Home
>
Aleratec
>
Hard Disk
>
Aleratec 111 HDD Copy Cruiser IDESATA 11 HDD Duplicator and 12 HDD Sanitizer User Guide
Aleratec 111 HDD Copy Cruiser IDESATA 11 HDD Duplicator and 12 HDD Sanitizer User Guide
Here you can view all the pages of manual Aleratec 111 HDD Copy Cruiser IDESATA 11 HDD Duplicator and 12 HDD Sanitizer User Guide. The Aleratec manuals for Hard Disk are available online for free. You can easily download all the documents as PDF.
Page 51
www.aleratec.com45 Using the 1:11 HDD Copy Cruiser IDE/SATA Main Menu Adv Setup Adv Setup: Copy HPA If the source hard disk contains a Host Protected Area (HPA), this option allows you to choose whether or not to copy data within the HPA. 1. Press and hold ESC for about three seconds to access the “Adv Setup” menu. The following screen will be displayed. 2. Use the arrow buttons (or) to select “Copy HPA”. The following information will be displayed. 3. Press ENT to display the current...
Page 52
www.aleratec.com46 Using the 1:11 HDD Copy Cruiser IDE/SATA Main Menu Adv Setup Adv Setup: Burn In This function is used to burn in all HDD 1. Press and hold ESC for about three seconds to access the “Adv Setup” menu. The following screen will be displayed. 2. Use the arrow buttons (or) to select “Burn In”. You will have four Burn In options. 3. Press ENT to display the current configuration setting. A screen similar to the following will be displayed. 4. Use the arrow buttons () to select an...
Page 53
www.aleratec.com47 Specifications Power Requirements100V-240V AC, 50/60Hz Dimensions(length x width x height)D: 416mm W: 191mm H: 648mm Weight15.9 Kilograms Note: Specifications subject to change without notice. Troubleshooting If your 1:11 HDD Copy Cruiser IDE/SATA is not performing as expected, refer to the symptoms below, and follow the suggested corrective action. SymptomsCorrective Actions LCD DisplayIf the LCD display does not display any message and the backlight is not lit after powering...
Page 54
www.aleratec.com48 Technical Support After reading this User Guide, if you need additional assistance with this product, please contact Aleratec Technical Support. Our technical staff will be happy to assist you, but they may need your help to better assist you. Contacting support without all the necessary information can be both time consuming and frustrating. Therefore, please try to have the following information ready before calling: 1. Part Number - the part number is located on the bottom of...
Page 58
www.aleratec.com52 Technical Support FAX Back Form Aleratec, Inc. Technical Support Fax Back Form Please record the following information to help expedite any warranty claim: Model No.: _________________Serial No.: _______________________________ Date Purchased: ______________________________________________________ Place of Purchase: _____________________________________________________ Firmware Version: ________________ HDD Brand and Model: _______________ To: Technical Support Group FAX:...
Page 59
Document Number: 350124_ENG_Rev. A Copyright © 2013 Specifications subject to change without notice. Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A. www.aleratec.com