset all settings to their original values.
1.  Use the UP or DOWN arrow to scroll through the menu until Setup is 
displayed on the LCD screen. Press the  OK button to select or press 
ESC to go to the next setting. 
2.  Use the UP or Down arrow to scroll through the options until Set to 
Default is displayed on the LCD screen. 
Press the OK button.
 
 
 
 
3.  You will be prompted with a warning to confirm you selection. Press 
OK	to continue reset all setting to their original values.
 
 
 
 
 
4.  After the process is complete, the following will be displayed.
USB Duplicator
7. Setup
[ Setup ]
8. Set to Default
Warning:
Clear parameter to default?
Complete:
All parameter was cleared!  
						

							www.aleratec.com41
Specifications
Operating Type• Stand-alone (No PC Required)
Number of Targets • 330120 Model: 7
•  330121 Model: 23
•  330122 Model: 31
Supported Media • USB Flash Drives or 2.5” USB Hard Disk 
Drives/SSD Drives with USB
Transfer Speed • 1.5GB/min Typical
Copy Mode • Synchronous or Asynchronous
LCD Display • 2 x 16 Back-lighted
Power Requirements • 100V - 240V AC, 50/60 Hz
Operating Temperature • 41°F - 122°F
Operating Humidity  • 15% - 90%  
						

							www.aleratec.com
42
Technical Support
After reading this User Guide, if you need additional assistance with this 
product, please contact Aleratec Technical Support. Our technical staff will 
be happy to assist you, but they may need your help to better assist you. 
Calling Aleratec Technical Support without all the necessary information 
can be both time consuming and frustrating. Therefore, please try to have 
the following information ready before calling:
1.  Part Number - the part number is located on the  bottom of the USB 
HDD Duplicator.
2.  Serial Number - the serial number is located on the  bottom of the USB 
HDD Duplicator.
3.  Troubles - your questions about the USB HDD Duplicator. Please 
provide enough information about your problems so our technical staf f 
can recreate and diagnose it.
Technical Support Addresses and Phone Numbers
 
X By e-mail:  [email protected]
 
X By Telephone:  1-818-678-0484		–		Skype:	support.aleratec.com
Technical Support Group can be reached 8:00 AM to 5:00 PM, Pacific 
Time, Monday through Friday, excluding U.S. holidays.
Please try to call from a phone near your Aleratec product.
 
X Access is available 24 hours a day, 365 days a year, via:
The World Wide Web at:  www.aleratec.com
FAX at: 1-818-678-0483  
						

							www.aleratec.com43  
						

							www.aleratec.com
44