Alarm Lock PDL3000 ETPDL PDL3500 Programming Instructions User Manual

31 
Groups and Scheduled Group 1 Examples (contd.) 
Functions 90/91:  Use Function 90 and 91 (see page 28) to create a window of time where if any Group 1 User Code is entered within the 
programmed window, a Relay will be activated for 2 seconds.  The Relay can be configured to disarm a burglary control panel.  See page 28. 
 
1.    Enter Program Mode (if not in already). 
2.    Connect Relay to a burglar control panel with switch input for disarming. 
3.    Using Function 2, create User 4 with a User...

32 
Function 
Number(s) Function Name Programming  
43/44 Clock Adjust    
52/53/54 Pass Time          (3 sec) †     10 sec †    15 sec †  
60 Set Lockout Attempts   
61 Set Lockout Time     
64/65 Remote Input Momentary          (Enable) †    Disable †   
66 Ambush Code   
67 Add Relay/System Features 
 
   
69/70 Enter Key Enable †    (Disable) †   
  
+/-    0-55  
 (0) (0) Seconds 
 1-9 Attempts 
(6)  
  1-60 seconds 
(1) (8)  
Default Values are shown in parentheses. 
  00-99 
(9) (9) Ambush Code...

33 
User Number 
(1-2000) User Code  
(3-6 digits)  User Name 
       1 2 3 4  
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
Group  
Association 
  
For a complete list of user...

34 
 Day(s)  
 
   
 
 
Function Number Up to 500 scheduled functions can be programmed (Up to 
only 150 using AL-DTM2).  For Day Enter : 
1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday 
5 = Thursday, 6 = Friday, 7 = Saturday, 8 = Monday through 
Friday, 9 = Saturday and Sunday, 0 = All days of the week 
Enter time of day in 24-hour format (00:00- 23:59)  
 
Time  
 
Function Name 
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :...

35 
ACCESS = Entry into a restricted area. 
AMBUSH = A special Code entered at the keypad when the User is 
forced to unlock a device.  The device unlocks but sends a silent 
alarm with no indication at the keypad.  Can be used to trip a 
relay, to alert security, or trip a silent alarm on a Burglary Control 
Panel. 
AUDIT TR AIL = A date/time stamped log of previous lock events. 
BURGLARY CONTROL PANEL = Provides local alarm and remote 
communication to request security for burglary/break-in.  A...

36 
PROGRAM MODE = A mode allowing program/data to be entered 
through the keypad.  Only specific Users can program a lock 
manually, by entering their USER CODE, followed by the [;] 
key.  To exit program mode, hold any key until repeated beeps are 
heard. 
PROGRAMMABLE RELAY FUNCTIONS = The relay can be 
programmed for one or more functions. 
RELAY = Switched output allowing remote control of other devices.  
For an explanation of all relay features, see Function 67 on page 
25.   
REMOTE INPUT = Entry...