Aleratec 115 DVDCD Tower Publisher SLS User Guide

www.aleratec.com45
Stand-Alone Tower Publisher LS: Tutorials
Audio CD Editing
This procedure will guide you in using the “Mix Audio Tracks” feature. This process 
allows you to combine audio tracks from various CDs into a single customized 
audio CD.
To use this feature you need a temporary storage location to hold your music before 
the duplicator can make it an audio CD. The following are temporary storage 
location choices:
• Hard Drive:
Choosing “Hard Drive” as the temporary storage location, you...

www.aleratec.com46
Stand-Alone Tower Publisher LS: Tutorials
4. Once you made your selection, you will see the following display:
OR
When you see the above display, insert an audio CD that contains your music 
track(s) in the Master Reading Tray and a blank CD-R media into one of Writer 
Trays.
Note: If either one of the above screens is shown for more than 2 
minutes, please check your Master Disc or Blank Discs for quality.
Please allow 5-10 seconds for the duplicator to detect your Master Disc and...

www.aleratec.com47
Stand-Alone Tower Publisher LS: Tutorials
Audio CD Editing - continued 
6. Press ENT button to submit your selection. You will see the following display:
Warning: If the capacity of total audio tracks you have selected is 
more than your blank CD-R disc’s capacity, you will see the following 
two screens flashing:
If you see the above messages, press ENT button to continue.
Once the Copying process is complete, you will see the following display:
7. You now have the choice to finalize...

www.aleratec.com48
Stand-Alone Tower Publisher LS: Tutorials
8. Press ENT button to continue. Your old Master Disc will be ejected and you can 
insert another audio CD into the Reading Tray. To continue, go back to Step 3.
9. If you choose to finalize it, press the DOWN arrow button until you see the 
following display:
Press the ENT button to continue. You will see following confirmation display:
Press the ENT button again to confirm the finalization. During the finalization 
process, you will see...

www.aleratec.com49
Stand-Alone Tower Publisher LS: Tutorials
Audio CD Editing - continued
Example of Mixing Audio Tracks to the Hard Drive  
In this example we will be creating a new Audio CD from 2 different discs: 
 ▪CD1: song 2, and song 4
 ▪CD2: song 3, song 4 and song 5
1. Go to function 13 “Mix Audio Tracks”.
2. Press ENT button.
3. Use the UP or DOWN arrow button to select “Hard Drive”. Press ENT button to 
continue.
4. Insert CD1 into the 1st Drive and a blank CD into the 2nd Drive.
5. Wait until...

www.aleratec.com50
Stand-Alone Tower Publisher LS: Tutorials
8. Use the UP or DOWN arrow button until you see following display:
9. Press ENT to submit your selection. You will see the following display:
10. Once the loading process is complete, you will see the following display:
11. To continue with your music selections, press the DOWN button once and you 
will see following display:
12. Press ENT button to continue. Insert CD2 into the Reader Tray. When CD2 is 
recognized you will see the following...

www.aleratec.com51
Stand-Alone Tower Publisher LS: Tutorials
Audio CD Editing - continued
14. Use the UP or DOWN arrow button until you see “Track 4” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 4”. You will see the following display:
15. Use the UP or DOWN arrow button until you see “Track 5” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 5”. You will see the following display:
16. Use the...

www.aleratec.com52
Stand-Alone Tower Publisher LS: Tutorials
20. Press the ENT button again to confirm. You will see the following display:
21. When the process is complete, your mixed copy will be ejected. You will see 
the following display:
You will then be directed back to the main menu:
Processing to Disc...  10%COPYTESTPRINTSOURCE
ESCENT


Job Completed!Press OK to FinishCOPYTESTPRINTSOURCE
ESCENT


DUPLICATOR  1.0013. Mix Audio TracksCOPYTESTPRINTSOURCE
ESCENT

              

www.aleratec.com53
Stand-Alone Tower Publisher LS: Tutorials
Introduction to Manage Accounts 
The “Manage Accounts” feature allows the administrator to:
• Create user accounts and passwords to prevent unauthorized use of the 
duplicator.
• View existing user account lists.
• Edit existing user account information, including name and password.
• Delete existing user account(s).
• Enable/Disable the Manage Accounts feature.
The “Manage Accounts” feature is disabled by default. Prior to activating this...

www.aleratec.com54
Stand-Alone Tower Publisher LS: Tutorials
Manage Accounts: Overview
To access the “Manage Accounts” feature, perform the following steps:
1. Turn on the duplicator. After the bootup is complete, you will see the following 
display:
2. Press the UP or DOWN button consecutively until you see following:
3. Press ENT. You will be asked for the Administrator’s Password.
By default, the Administrator’s Password is “0000”. To enter that, press UP 
or DOWN button to select the first digit of...