Alarm Lock DL5300 Programming Manual

21 
; 4 5 : 45. Enable Passage Mode (This Function enabled through keypad only) 
; 4 6 : 46. Disable Passage Mode (This Function enabled through keypad only) 
47. Timed Passage Mode (This Function enabled through keypad only) 
; 4 7      ; [ _ _ _ ] :  
(XXX Hours) 
•Function 45 allows passage through the door without the need for a User Code.  Re-Lock using Function 46.   
•Programmed Schedules will override the state of the lock when Functions 45 and 46 are used.  If it is required that 
programmed...

22 
49. Disable Permanent Passage Mode (This Function enabled through keypad only) 
50. Return Lock to Normal Passage 
Mode Schedule 
(This Function enabled through keypad only) (Locks will lock or unlock depending on the current schedule).  Use Function 50 to undo Functions 48 and/
or 49, and therefore return the lock to all pre-existing scheduled functions. 
•Function 48 allows passage through the door without the need for a User Code.  Re-Lock using Function 49. 
•Programmed Schedules will not...

23 
; 5 5 : 
; 5 7 :  57. Print Clock Settings, Software 
Version and Door Number
  
55. Print Audit Trail  
; 5 6 :  56. Print User Code List  
; 5 8 : 58. Upload/Download PC Data 
Hold the printer over the locks infrared sensor as shown in Figure 1 and Figure 2 above.  
Twenty (20) events will print at a time; press 1 for more events, or 9 to quit.  To abort printing, 
press any key for 3 seconds (three short beeps will sound). 
 
Audit Trail Format Examples 
The Audit Trail data indicates from which...

24 
;62 ; [ _ _ _ _ ]                ; [ _ _ _ _ _ _ ] : 
(User Number)                                    (User Code) 
60. Number of Attempts Before Lockout  
61. Set the Attempts Lockout Time 
LOCKOUT 
; 6 4 :  64. Disable Remote Input 
Remote Input  
; 6 5 : 65. Enable Remote Input 
66. Reserved 
•Number of attempts before lockout must be 1-9 attempts. 
•The number of attempts is reduced by half every time the keypad is locked out without a successful code entry (default is 
6 attempts).   
•The...

25 
 
; 6 7    ; [ _ _ ] : 
        (Event Number) 67. Add System Features 
SYSTEM FEATURES 
68. Delete All Features added by Function 67.   ; 6 8   ; 0 0 0 : 
 4 
•System Options  
24.    One Time Access for Group 3 Users*** 
25.    Disable Sounder 
26.    5 sec. Delayed Entry * 
27.    15 sec. Delayed Entry * 
28.    45 sec. Delayed Entry * 
•Remote Input Functions 
29. Toggle Passage Mode.  Remote Input toggles Passage 
Mode.   
30. Forced Unlock Follows Remote Input.**  When Remote 
Input switch is...

26 
Scheduled Passage and Group 
Use the functions below to enable Passage Mode and enable/disable Groups at the time programmed. 
•For day enter: 1 for Sunday, 2 for Monday, 3 for Tuesday, 4 for Wednesday, 5 for Thursday, 6 for Friday, 7 for Saturday, 8 for Monday to Friday, 9 for Saturday and Sunday, and 0 for all days of week. 
SCHEDULES 
74. Schedule Enable Group 1 ; 7 4      ; [ _ ]           ; [ _ _ _ _ ] : 
                                         (Day)                                (Time) 
75....

27 
QUICK SCHEDULES 
84. Business Quick Schedule 
7AM-5PM, Monday - Friday (This Function enabled through keypad only) 
; 8 4      ; [ _ ] :  
(Group)  
; 8 5      ; [ _ ] :  
(Group)  85. Day Quick Schedule  
7AM-5PM, All days (This Function enabled through keypad only) 
; 8 6      ; [ _ ] :  
(Group)  86. Evening Quick Schedule 
3PM-1AM, All days (This Function enabled through keypad only) 
; 8 7      ; [ _ ] :  
(Group)  87. Night Quick Schedule 
11PM-9AM, All days (This Function enabled through...

28 
; 9 9      ; 0 0 0 :  99. Clear All Lock Programming (This Function enabled through keypad only) 
Clears all programming, and returns lock to factory default settings.  Audit Trail contents 
are maintained.  M 
CLEAR ALL PROGRAMMING 
94 - 98. Reserved 
92. Enable Group 4  
(Open Time Window) 
(This Function enabled through keypad only) 
; 9 2      ; [ _ ]           ; [ _ _ _ _ ] : 
                                       (Day)                                      (Time) 
Functions 92 and 93 allow you...

29 
Groups and Scheduled Group 1 Examples  
The following examples detail the more advanced features of the DL series locks.  Although all features and device functions can be programmed 
using the lock keypad, when programming becomes more complex you may find it easier to use DL-Windows software to program your Alarm Lock 
security lock.  For more information, contact your Alarm Lock security professional. 
 
Assign a User to Two Groups 
Create a User 101 (all Users 101-150 are members of Group 2 by...

30 
Groups and Scheduled Group 1 Examples (contd.) 
Press ; 2 ; 4 ; 4 5 6 7 8 9 :. 
3.    Because User 4 does not have a default Group association, make User 4 a member of Group 1 using Function 35: 
Press ; 3 5 ; 4 ; 1 :. 
4.    Using Function 17, disable Group 4.  (Group 4 will need to be disabled before it can be enabled later). 
Press ; 1 7 :. 
5.    Use Function 92 to set the time to open the window (8:30 A.M. all days of the week) allowing any Group 1 member to enable Group 4.  Use 
Function 93 to...