Aleratec 115 DVDCD Tower Publisher SLS User Guide

www.aleratec.com35
Stand-Alone Tower Publisher LS: Tutorials
Select the Source Drive - continued 
b. Enter “Source Selection” menu.
Press ENT to enter into “Source Selection” menu.
You will see the following display:
c. Select desired master reading device.
Press the UP or DOWN button to select the desired master reading source. 
Then press ENT to submit your Source Selection.
d. Once your selection has been changed successfully, you shall see the 
following screen for 2 seconds:
Then you will be...

www.aleratec.com36
Stand-Alone Tower Publisher LS: Tutorials
Load Master Disc onto the Hard Drive
In order to copy from the Hard Drive, you are required to load your Master Disc 
onto a hard drive partition.
The number of partitions the hard drive can hold is determined by the capacity of 
your hard drive and the size of the partitions you created.
For example, if you have an 80GB Hard Drive with a system capacity of 74GB.* 
You can load 74 CDs or 19 DVDs (given a 4GB average capacity).
*There are many...

www.aleratec.com37
Stand-Alone Tower Publisher LS: Tutorials
Load Master Disc onto the Hard Drive - continued 
c. Press ENT to submit your selection. After your selection has been 
submitted, you will see the following display:
2. Load your Master Disc onto the Hard Drive.
a. Use the UP or DOWN arrow button to navigate to the following screen.
b. Press ENT to enter “Hard Drive Setup” menu and you will see the 
following display:
c. Load your Master Disc on to the Hard Drive. To do so, use the UP or 
DOWN...

www.aleratec.com38
Stand-Alone Tower Publisher LS: Tutorials
e. You now have the choice to load your Master Disc into a new (empty) 
partition or overwrite one of the existing partitions (if any exist) by 
inputting/modifying the name you desire; or you can simply choose “Auto 
Generate” to have the system automatically generate a partition name for 
you. Afterwards, simply press the UP or DOWN arrow button to find your 
desired selection and press ENT to submit your selection. You will see the...

www.aleratec.com39
Stand-Alone Tower Publisher LS: Tutorials
Load Master Disc onto the Hard Drive - continued
h. Press ENT button to confirm. Once your Master Disc has been recognized. 
The loading progress indicator will be displayed and you shall see the 
following:
i. Once your Master Disc has been loaded completely, you will see the 
following display:
Press the ENT button to go back to the “Hard Drive Setup” menu.
“4000MB” indicates the total capacity of your Master Disc.
“423MB” indicates the...

www.aleratec.com40
Stand-Alone Tower Publisher LS: Tutorials
Rename Existing Hard Drive Partition Name
When you load your Master Disc to a hard drive partition, you are asked to give it a 
name. You can rename it at anytime afterwards (including the Reserved Partition). 
To rename your existing hard drive partition name, do the following:
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter “Hard Drive Setup” menu. You will see the following display:
3. Use the UP...

www.aleratec.com41
Stand-Alone Tower Publisher LS: Tutorials
Rename Existing Hard Drive Partition Name - continued
7. Rename the partition you’ve just selected.
To enter a partition name, use the UP or DOWN button to select the character 
and use ESC or ENT button to move the cursor position. When you are 
finished, move the cursor to OK and press ENT. For example, if I want to 
rename the image from “FUN” to “FUN2”, do the following:
a. Move the cursor to the forth position by pressing ENT until you...

www.aleratec.com42
Stand-Alone Tower Publisher LS: Tutorials
Delete Existing Hard Drive Partition Permanently
If for some reason you need to delete your existing hard drive partition permanently, 
do the following:
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter “Hard Drive Setup” menu. You will see the following display:
3. Use the UP or DOWN arrow button to navigate to the following screen.
4. Press ENT to enter the “Delete Partition” menu.  You will see...

www.aleratec.com43
Stand-Alone Tower Publisher LS: Tutorials
Delete Existing Hard Drive Partition Permanently - continued 
7. You will be directed back to the “Hard Drive Setup” menu. You will see the 
following display:
Hard Drive Setup4. Delete PartitionCOPYTESTPRINTSOURCE
ESCENT

      

www.aleratec.com44
Stand-Alone Tower Publisher LS: Tutorials
Change the SETUP Settings
Most of the internal settings and information are stored inside the “Setup” menu. To 
explore and modify these settings is simple. In the following example you will be 
modifying the “Auto Start” setting. 
Note: The default “Setup” is set for optimal performance. It is unnecessary 
to change this setting if you are satisfied with your duplicator performance.
1. Use the UP or DOWN arrow button to navigate to the...