Aleratec 124 HDD Copy Cruiser IDESATA HighSpeed WL User Guide

							www.aleratec.com35
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Setup - Unknown Format
This function will allow you to copy non standard formatted HDD.
1. In the Setup menu, use the arrow buttons (or) to select “Unknown 
Format”. The following screen will be displayed. 
 
2. Press OK to select. Use the arrow buttons to scroll between the Copy Unknown 
or Skip Unknown options.  
 
 
 
 
 
 
 
 
 
 
 
 
 
3. Press OK to Copy Unknown or Skip Unknown when formatting hard drives.
 

ESC
OK[ 6. Setup ] 
4. Unknown Format

ESC
OK[ Unknown Format ]
Copy Unknown

ESC
OK[ Unknown Format ]
Skip Unknown  
						

							www.aleratec.com36
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Setup - Transfer Rate
This function will allow you to view and set the trasnfer rate of your drives.
1. In the Setup menu, use the arrow buttons (or) to select “Transfer Rate”. 
The following screen will be displayed. 
 
2. Press OK to select. The following information will be displayed.
 
 
 
 
 
 
3. Use the arrow buttons () to toggle through the available options. Once you 
change a configuration option, remember to press OK to save it. 
 

ESC
OK[ 6. Setup ] 
5. Transfer Rate

ESC
OK[ Transfer Rate ] 
UDMA 5  
						

							www.aleratec.com37
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Setup - Buzzer
This function controls whether the systems built-in buzzer enabled (turned on) or 
disabled (muted).
1. In the Setup menu, use the arrow buttons (or) to select “Buzzer”. The 
following screen will be displayed. 
 
2. Press OK to select. Use the arrow buttons to scroll between the Turn On and 
Mute options.  
 
 
 
 
 
 
 
 
 
 
 
 
3. Press OK to turn on or mute the buzzer sound.
 

ESC
OK[ 6. Setup ] 
6. Buzzer

ESC
OK[ Buzzer ] 
Turn On

ESC
OK[ Buzzer ]
Mute  
						

							www.aleratec.com38
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Setup - Language
This option allows you to select the language that is used for the display. 
1. Use the arrow buttons (or) select “Language”. The following screen 
will be displayed.  
2. Press OK to display the current language selection (the default language is 
English).  
3. Use the arrow buttons () to toggle through the available options. Once 
you change a configuration option, remember to press OK to save it.

ESC
OK[ 6. Setup ] 
7. Language

ESC
OK[ Language ]
English  
						

							www.aleratec.com39
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Setup - Stop Motor Time
This function will allow you to view and set the stop motor time.
1. In the Setup menu, use the arrow buttons (or) to select “Stop Motor Time”. 
The following screen will be displayed. 
 
2. Press OK to select. The following information will be displayed.
 
 
 
 
 
 
3. Use the arrow buttons () to toggle through the available options. Once you 
change a configuration option, remember to press OK to save it. 
 

ESC
OK[ 6. Setup ] 
8. Stop Motor Time

ESC
OK[ Stop Motor Time ] 
5 seconds  
						

							www.aleratec.com40
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Setup - Advanced Setup
The “Advanced Setup” menu contains additional configuration options for the HDD 
Copy Cruiser IDE/SATA High-Speed WL.  

ESC
OK[ 6. Setup ] 
9. Advanced Setup  
						

							www.aleratec.com41
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Setup - Advanced Setup
A.			Wait	HDD	 Time		
This function uses the specified wait time before automatically starting the function 
that was selected.
A1. To edit the Wait HDD Time function, select “Wait HDD Time” and press 
OK. 
 
A2. The following information will be displayed.   
 
 
   
A3. Use the arrow buttons () to toggle through the available options. Once 
you change a configuration option, remember to press OK to save it.  

ESC
OK[ Advanced Setup ]
1. Wait HDD Time

ESC
OK[ Wait HDD Time ] 
15 seconds  
						

							www.aleratec.com42
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Setup - Advanced Setup
B.			Copy	HPA	area		The HPA is a hidden data region defined in ATA/ATAPI-4. This area is not usually accessible to the operating system or software applications. The HDD Copy Cruiser IDE/SATA High-Speed WL supports the copying of data from this hidden area.
B1. To edit the Copy HPA area function, select “Copy HPA area” and press 
OK. 
 
B2. The following options will be displayed.  
 
 
 
 
 
 
 
 
B3. Press OK to select your perfered option. After changing a setting, 
remember to press OK to save it. 

ESC
OK[ Advanced Setup ] 
2. Copy HPA area

ESC
OK[ Copy HPA Area ]
No

ESC
OK[ Copy HPA Area ]
Setting HPA

ESC
OK[ Copy HPA Area ]
Copy and Settings  
						

							www.aleratec.com43
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Setup - Advanced Setup
C.			Adjust	Clock		
This function will allow you to change the time and date.
A1. To edit the Wait HDD Time function, select “Adjust Clock” and press OK. 
 
A2.  The following information will be displayed.   
 
 
   
A3. Use the arrow buttons () to toggle through the available options. Once 
you change a configuration option, remember to press OK to save it.  

ESC
OK[ Advanced Setup ]
3. Adjust Clock

ESC
OK2014/10/07
09:50:00  
						

							www.aleratec.com44
Using the HDD Copy Cruiser IDE/SATA High-Speed WL 
Main Menu
Setup - Restore Default
The Restore Default function will reset all settings to their original values.
1. In the Setup menu, use the arrow buttons (or) to select “Restore Default”. 
The following screen will be displayed. 
 
2. Press OK to select. The following screen will be displayed.
 
 
 
 
 
 
3. Press OK to clear the parameter to default settings.
 

ESC
OK[ 6. Setup ] 
10. Restore Default

ESC
OKWarning:
Clear Parameter To Default?