Home
>
Albrecht
>
Communications receiver
>
Albrecht AE77H Programmable Hand-Held-Scanner Operating Guide
Albrecht AE77H Programmable Hand-Held-Scanner Operating Guide
Here you can view all the pages of manual Albrecht AE77H Programmable Hand-Held-Scanner Operating Guide. The Albrecht manuals for Communications receiver are available online for free. You can easily download all the documents as PDF.
Page 3
3 Before you use this scanner, please read and observe the following: Earphone Warning!The output of the Phone jack is monaural. Set the volume to a comfortable audio level coming from the speaker before plugging in the monaural earphone. Otherwise you might experience some discomfort or possible hearing damage if the volume suddenly becomes too loud because of the volume control or squelch control setting. This may be particularly true of the type of earphone that is placed in the canal. Warning!Uniden...
Page 4
4 1. Display 2. Numeric keypad 3. Enter 4. Band/Limit 5. Monitor/Clear 6. Speaker 7. Scan Mode 8. Manual Mode 9. Priority 10. S/S (Search Skip), L/O (Lock Out) 11. LIGHT/Keypad Lock 12. Step/Program 13. / Function Keys 1 2 7 10 8 11 12 6 5 3 134 13 9 Controls and Indicators 21 24 18 23 22 2019 14. Antenna Connector 15. Phone Jack 16. Squelch Control 17. On/Off Volume Control Included in Your Package •Antenna •Belt clip •Screw (2) •This Operating Guide 18. Search indicator 19. Frequency Display 20....
Page 5
5 Contents Introduction . . . . . . . . . . . . . . . . . . . .6What is Scanning? . . . . . . . . . . . . .6 Feature Highlights . . . . . . . . . . . . . . .6 Setup . . . . . . . . . . . . . . . . . . . . . . . .6 Installing the Batteries . . . . . . . . . . .7 AC Adapter/Charger (not supplied) .7 Charging Warning . . . . . . . . . . . . . .7 Flexible Antenna . . . . . . . . . . . . . . .7 Belt Clip . . . . . . . . . . . . . . . . . . . . .7 Basic Operation . . . . . . . . . . . . . . . . .8...
Page 6
6 The AE 77 H Hand Scanner is a sophisticated information radio that allows you to monitor 6 different frequency bands. It is a state-of-the-art radio with scanning capabilities, and it can save up to 100 different frequencies in memory. What is Scanning?Unlike standard AM or FM radio stations, most two-way communications do not transmit continuousl y. The AE 77H scans programmed channels until it finds an active frequency. Scanning stops on an active frequency and remains on that channel as long...
Page 7
7 Charging WarningDo not charge alkaline batteries in this scanner. Doing so may cause serious damage to the product and void the warranty. Before attempting to recharge batteries, make sure you have installed four rechargeable nickel-cadmium batteries. Flexible AntennaAttach the flexible antenna to the BNC connector. Belt ClipDo not tighten the screws too tight. You can damage the case or clip. Installing the Batteries 1. Open the cover. 2. Insert batteries according to thepolarity symbols inside the...
Page 8
8 KeylockKeylock prevents accidental key entries during scanning. 1. To lock the keypad, press until KEYLOCK appears. 2. To unlock the keypad, press until KEYLOCK disappears. Note:See page 4 for function keys, controls and indicators while reading this guide. Setting the SquelchTo set the squelch, you must be in the manual mode. No signal should be present when adjusting squelch. 1. Press until you do not hear a signal. 2. Adjust VOLUMEto a comfortable listening level. 3. Think of the Squelch Control...
Page 9
9 Before the AE 77 H can receive radio broadcasts, you must program a frequency into at least one channel. Before scanning, repeat this procedure for each channel you program. 1. Press . 2. Select a channel. a) Enter the channel number. b) Then press /PROG. 3. Enter the frequency. a) Enter the frequency number. b) Then press . Note:To clear a mistake while entering the frequency, press /MON/CLR twice, and start over. STEP ProgrammingIf the frequency entered is outside the frequency range of the...
Page 10
10 Scanning When you turn on the power, theAE 77 H automatically starts in the scan mode. During normal scanning the scanner skips unprogrammed or locked out channels. When a transmission is received, the scanner stops on that channel. When the transmission ends, scanning resumes automatically after two seconds. Channel LockoutYou can lockout any channel so it is not reviewed during normal scanning. You can restore the channel to scanning whenever you wish. Lockout in Manual Mode 1. Press . To stop on a...