Aleratec 127 USB Copy Tower SA USB Flash Drive Duplicator User Guide

www.aleratec.com25
Using the USB Duplicator
6.5	Full	Erase	USB
Full Erase USB is a function what will erase all data on the target USB flash 
drive. 
Note: The Full Erase USB will completely erase data of each of the 
target flash drives This function will also clear the FAT table in the 
flash drive. You will not be able to read the flash drive on PC until it is 
re-formatted. 
 
1. Use UP or DOWN arrow to scroll through the menu until Utility is 
displayed on the LCD screen. Press the OK button to...

www.aleratec.com26
Using the USB Duplicator
Main Menu
7. Setup
This function includes 8 subfunctions. These are: 
7.1 Start-up Menu
7.2 Copy Area
USB Duplicator
7. Setup
OK
ESC


7.3 Button Beep
7.4 Asyn Hold Time
7.5 Ignore Size
7.6 Asynchronous Enable/Disable
7.7 Language
7.8 Working Mode Normal/Turbo    

www.aleratec.com27
Using the USB Duplicator
7.1	Startup	Menu	
Startup Menu allows you to select which function displays first when the USB 
Duplicator is turned on. 
This function selects the menu item that will be the first item shown on the 
display when you turn on the duplicator. The default setting is Copy.
1. Use the UP or DOWN arrow to scroll through the menu until Setup is 
displayed on the LCD screen. Press OK. 
2. Use the UP or Down arrow to scroll through the Setup options until Startup 
Menu...

www.aleratec.com28
Using the USB Duplicator
7.3	Button	Beep
This setting controls the button sound. 
1. Use the UP or DOWN arrow to scroll through the menu until Setup is 
displayed on the LCD screen. Press the OK. 
2. Use the UP or Down arrow to scroll through the Setup options until 
Button Beep is displayed on the LCD screen. 
3. Default setting is ON. Use the UP or DOWN arrows to select either ON 
or OFF. Press the OK button to change, or ESC to exit.
ESC
OK

7. Setup:
3. Button Beep
ESC
OK
...

www.aleratec.com29
Using the USB Duplicator
7.4	Asyn	Hold	 Time
This function allows you to set the time to exit Asynchronous Copying 
when you pull all the USB flash drives out of the duplicator. The default 
setting is 30 seconds. If after 30 seconds no new drives are plugged into 
the USB Duplicator the LCD will ask to exit Asynchronous or to stay in 
Asynchronous mode. Press OK to exit Asynchronous Copying or press 
ESC to keep this status. 
To change the default setting for Asyn Hold Time use the...

www.aleratec.com30
Using the USB Duplicator
7.5	Ignore	Size - continued 
1. Use the UP or DOWN arrow to scroll through the menu until Setup is 
displayed on the LCD screen. Press the OK button to select or press 
ESC to go to the next setting. 
2. Use the UP or Down arrow to scroll through the options until Ignore 
Size is displayed on the LCD screen. Press OK.
3. Default setting is 3% ; press the arrow keys to change and press OK.
Note: Source flash drive and blank drives need to be the same capacity...

www.aleratec.com31
Using the USB Duplicator
7.6	Asynchronous	(Enable/Disable)
This function allows the user to enable/disable asynchronous copying. Use 
Up and Down arrow keys to toggle between and push	OK to select, or ESC 
to exit. 
7.7	Language
This function selects the language shown on the display (English, 
Traditional Chinese, Simplified Chinese, and Japanese). 
To change the default setting for Asyn Hold Time use the following 
procedure:
1. Use the UP or DOWN arrow to scroll through the menu...

www.aleratec.com32
Specifications
Operating Type• Stand-alone (No PC Required)
Number of Targets• 27
Supported Media• USB Flash/Pen Drive requiring less than 500mA 
from USB Port
Transfer Speed• Up to 33MB/s
Copy Mode• Synchronous or Asynchronous
LCD Display• 2 x 16 Backlit
Power Requirements• 115V or 230V
Operating Temperature• 41°F - 122°F
Operating Humidity • 15% - 90%  

www.aleratec.com33
Technical Support
After reading this User Guide, if you need additional assistance with this 
product, please contact Aleratec Technical Support. Our technical staff will 
be happy to assist you, but they may need your help to better assist you. 
Calling Aleratec Technical Support without all the necessary information 
can be both time consuming and frustrating. Therefore, please try to have 
the following information ready before calling:
1. Part Number - the part number is located on...

www.aleratec.com34