Aleratec 13 DVD CD LightScribe Duplicator SA User Guide

							www.aleratec.com45
Stand-Alone LightScribe Duplicator SA: Tutorials
Audio CD Editing - continued
Example of Mixing Audio Tracks to the Hard Drive  
In this example we will be creating a new Audio CD from 2 different discs: 
 ▪CD1: song 2, and song 4
 ▪CD2: song 3, song 4 and song 5
1. Go to function 13 “Mix Audio Tracks”.
2. Press ENT button.
3. Use the UP or DOWN arrow button to select “Hard Drive”. Press ENT button to 
continue.
4. Insert CD1 into the 1st Drive and a blank CD into the 2nd Drive.
5. Wait until the following screen appears.
6. Use the UP or DOWN arrow button until you see “Track 2” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 2”. You will see the following display:
7. Use the UP or DOWN arrow button until you see “Track 4” on the 2nd line, 
and then press ENT to confirm. A “*” symbol will appear on the left of “Track 
4” like following:
DUPLICATOR 1.0013. Mix Audio TracksCOPYTESTPRINTSOURCE
ESCENT


Total:  0  Trk 0m :  0sTrack  1: 4m  :03sCOPYTESTPRINTSOURCE
ESCENT


Total:  1  Trk  4m :  49s*Track  2: 4m  :49sCOPYTESTPRINTSOURCE
ESCENT


Total:  2  Trk  9m :  47s*Track  4: 4m  :58sCOPYTESTPRINTSOURCE
ESCENT

                  
						

							www.aleratec.com46
Stand-Alone LightScribe Duplicator SA: Tutorials
8. Use the UP or DOWN arrow button until you see following display:
9. Press ENT to submit your selection. You will see the following display:
10. Once the loading process is complete, you will see the following display:
11. To continue with your music selections, press the DOWN button once and you 
will see following display:
12. Press ENT button to continue. Insert CD2 into the Reader Tray. When CD2 is 
recognized you will see the following display.
13. Use the UP or DOWN arrow button until you see “Track 3” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 3”. You will see the following display:
Total:  2  Trk 9m :  47sAre you done?COPYTESTPRINTSOURCE
ESCENT


Auto Editing...  3 4m : 58sCOPYTESTPRINTSOURCE
ESCENT


Total:  2  Trk 9m :  47sFinish Editing?    >COPYTESTPRINTSOURCE
ESCENT


Total:  2  Trk 9m :  47sInsert Next Master?COPYTESTPRINTSOURCE
ESCENT


Total:  2  Trk 9m :  47sTrack  1:  4m : 03sCOPYTESTPRINTSOURCE
ESCENT


Total:  3  Trk 14m :  35s*Track  3:  4m : 47sCOPYTESTPRINTSOURCE
ESCENT

                          
						

							www.aleratec.com47
Stand-Alone LightScribe Duplicator SA: Tutorials
Audio CD Editing - continued
14. Use the UP or DOWN arrow button until you see “Track 4” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 4”. You will see the following display:
15. Use the UP or DOWN arrow button until you see “Track 5” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 5”. You will see the following display:
16. Use the UP or DOWN arrow button until you see following:
17. Press ENT to submit your selection. You will see the following display:
18. Once the loading process to the hard drive is complete, you will see following 
display:
19. When you have finished selecting all of our tracks, press the ENT button to 
finalize. You will see the following display:
Total:  4  Trk 20m :  01s*Track  4:  5m : 26sCOPYTESTPRINTSOURCE
ESCENT


Total:  5  Trk 24m :  29s*Track  5:  4m : 27sCOPYTESTPRINTSOURCE
ESCENT


Total:  5  Trk 24m :  29sAre you done?COPYTESTPRINTSOURCE
ESCENT


Auto Editing...  3  4m : 47sCOPYTESTPRINTSOURCE
ESCENT


Total:  5  Trk  24m :  29sFinish Editing?    >COPYTESTPRINTSOURCE
ESCENT


Total:  5  Trk 24m :  29sConfirm to Finalize?COPYTESTPRINTSOURCE
ESCENT

                          
						

							www.aleratec.com48
Stand-Alone LightScribe Duplicator SA: Tutorials
20. Press the ENT button again to confirm. You will see the following display:
21. When the process is complete, your mixed copy will be ejected. You will see 
the following display:
You will then be directed back to the main menu:
Processing to Disc...  10%COPYTESTPRINTSOURCE
ESCENT


Job Completed!Press OK to FinishCOPYTESTPRINTSOURCE
ESCENT


DUPLICATOR  1.0013. Mix Audio TracksCOPYTESTPRINTSOURCE
ESCENT

              
						

							www.aleratec.com49
Stand-Alone LightScribe Duplicator SA: Tutorials
Introduction to Manage Accounts 
The “Manage Accounts” feature allows the administrator to:
• Create user accounts and passwords to prevent unauthorized use of the 
duplicator.
• View existing user account lists.
• Edit existing user account information, including name and password.
• Delete existing user account(s).
• Enable/Disable the Manage Accounts feature.
The “Manage Accounts” feature is disabled by default. Prior to activating this 
feature, the duplicator recognizes all users as the only activated user defined as the 
administrator. The pre-defined password for this function is “0000”.
With this feature enabled additional users will have their own settings and have 
access only to the hard drive partitions they have loaded. No one else will have the 
permission to access these settings/partitions other than the Administrator.
For example, if USER1 logged-in and loaded a Master Disc to the hard drive 
partition (Partition A), and USER2 logs-in, USER2 will not have access to any 
partition loaded by USER1, which includes partition A.
To take advantage of this feature, use the following instructions:
1. Change the Administrator password. Please refer to Feature Overview “3. Edit 
User Info” on page 52 of this User Guide for more information.
2. Create a User Name and Password for every authorized person on this 
duplicator. Please refer to Feature Overview “2. Create User” on page 52 of this 
User Guide for more information.
3. Enable the “Manage Accounts” feature by turning on the “Password on Boot 
UP” setting. Please refer to “Password on Bootup” on page 53 of this User 
Guide for more information.
Note: This duplicator comes with standard license which allows you 
to create up to 32 users.   
						

							www.aleratec.com50
Stand-Alone LightScribe Duplicator SA: Tutorials
Manage Accounts: Overview
To access the “Manage Accounts” feature, perform the following steps:
1. Turn on the duplicator. After the bootup is complete, you will see the following 
display:
2. Press the UP or DOWN button consecutively until you see following:
3. Press ENT. You will be asked for the Administrator’s Password.
By default, the Administrator’s Password is “0000”. To enter that, press UP 
or DOWN button to select the first digit of your password and press the ENT 
button to submit the current digit. You will be guided to select the next digit. 
Repeat above steps until you’ve selected all digits of your password. After you 
have entered the password, press the ENT button to submit your password.
4. Once your password is validated, you will be guided to “Manage Accounts”. 
You will see the following display:
There are five menus in “Manage Accounts”: 
View User
Create User
Edit User Info
Delete User
Password on Bootup
1
2
3
4
5
DUPLICATOR 1.001. COPYCOPYTESTPRINTSOURCE
ESCENT


DUPLICATOR 1.0016. Manage AccountsCOPYTESTPRINTSOURCE
ESCENT


Enter Admin’s PWD[XXXX] OKCOPYTESTPRINTSOURCE
ESCENT


Manage Accounts1. View UserCOPYTESTPRINTSOURCE
ESCENT

                  
						

							www.aleratec.com51
Stand-Alone LightScribe Duplicator SA: Tutorials
Manage Accounts Feature Overview - continued
View User
This menu allows you to view current existing user accounts.
1. Press the ENT button to enter into this menu. Press the ESC button to go back 
to the main menu or cancel the current selection.
Note: User “Admin” is the administrative account. It will always be 
there.
Create User
This menu allows you to create additional user accounts. Each user has their own 
settings and hard drive partitions. During this process, you will be prompted to enter 
a new user name and user password for a new account.
1. Press the ENT button to enter into this menu. Press the ESC button to go back 
to the main menu or cancel the current selection.
Note: User name can consists of maximum 8 alphanumeric letters or 
numbers.
Note: User password will consist of 4 numbers.
Edit User Info
This menu allows you to change an existing user account’s name and password. You 
will be asked to select an existing user account and then enter a new user name and 
new user password.
1. Press the ENT button to enter into this menu. Press the ESC button to go back 
to the main menu or cancel the current selection.
Manage Accounts1. View UserCOPYTESTPRINTSOURCE
ESCENT


Manage Accounts2. Create UserCOPYTESTPRINTSOURCE
ESCENT


Manage Accounts3. Edit User InfoCOPYTESTPRINTSOURCE
ESCENT

              
						

							www.aleratec.com52
Stand-Alone LightScribe Duplicator SA: Tutorials
Note: User “Admin” is the administrative account, you can NOT 
change the user name for this account, but you will be able to 
change the password for this account.
Note: User name consists of maximum 8 alphanumeric letters or 
numbers.
Note: User password will consist of 4 numbers. 
Delete User
This menu allows you to delete an existing user account. You will be asked to select 
and existing user account to be removed.
1. Press the ENT button to enter into this menu. Press the ESC button to go back 
to the main menu or cancel the current selection.
Note: User “Admin” is the administrative account; you can NOT 
delete this account.
Password on Bootup
This menu allows you to enable/disable the “Manage Accounts” feature upon boot 
up. During this process, you will be asked to select ON or OFF (enable/disable).
1. Press ENT button to enter into this menu. Press the ESC button to go back to 
the main menu or cancel the current selection.
Manage Accounts4. Delete UserCOPYTESTPRINTSOURCE
ESCENT


Manage Accounts5. Password on BootupCOPYTESTPRINTSOURCE
ESCENT

          
						

							www.aleratec.com53
Stand-Alone LightScribe Duplicator SA: Tutorials
Introduction to Duplication Mode
This feature reduces the “Duplication from Hard Drive” process to a single step.
There are three features under “Duplication mode”:
1. On the Fly
2. Load and Copy
3. Prompt
On the Fly
This mode instructs the duplicator to copy directly from the Master Disc. The 
duplicator performs simultaneous read and write operations without any delays.
Advantage:
 ▪Ideal for small quantity quick duplication.
Disadvantage:
 ▪Requires a Master Disc for each and every run. (Could be harmful for the 
Master Disc.)
 ▪Maximum DVD duplication speed is typically limited under 8x.
 ▪Requires the Master Disc to be in excellent condition for error free duplication.
Load and Copy
This mode instructs the duplicator to load your Master Disc into the built-in hard 
drive partition called “Reserved” and make the requested quantity of copies directly 
from the hard drive. The content will remain stored in the “Reserved” partition, 
available for future duplications of the same project until you perform this function 
again with a new master or manually rename or delete the content from Hard Drive 
Setup. Once a new master is used for Load and Copy, the “Reserved” partition will 
be overridden or one will be created if it didn’t exist.
Advantage:
 ▪Faster duplication in a long run. (Un-Restricted DVD Duplication speed 
supported by the duplication blank media.)
 ▪Stable duplication.
 ▪Reliable duplication.
Prompt
If you set to “Prompt”, when you go to 1. Copy, you will be asked if you want to do 
“Load and Copy” or “on the Fly”. If you set Duplication Mode to “Load and Copy” or 
“On the Fly”, you will not be prompted when you go to 1. Copy. The duplicator will do 
what you have selected in Duplication Mode.  
						

							www.aleratec.com54
Stand-Alone LightScribe Duplicator SA: Tutorials
Disadvantage:
 ▪The loading time may have an impact on overall duplication time for small 
duplication jobs.
 ▪The Master Disc will be loaded to the reserve partition in the Hard Drive 
temporarily until a new master is loaded and overrides the previous image. 
In comparing this duplication mode with the traditional “Duplication from 
Hard Drive” process, it offers the user more simplicity. By selecting the 
“Load and Copy” mode via one simple touch, all the necessary tasks will 
be automated for you and loaded on to the “Reserved” partition. You can 
rename the data on the “Reserved” partition and place it in a standard 
partition if you wish to keep it. (This must be done prior to loading a new 
master through “Load and Copy)”.
By default, the duplication mode is set to “Auto”. This will prompt you to choose 
between one of the duplication modes when you enter any of the following 
functions: “Copy”, “Test”, “Test + Copy”, and “Copy + Compare”.
However, if you prefer not to be prompted each time, you can always go to “14. 
Setup” and select sub-menu 9 and manually reset it. To do so, preform the following 
steps:
1. Turn on the duplicator. After the bootup is complete, you will see the following 
display:
2. Press the UP or DOWN button consecutively until you see following display:
3. Press ENT button once. You will see the following display:
4. Press the UP or DOWN button consecutively until you see following display:
DUPLICATOR 1.001. COPYCOPYTESTPRINTSOURCE
ESCENT


DUPLICATOR 1.0014. SetupCOPYTESTPRINTSOURCE
ESCENT


Setup1. LanguageCOPYTESTPRINTSOURCE
ESCENT


Setup9. Duplication ModeCOPYTESTPRINTSOURCE
ESCENT

