Aleratec 115 Bluray DVD CD Tower Publisher SLS Duplicator User Guide

www.aleratec.com65
Men\f Overview
16.	Manage	Accounts
This feature allows the administrator the ability to:
 ▪Create user accounts and passwords to prevent unauthorized use of this 
duplicator.
 ▪View existing user account lists
 ▪Edit existing user account information, including name and password.
 ▪Delete existing user account(s).
 ▪Enable/Disable this feature.
17.	Autocopy
This function will allow the system to operate under the “Autocopy” mode 
for ease of operation. 
18.	Shutdown
This function will...

www.aleratec.com66
Tro\fbleshooting
1.	No	display	on	LCD	or	the	unit	does	not	operate	when	the	power 	is	on.
 ▪Check the power cable connection and the power outlet.
 ▪Make sure the power voltage matches the voltage of your power outlet.
 ▪If the duplicator was stored in a location where the temperature dropped 
below 32°F (0°C) within the past 24 hours, leave the duplicator in a warm 
room with temperatures at least 65°F (19°C) for 4 hours prior to powering 
it on.
2.	Cannot	read	source	disc.
 ▪Check...

www.aleratec.com67
Tro\fbleshooting
7.	Cannot	boot-up	or	fails	to	upgrade	firmware.
 ▪Contact our Tech Support.
8.	Can	I	load	data	directly	from	my	computer 	to	my	duplicator’s	Hard	Drive?
 ▪No, your duplicator’s Hard Drive has a unique file system that computers 
will not recognize. Thus, you can’t perform any read/write operations to the 
Hard Drive from your computer.
9.	How	do	I	reset	my	duplicator	back	to	default?
a. Use UP or DOWN arrow button to navigate to the following screen.
b. Press ENT to...

www.aleratec.com68
Tro\fbleshooting
Error Codes
Typically the system will show an error message and error code if a problem occurs. 
Please reference the below diagram for a description of the error codes and the 
recommend solution:
Error CodeError MessageRecommendation
200Master Disc EmptyBlank Disc is in the Source Tray. Make sure thesource is properly selected and double check theMaster Disc.
201Bad MasterThe Master Disc is not recognized by the SourceTray. Please eject and reload the Master Disc...

www.aleratec.com69
Tro\fbleshooting 
Error CodeError MessageRecommendation
213DVD-RAM is not supported!The system does NOT support DVD-RAM format.
230Not enough HDD spaceThere is not enough hard drive space to create anew partition. Please delete some existing nonimportant partition to free up more spaces.
231Redundant NameThe Partition Name you’ve entered has already been used. Please choose a different partition name.
232Format Failed!Unable to format the built in hard drive. It is likelythe hard drive...

www.aleratec.com70
Recommended Media \B
Certified LightScribe media is required for burning direct-to disc LightScribe labels. 
For best results, Aleratec Duplicator Grade LightScribe media is recommended.
CD-R LightScribe V1.2 Duplicator Grade Media 100 Pack™  Part No. 110116 
CD-R LightScribe V1.2 Duplicator Grade Media 600 Pack™  Part No. 110120
CD-R LightScribe V1.2 Duplicator Grade Rainbow 100 Pack™   Part No. 110117
DVD-R LightScribe V1.2 Duplicator Grade Media 100 Pack™  Part No. 230114
DVD-R...

www.aleratec.com71
Technical S\fpport
After reading this User Guide, if you need additional assistance with this product, 
please contact Aleratec Technical Support. Our technical staff will be happy to assist 
you, but they may need your help to better assist you. Calling Aleratec Technical 
Support without all the necessary information can be both time consuming and 
frustrating. Therefore, please try to have the following information ready before 
calling:
1. Part Number - the part number is located...

www.aleratec.com72
Service and S\fpport\B
 Aleratec, Inc., Li\Bmited Warranty
This Limited Warranty covers defects encountered in the course of normal 
use of this product and does not apply to damage from improper use, abuse, 
accidents, unauthorized service, or inadequate packaging when shipping the 
product to Aleratec, Inc.
Aleratec, Inc. provides the following limited warranty for this product only if 
the product was originally purchased for use, not re-sale, from Aleratec, Inc., 
an Aleratec, Inc....

www.aleratec.com73
Service and S\fpport\B
Please Note:
This Warranty is valid only within the United States and Puerto Rico, and 
applies only to products that are new and unopened on the date of purchase. For 
areas outside the United States and Puerto Rico, contact the authorized dealer 
from whom you purchased this product to determine which warranty, if any, 
applies.
THIS LIMITED WARRANTY CONSTITUTES YOUR SOLE AND 
EXCLUSIVE REMEDY, AND THE SOLE AND EXCLUSIVE LIABILITY 
OF ALERATEC, INC., AND IS IN...

www.aleratec.com74
Service and S\fpport\B
To Obtain Warranty Service:
You must ship your subsystem to the authorized dealer where your subsystem 
was purchased within the one year warranty period and no later than thirty 
days after discovery of claimed defect, whichever occurs first. In either case, 
you must provide proof of original purchase before any warranty service can 
be performed. Products and parts provided as a result of warranty service may 
be other than new but will be in good working...