Alarm Lock DL5300 Programming Manual

							31 
Function 
Number(s) Function Name Programming  
43/44 Clock Adjust    
52/53/54 Pass Time          (3 sec) †     10 sec †    15 sec †  
60 Set Lockout Attempts   
61 Set Lockout Time     
64/65 Remote Input Momentary          (Enable) †    Disable †   
67 Add Relay/System Features   
69/70 Enter Key Enable †    (Disable) †   
  
+/-    0-55  
 (0) (0) Seconds 
 1-9 Attempts 
(6)  
  1-60 seconds 
(1) (8)  
Default Values are shown in parentheses. 
Check all that apply   
29. Toggle Passage Mode † 
30. Forced Unlock Follows Remote Input † 
32. Remote Input Disables Unit † 
34. Forced Lock Follows Remote Input † 
33. Remote Input Puts Unit in PC Communication Mode † 
24.  One Time Access for Group 3 Users † 
25. Disable Sounder † 
26. 5 sec. Delayed Entry  † 
27. 15 sec. Delayed Entry  † 
28. 45 sec. Delayed Entry  †  
						

							32 
User Number 
(1-2000) User Code  
(3-6 digits)  User Name 
       1 2 3 4  
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
            
Group  
Association 
  
For a complete list of User Codes, obtain a printout from either the remote printer 
(Program Function 56) or by using the DL-WINDOWS software. 
Note:  
						

							33 
 Day(s)  
 
   
 
 
Function Number Up to 500 scheduled functions can be programmed (Up to 
only 150 using AL-DTM).  For Day Enter : 
1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday 
5 = Thursday, 6 = Friday, 7 = Saturday, 8 = Monday through 
Friday, 9 = Saturday and Sunday, 0 = All days of the week 
Enter time of day in 24-hour format (00:00- 23:59)  
 
Time  
 
Function Name 
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :  
  :   
						

							34 
ACCESS = Entry into a restricted area. 
AUDIT TRAIL = A date/time stamped log of previous 
lock events. 
CLOCK 
•REAL TIME CLOCK = An accurate built-in clock 
that allows date/time stamping of events.  The 
clock can be slowed or speeded up to fine tune 
long term accuracy to within three minutes per 
year. 
•CLOCK SETTINGS = Printout includes date, 
time, weekday, and clock speed. 
•CLOCK SPEED = The clock can be adjusted to 
allow faster/slower speeds and therefore 
increasing clock accuracy. 
CODE = Numeric sequence of numbers (such as: 
1234) entered at the keypad.  If Star-Enter-Key is 
required, must be followed by a [:] key. 
•BASIC USER CODE = User Codes assigned to 
User Numbers 12+ (except Users 297-300).  
(Does not allow programming) 
•INSTALLER CODE = User Codes assigned to 
User Numbers 2 and 3.  (Allows all programming 
except Master functions). 
•INVALID CODE = A User Code that has not been 
programmed in the lock. 
•MANAGER CODE = User Codes assigned to 
User Numbers 4 through 6.  (Allows most of the 
programming functions). 
•MASTER CODE = User Code assigned to User 
Number 1.  Default (factory) Master Code is 
123456.  The User with the Master Code has 
complete control of the lock. 
•PRINT ONLY USER CODE = User Code as-
signed to Users 10 and 11.  (Allows no 
programming except print functions). 
•QUICK ENABLE USER 300 CODE = Refers to 
the User Code entered by User 297 which 
(when entered at the keypad) enables the User 
Code assigned to User 300 for one time only.   
•QUICK PC ACCESS CODE = Permits upload/
download to DL-Windows Software on IBM/
compatible computer running Microsoft Windows 
95, 98, or NT 4.0.  Refers to the User Code for 
User 298. 
•SERVICE CODE = User 300 User Code.  Allows 
only one entry, then needs to be re-enabled by the User 297 User Code to regain access. 
•SUPERVISOR CODE = User Codes assigned to 
Users 7, 8 and 9.  Can only program day-to-day 
operation. 
•USER CODE = Code used by Users.  Code is 3 
to 6 numeric digits long, allowing controlled 
entry. 
•VALID CODE = An entered User Code that has 
been programmed in the device. 
 
COM PORT = A computer serial communications port 
used to communicate with the Lock and/or Data 
Transfer Module. 
DATA TRANSFER MODULE = A device that permits 
transfer of program/data between a computer and 
the lock. 
DATE = Month, Day and Year entered as MMDDYY. 
DAY OF WEEK = Sunday through Saturday (where 1 
= Sunday and 7 = Saturday). 
DEFAULT = Default settings are the original settings 
that were set at the factory; in other words, it is the 
locks original factory condition when the lock was 
first taken out of its box.  The default settings are 
permanently encoded within the locks fixed mem-
ory, and when the lock is first started, or when 
power is removed and re-applied (see Wiring and 
Power-Up, page 11), the original factory default set-
tings are re-loaded and take effect. 
DISABLE = Turn off. 
DOOR NUMBER = Identification of each door with a 
specific number (1-96). (Used with AL-DTM 
Transfer Module) 
DOWNLOAD = Send data to lock or AL-DTM. 
ENABLE = Turn on. 
EVENTS = Recorded lock activity. 
FUNCTION (also called Programming Functions) = 
are the numbers used to program lock features 
(enabling/disabling Users, User Groups, Passage 
Mode, Schedules, etc.). 
GROUP 
•USER GROUP = Defining a User to specific 
Groups, allows User entry when the Group is 
allowed entry. 
•GROUP 1 DISARMS BURGLAR CONTROL = A 
Group 1 USER CODE entry can disarm an 
Glossary  
						

							35 
alarm panel during a predefined schedule.  
Should the Group 1 enter the lock outside of the 
scheduled time, the alarm will not disarm. The 
alarm panel must be armed through other means 
(such as an Alarm Panel Keypad).  The Burglary 
Alarm Panel must be programmed to disarm from 
an Armed State Only and the zone input must be 
programmed for input disarming. 
•GROUP 1 ENABLES GROUP 4 USERS = A Group 
1 USER CODE entry during a predefined 
schedule will allow access to Group 4 Users. 
•GROUP 1 PUTS UNIT IN PASSAGE = A Group 1 
USER CODE entry during a pre-defined schedule 
will unlock unit. 
INSTALLER = See.... CODE, INSTALLER CODE. 
KEYPAD = 10-numeric keys, : and special ; 
key. 
•KEYPAD LOCKOUT = Keypad is programmed to 
lockout Users, for a specified period of time, when 
a specified number of invalid User Codes are en-
tered. 
•KEYPAD PROGRAMMING = Ability to program the 
lock through the keypad. 
KEYPRESS = Pressing a button on the Lock’s Keypad. 
LEVEL ABILITY = Predefined User Types (such as 
Master, Installer, Manager, Supervisor, and Print 
Only User) have specific abilities to program and/or 
control the lock. 
LOCKOUT ATTEMPTS = A specified number of invalid 
User Code entries (1-9), that will disable the keypad 
for a predefined period of time (1-60 seconds). 
LOCKOUT TIME =  A predefined time (1-60) seconds 
that the lock will stop accepting User Codes, after a 
specified number of invalid User Code entries (1-9). 
LOG = See... AUDIT TRAIL. 
MANAGER = See... CODE, MANAGER CODE. 
MASTER = See... CODE, MASTER CODE. 
PASSAGE = Allow anyone to pass through the door 
without USER CODES (door is unlocked). 
PRINTER = A printout device such as an infrared printer 
or computer printer. 
PROGRAM MODE = A mode allowing program/data to 
be entered through the keypad.  Only specific Users 
can program a lock manually, by entering their USER 
CODE, followed by the [;] key.  To exit program 
mode, hold any key until repeated beeps are heard. REMOTE INPUT = Entry into a restricted area, by 
pressing a button connected to the REMOTE INPUT 
WIRES (White and White) by someone on the other 
side of the door. 
SCHEDULE = A programmed operation (enable/
disable, lock/unlock, etc.) on a specific day (Sunday 
through Saturday) and time. 
SCHEDULES, QUICK = Any one of four most common 
types of schedules can be programmed. 
TIME = Hours and Minutes in the HHMM format. 
TIME/DATE STAMP = A recorded date and time that an 
event occurred. 
TIMEOUT = Immediate operation for a specified number 
of hours. 
UPLOAD = Receive data from the lock or AL-DTM. 
USER = A person who has been provided with a USER 
CODE for access through the door. 
USER LOCKOUT, TOTAL = All Users (except for 
Master Code) have been locked out. 
Glossary (contd)  
						

							36 
ALARM LOCK SYSTEMS, INC. (ALARM LOCK) 
warrants its products to be free from manufacturing 
defects in materials and workmanship for 24 months 
following the date of manufacture. ALARM LOCK will, 
within said period, at its option, repair or replace any 
product failing to operate correctly without charge to the 
original purchaser or user. 
This warranty shall not apply to any equipment, or any 
part thereof, which has been repaired by others, 
improperly installed, improperly used, abused, altered, 
damaged, subjected to acts of God, or on which any 
serial numbers have been altered, defaced or removed. 
Seller will not be responsible for any dismantling or 
reinstallation charges. 
THERE ARE NO WARRANTIES, EXPRESS OR 
IMPLIED, WHICH EXTEND BEYOND THE 
DESCRIPTION ON THE FACE HEREOF. THERE IS 
NO EXPRESS OR IMPLIED WARRANTY OF 
MERCHANTABILITY OR A WARRANTY OF FITNESS 
FOR A PARTICULAR PURPOSE. ADDITIONALLY, 
THIS W ARRANTY IS IN LIEU OF ALL OTHER 
OBLIGATIONS OR LIABILITIES ON THE PART OF 
ALARM LOCK. 
Any action for breach of warranty, including but not 
limited to any implied warranty of merchantability, must 
be brought within the six months following the end of 
the warranty period. IN NO CASE SHALL ALARM 
LOCK BE LIABLE TO ANYONE FOR ANY 
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR 
BREACH OF THIS OR ANY OTHER WARRANTY, 
EXPRESS OR IMPLIED, EVEN IF THE LOSS OR 
DAMAGE IS CAUSED BY THE SELLERS OWN 
NEGLIGENCE OR FAULT. 
In case of defect, contact the security professional who 
installed and maintains your security system. In order 
to exercise the warranty, the product must be returned 
by the security professional, shipping costs prepaid and 
insured to ALARM LOCK. After repair or replacement, 
ALARM LOCK assumes the cost of returning products 
under warranty. ALARM LOCK shall have no obligation 
under this warranty, or otherwise, if the product has 
been repaired by others, improperly installed, 
improperly used, abused, altered, damaged, subjected 
to accident, nuisance, flood, fire or acts of God, or on 
which any serial numbers have been altered, defaced 
or removed. ALARM LOCK will not be responsible for 
any dismantling, reassembly or reinstallation charges. 
This warranty contains the entire warranty. It is the sole 
warranty and any prior agreements or representations, 
whether oral or written, are either merged herein or are 
expressly canceled. ALARM LOCK neither assumes, 
nor authorizes any other person purporting to act on its behalf to modify, to change, or to assume for it, any 
other warranty or liability concerning its products. 
In no event shall ALARM LOCK be liable for an amount 
in excess of ALARM LOCKs original selling price of the 
product, for any loss or damage, whether direct, 
indirect, incidental, consequential, or otherwise arising 
out of any failure of the product. Sellers warranty, as 
hereinabove set forth, shall not be enlarged, diminished 
or affected by and no obligation or liability shall arise or 
grow out of Sellers rendering of technical advice or 
service in connection with Buyers order of the goods 
furnished hereunder. 
ALARM LOCK RECOMMENDS THAT THE ENTIRE 
SYSTEM BE COMPLETELY TESTED WEEKLY. 
Warning: Despite frequent testing, and due to, but not 
limited to, any or all of the following; criminal tampering, 
electrical or communications disruption, it is possible for 
the system to fail to perform as expected. ALARM 
LOCK does not represent that the product/system may 
not be compromised or circumvented; or that the 
product or system will prevent any personal injury or 
property loss by burglary, robbery, fire or otherwise; nor 
that the product or system will in all cases provide 
adequate warning or protection. A properly installed 
and maintained alarm may only reduce risk of burglary, 
robbery, fire or otherwise but it is not insurance or a 
guarantee that these events will not occur. 
CONSEQUENTLY, SELLER SHALL HAVE NO 
LIABILITY FOR ANY PERSONAL INJURY, 
PROPERTY DAMAGE, OR OTHER LOSS BASED ON 
A CLAIM THE PRODUCT FAILED TO GIVE 
WARNING. Therefore, the installer should in turn 
advise the consumer to take any and all precautions for 
his or her safety including, but not limited to, fleeing the 
premises and allege police or fire department, in order 
to mitigate the possibilities of harm and/or damage. 
ALARM LOCK is not an insurer of either the property or 
safety of the users family or employees, and limits its 
liability for any loss or damage including incidental or 
consequential damages to ALARM LOCKs original 
selling price of the product regardless of the cause of 
such loss or damage. 
Some states do not allow limitations on how long an 
implied warranty lasts or do not allow the exclusion or 
limitation of incidental or consequential damages, or 
differentiate in their treatment of limitations of liability for 
ordinary or gross negligence, so the above limitations 
or exclusions may not apply to you. This Warranty 
gives you specific legal rights and you may also have 
other rights which vary from state to state. 
ALARM LOCK LIMITED WARRANTY