Alarm Lock DL3500 DL3500EX ETDL DL3200 Programming Instructions User Manual

							1 
Trilogy 
DL3500, DL3500EX, ETDL & DL3200 
Programming Instructions 
 
Alarm Lock Trilogy Series 
Stand-Alone Access Control Systems 
DL3500EX DL3500 
ETDL 
DL-Windows 
 
DL3200 
WI1005C  11/05 
345 Bayview Avenue 
Amityville, New York 11701 
For Sales and Repairs 1-800-ALA-LOCK 
For Technical Service 1-800-645-9440 
 Publicly traded on NASDAQ             Symbol: NSSC © ALARM LOCK 2005 
AL-DTM 
DATA TRANSFER 
MODULE AL-IR1 PRINTER  
						

							2 
Table of Contents 
DL Series Lock Features .................................... 3  
Supported Products ........................................... 4  
Lock Design Overview ....................................... 5  
Terminology Used in this Manual ..................... 6  
Programming Levels .......................................... 8  
Conventions Used in this Manual ..................... 9  
LED and Sounder Indicators ............................. 9 
Product Communication Examples ................. 10  
Wiring and Power Up .......................................... 11 
Quick Start ............................................................ 12 
Testing the Codes Entered ................................ 13 Programming Functions Overview ...................14 
Programming Functions .....................................15-28 
Groups and Scheduled Group 1 Examples .....29 
Programming Record Sheet ...............................31 
User Code Record Sheet ....................................32 
Schedule Record Sheet ......................................33 
Glossary ................................................................34 
Warranty ................................................................36 
THE ALARM LOCK TRILOGY DL-SERIES STAND-ALONE ACCESS CONTROL SYSTEM IS A SERIES OF STATE-OF-
THE-ART MICROPROCESSOR-BASED PROGRAMMABLE KEYPAD-ENTRY SECURITY LOCKS. 
DL3500, DL3500EX, DL3200 & ETDL 
Features a real-time clock/calendar that automatically adjusts for Daylight Sav-
ing Time and allows for automated programming of events.  Features three 
methods of programming:  (1) all features can be programmed manually through 
the keypad; (2) you can transfer programming instructions directly from your lap-
top or desktop PC using DL Windows software and a special AL-PCI cable; and 
(3) data can be transferred from your PC to your DL lock via the AL DTM hand-
held Data Transfer Module.  In addition, data can be retrieved from the lock in 
one of three ways (1) through an infrared printer; (2) directly from the lock to the 
PC; or (3) through an AL-DTM to your PC.   
 
The DL Series locks include several lock types:  a lock for the European market 
(DL3500EX), a mortise-based lock for additional hardware security (DL3500), 
and a mortise-based lock for use with push bar applications (ETDL). 
 
Programming is identical for all locks. 
 
 
 
 
DL SERIES LOCKS 
DL3500EX 
DL3500 
ETDL 
DL3200  
						

							3 
Audit Trail 
•40,000 Event Capacity 
•Entries Logged with Time and Date 
•Critical Programming Events Logged 
•Printable using the AL-IR1 Hand-Held Printer (see page 22, Function 55) 
•Uploadable using Alarm Locks DL-Windows software (see page 22, Function 58) 
•Transferable to AL-DTMs (see page 23, Function 59) 
 
Lock Features 
•Metal Key Override for all cylindrical locks 
•Keypad Lockout (see page 23, Functions 60-61) 
•Non-Volatile (Fixed) Memory 
•Real-Time Clock (within one second accuracy) 
      (see page 20, Functions 43-44) 
•Programmable Relay (see page 27)
 
•Visual and Audible Keypad Feedback (see page 9) 
•Battery Status Monitor (see page 9) 
 
Scheduling 
•500 Scheduled Events (see pages 25-30) 
•Automated Unlock/Lock 
•Enable/Disable Users (see page 16, Function 3) 
•Enable/Disable Groups (see page 17) 
•Four Quick Schedules (contains 4 most common schedules) (see page 26) 
•Real-time clock and calendar (see page 19) 
•Programmable Timeout Functions (see page 18) 
 
User Access Methods 
•Keypad Entered User Codes (see page 15) 
•Metal Key Override  
 
User Features 
•2000 Users (Note:  DL3500 and DL3500EX locks are limited to 300 Users.  See page 15) 
•6 Pre-defined Administration User Levels including Master, Installer, Manager, Supervisor, Print-Only and 
Basic User Codes (see page 8) 
•User Code Lengths from 3-6 digits 
•Service Code (“One-Time-Only” Code) (see page 7) 
•User Lockout Mode (see page 16, Function 6) 
•Users Assignable to 4 Groups (see page 18) 
•Ambush Function (see page 23, Function 66) 
 
Keypad and Computer Programming 
•All programming may be performed manually from the keypad, or from a PC using Alarm Locks DL-
Windows Software (see page 4)
 
DL Series Lock Features  
						

							4 
Double-ended Mini Banana Plug Connector 
After you create the program in DL-W indows and transfer the program from your computer to an AL-DTM, 
transfer the program from the AL-DTM to the lock(s) via a double-ended mini banana plug. 
DB9 to DB9 Serial Cable 
Enroll User Codes into DL-Windows, then transfer this new User Code data from the computer to the AL-
PRE via this 9-pin DB9 to DB9 serial cable.  Once the data is in the AL-PRE, you can transfer the data to 
the lock via the double-ended mini banana plug (see above), thus avoiding the need to use an AL-PCI 
cable for this process. 
AL-PCI Cable 
An ALARM LOCK AL-PCI cable is required to communicate between your computer’s RS-232 serial com-
munications port (COM 1-4) and the AL-DTM or lock.  One end of the AL-PCI cable is designed to be used 
on a 9-pin serial Com Port.  If your computer has a 25-pin Com Port only, a 25-pin to 9-pin adapter must be 
used.  The other end of the AL-PCI cable features a 2-pin banana plug connector which is polarity sensitive-
-the TAB (marked “GND”) side must be plugged into the lock’s black (left) terminal. 
Supported Products 
Data Transfer Module (AL-DTM) 
An AL-D TM can be used to transfer Lock Programs (and other data) between DL-Windows and locks.  When 
computers cannot be transported or when electrical power is not available, the hand-held AL-DTM device acts as 
a go-between--it allows the transfer of lock data from the computer (through the AL-DT M) and to the lock, or in 
reverse (from the lock through the AL-DTM back to the computer).   
Infrared Printer (AL-IR1) 
An AL-IR1 printer is used to print Audit Trails and User Code lists without the need for a PC.  Its infrared 
reader means no cable connection to the lock is needed.  
						

							5 
Lock Design Overview 
Why Use Software inside a Lock? 
With ordinary door locks, the need to make physical copies of metal keys and distributing them can be a huge organizational and finan-
cial task -- and what will you do if someone causes a security breach by losing their key? 
 The answer lies in the advantage of software.  Software (also called firmware) is not hard or fixed like hardware is.  Software is 
soft -- flexible and changeable to your needs.  Software exists inside your Alarm Lock™ series lock, and can be programmed (and re-
programmed again and again) to suit your changing requirements.  No more metal keys to distribute...instead, distribute User Codes -- 
and delete them from the software when needed.  (A User Code is the software equivalent of a metal key--it is a series of numbers the 
User enters into the door lock keypad to unlock the lock). 
 
Preparing to Program your Lock 
The keypad contains 12 buttons, numbers 1 through 9 plus zero, a star button (:) and a special AL button (;).  These 12 
buttons are all you need to program your lock.  In addition to manually programming your lock (using only the keypad), you can also 
program your lock using a computer program called DL-Windows.  DL-Windows is not needed--but it makes programming faster and 
easier.  This guide will show you how to program your lock manually, without DL-Windows.  (For more information about DL-Windows, see 
User Guide OI237). 
 
Programming your lock begins after you unpack it from the box -- there is a specific procedure outlined in Quick Start (page 12) 
in which you wake up the lock to prepare it for programming.  This Quick Start procedure shows you all the steps required to 
get your lock to start working.  To begin programming, you must first enter something called Program Mode.   
 
What is Program Mode? 
With software, changes are made using the keypad.  The software has only two modes--Normal Mode and Program Mode.  
When you want to make changes to the lock programming, you enter Program Mode.  When you finish programming and wish to 
put the lock into use, you exit Program Mode to enter Normal Mode.   
 
Program Mode is entered using the keypad, by pressing the Master Code of the lock.  The Master Code is basically a secret pass-
code that allows you to enter Program Mode.  But since all locks are manufactured identically and leave the factory with the same 
Master Code, the factory Master Code is therefore not very secret--and should be changed to your own personal Master Code.  
This way, only YOU can enter Program Mode and make changes to the lock programming.   
 
Once the new Master Code is set , then you can continue with the Quick Start procedure and set the weekday, date and time.  Af-
ter this, you can start entering User Codes for people to use.  All changes to the lock are organized by their Function Number.  
Want to change the date?  Use Function Number 38.  Want to add a User Code?  Use Function Number 2.  There are 99 Func-
tions in total, some that you will use often, and others that you may never need. 
 
Notice that when you program your lock, programming tends to follow a 
consistent 5-step pattern:  (1) Enter Program Mode   
(2) Press ; followed by the Function #  (3) Press ; and enter data  (4) Press : to end  (5) Exit Program Mode.   
 
Turn the page and learn about the special terminology used with your lock.  Once that is clear, use the Quick Start proce-
dure (on page 12) to help you get up and running.  
 
Infrared LED (for Printer) 
PC / AL-DTM Interface 
Tri-Color Status LED 
Special AL (;) Key 
STAR (:) Key  
						

							6 
Terminology Used in this Manual 
What is a Lock Program? 
A Lock Program contains the instructions that a lock uses to 
perform its various functions.  You can use the keypad to cre-
ate a Lock Program stored within the lock.  You can also use 
DL-Windows (defined below) to create a Lock Program on your 
computer, and then transfer and store the Program in the cir-
cuitry contained inside the lock itself.  The Lock Program is es-
sentially a computer database file that maintains feature set-
tings, schedules, audit trails, etc.  Using DL Windows, Lock 
Programs can be created with default information, edited on 
your PC, and then sent to (and even received from) locks.   
 The Lock Program consists of 4 areas:  User Codes, Fea-
tures, Time Zones, and Schedules, all defined below:   
 
What are User Codes? 
Also called User Access Codes or PIN No. Codes, User Codes 
are numbers the User presses into the lock keypad to unlock 
the lock.  The User Codes are part of the Lock Program, and 
the Lock Program is stored in the lock circuitry awaiting the Us-
ers to key in their User Codes.   
 
What are Features? 
Your lock is designed to support several options and functions.  
Using the keypad or DL-Windows software (the Programma-
ble Features window), you can select the features you wish to 
activate, such as if the lock will automatically adjust for Daylight 
Saving Time in the spring and autumn, or if the lock sounder 
should be disabled or enabled. 
 
What is a TimeZone? 
Events (recorded lock activities) can be programmed to occur 
at certain times.  It is these times (for example, “every Tuesday 
at 5PM”) that are referred to as TimeZones.  TimeZones can be 
created manually through the keypad.  In DL-Windows, you can 
create TimeZones, and link TimeZones to events. 
 
What is a Schedule? 
Your lock can be programmed to maintain a schedule in which 
certain events can occur automatically.  For example, you can 
program the lock to allow Groups of Users (with their User 
Codes) access ONLY during specific business hours.  With an-
other example, you can program another lock to UNLOCK at 
9am, LOCK at noon for lunch, UNLOCK at 1pm, and LOCK 
again at 5pm--every weekday.  As you can see, many different 
combinations of Schedules can be created to suit the needs of 
the Users.  First you create TimeZones (see above), then cre-
ate events and link them to your TimeZones.  When finished, 
you can view your complete schedule in DL-Windows.
 
 
What is a User? 
A User is a person who is authorized to simply use or make 
certain programming changes to the lock.  This User can be 
anyone--from a one-time visitor (who will almost certainly have 
no authority to make changes) to the owner of the building in 
which the lock is installed (who will probably wish to have total 
authority to make changes).  The DL Series locks can hold 
hundreds of Users in its programming memory, and each User 
possesses a pre-defined level of authority--a Programming 
Level--as to their ability to use or make changes to the lock.   
 
What is a Programming Level? 
The Programming Level defines the range of programming tasks a User is allowed to perform.  The higher the Level, the 
more programming tasks the User is allowed (with Master al-
lowing ALL tasks).   
 Note:  Since the Programming Level is closely associated with 
the type of User and their abilities, a User who holds a certain 
Programming Level is sometimes referred to by their “User 
Type”. 
 For example, DL3500 Series locks can hold up to 300 Users in 
its programming memory, and each User is associated with a 
User Number (see definition of User Number below) and 
therefore a specific Programming Level, as follows: 
 Master:  Always associated with User Number 1.  Is always 
enabled and can program all functions.  (Abbreviated as 
Programming Level = M). 
Installer:  Always associated with User Numbers 2 and 3.  Can 
program all functions except changing the Master Code.  
(Abbreviated as Programming Level = 4). 
Manager:  Always associated with User Numbers 4, 5, and 6.  
Can program all functions except functions relating to lock 
configuration.  (Abbreviated as Programming Level = 3). 
Supervisor:  Always associated with User Numbers 7, 8 and 9.  
Can only program functions relating to day to day operation.  
(Abbreviated as Programming Level = 2). 
Print Only Users:  Always associated with User Numbers 10 & 
11.  Restricted to print event logs only.  No other 
programming ability allowed.  (Abbreviated as Programming 
Level = 1). 
Basic Users:  Always associated with User Number 12 and 
higher (except 297-300).  No programming ability allowed.  
Most Users are Basic Users, who are given their own 
personal User Codes and are only allowed to simply unlock 
the lock when desired.   
 
Programming Levels are hierarchical--higher levels are allowed 
to do anything the levels below them can do.  For example, if 
you are a Manager, you are allowed to do anything that Super-
visors, Print-Only Users and Basic Users can do in addition to 
those tasks allowed for Managers (Level 3).  See page 8 for 
more information. 
 
What is the Minimum Required Program Level? 
This Programming Level abbreviation is the minimum program-
ming level required to access the particular Function.  (The 
higher the level number, the more programming tasks the User 
is allowed, with Master allowing all tasks). 
 
In this manual, Programming Levels for the DL series locks are 
abbreviated as follows:  M = Master, 4 = Installer, 3 = Manager, 
2 = Supervisor, 1 = Print Only Users.  See page 8 for more in-
formation. 
 
What is a User Number? 
(User Number = Location Number = User Location = Slot in 
Lock) 
User Numbers are used and are significant within each individ-
ual lock only.  The User Number determines the Programming 
Level for each User.  For example, DL3500 Series locks can 
hold up to 300 Users in its programming memory.  This mem-
ory can be thought of as simply a numbered list from 1 through 
300.  Each entry in the list is represented by a User Number.  
Therefore, where a User is located in this list--their User Loca-
tion--is a commonly used description of their User Number.  
Because of their similarities, a User Number, User Location  
						

							7 
and Location Number can be used interchangeably.  In some 
DL-Windows screens, the word Slot is also used.  They all 
mean the same thing. 
 Since User Numbers are fixed, knowing a User Number will 
specify the associated Programming Level, and will in turn in-
dicate a User’s programming abilities.  For example, User 
Number 1 is always the Master, who can perform all program-
ming tasks. 
 Programming Levels are hierarchical--higher levels are al-
lowed to do anything the levels below them can do.  For exam-
ple, if you are User 2, you are allowed to do anything that Us-
ers 3 through 2000 can do.   
 
What is a Group? 
With many lock applications, it is convenient for large numbers 
of similar Users to be grouped together.  Placing Users into 
Groups (by assigning them specific User Numbers) allows 
large numbers of Users to be controlled all at once rather than 
individually--saving time and effort.  Groups are controlled via 
schedules, and a typical example involves enabling or dis-
abling a Group at a certain time.  Default Group associations 
are specified in the tables on page 8.  For example, if you wish 
to add a User to Group 1, assign this User a User Number be-
tween 51 and 100.  These default Group associations can be 
changed if needed to allow Groups larger than the default 
number of 50 (by using keypad Function 35).  (See page 18 
for some Group function examples). 
 
Who are Users 297-300? 
Users assigned to User Numbers 297, 298, 299 and 300 have 
special abilities, as follows: 
 User 297:  Quick Enable User 300 
User 297 possesses the unique ability to enable the User 
Code associated with User 300.  User 297 does this by first 
entering their own User 297 User Code into the lock keypad.  
When User 300 subsequently enters their User 300 User 
Code, the lock allows access (for one time) and then the 
User 300 User Code becomes disabled. 
 For example, you wish to allow one-time access to a tempo-
rary worker.  Simply enter the User 297 User Code into the 
lock keypad.  Later, when the temporary worker enters the 
User 300 User Code into the lock keypad, the User 300 User 
Code allows access (for one time only) and then becomes disabled.  Later, if you wish to grant the temporary worker re-
access, simply re-enter the User 297 User Code and the 
User 300 User Code will be re-enabled (again for one time 
only).   
 
User 298:  Quick PC Access Code 
Entering the User Code for User 298 enables that User to 
send data to or from the lock.  Therefore, User 298 can acti-
vate what is the equivalent of Function 58 in Program Mode 
(see page 22), without the need to enter Program Mode nor 
the need to know the Master Code of the lock.  An AL-PCI 
cable with a PC is required.  NOTE:  The User Code for User 
298 is not an Access Code. 
 
User 299:  AL-DTM Code 
This is the only User Code that will initiate data transfer with 
the AL-DTM--and without allowing the User to pass through 
the door (the User Code for User 299 is not an Access 
Code).  An AL-PCI cable and an AL-DTM (first programmed 
by the computer via DL-Windows) is required. 
 
User 300:  One-Time Only Service Code 
This is a One-Time Only Service User Code enabled by User 
297.  For example, User Code 300 is sometimes used for 
guard tour duties.  See User 297:  Quick Enable User 300 
above.   
 
What is DL-Windows? 
DL-Windows is a computer program that allows you to pro-
gram your ALARM LOCK T3 Security Lock.  You do not need 
DL-Windows to program your lock, but it makes programming 
much faster and easier.  With DL-Windows, you can quickly 
create Lock Programs (programs that make the lock perform 
its many functions) add multiple Users (who have access), 
retrieve event logs, and create Schedules.  The benefit of DL-
Windows is that it allows you to set up all lock programming in 
advance (on your computer), and then later send the informa-
tion to the locks at your convenience. 
Terminology Used in this Manual (contd)  
						

							8 USER TYPE  USER NUMBER GROUP DEFAULT  
ASSOCIATION MINIMUM PROGRAM 
LEVEL (See page 6) 
Master Code  1  -  M 
Installer Codes  2 & 3  none  4 
Manager Codes  4 - 6  none  3 
Supervisor Codes  7 - 9  none  2 
Print Only Codes  10 - 11  none  1 
Basic User Codes  12 - 50  none  none 
Basic User Codes Group 1  51 - 100  1  none 
Basic User Codes Group 2  101 - 150  2  none 
Basic User Codes Group 3  151 - 200  3  none 
Basic User Codes Group 4  201 - 250  4  none 
Basic User Codes  251 - 296  none  none 
Quick Enable User 300 Code  297  none  none 
Quick PC Access Code  298  none  none 
AL-DTM Code  299  none  none 
Service Code  300  none  none 
Basic User Codes*  301-2000  none  none 
Lock Defaults for DL3500, DL3500EX, DL3200 & ETDL 
Users added will default to a Group Association and a Programming Level as follows:  
User 299 is a Non-Pass Code.  This is the only code that will initiate data transfer with the AL-DTM. 
 
*DL3500 and DL3500EX locks are limited to 300 users. 
 
NOTES:  
The Programming Level defines the range of programming tasks 
a User is allowed to perform.  The higher the Level, the more pro-
gramming tasks the User is allowed (with Master allowing ALL 
tasks).   
 Note:  Since the Programming Level is closely associated with 
the type of User and their abilities, a User who holds a certain 
Programming Level is sometimes referred to by their “User 
Type”. 
 For example, DL Series locks can hold hundreds of Users in its 
programming memory, and each User is associated with a User 
Number (see definition of User Number in the previous 
Terminology section) and therefore a specific Programming 
Level, as follows: 
 Master:  Always associated with User number 1.  Is always en-
abled and can program all functions.  (Abbreviated as 
Programming Level = M). 
Installer:  Always associated with Users 2 and 3.  Can program 
all functions except changing the Master Code.  (Abbreviated as Programming Level = 4). 
Manager:  Always associated with Users 4, 5, and 6.  Can pro-
gram all functions except functions relating to lock 
configuration.  (Abbreviated as Programming Level = 3). 
Supervisor:  Always associated with Users 7, 8 and 9.  Can only 
program functions relating to day to day operation.  
(Abbreviated as Programming Level = 2). 
Print Only Users:  Always associated with Users 10 & 11.  
Restricted to print audit trails only.  No other programming 
ability allowed.  (Abbreviated as Programming Level = 1). 
Basic Users:  Always associated with User number 12 and 
higher (except 297-300).  No programming ability allowed. 
 
Programming Levels are hierarchical--higher levels are allowed to 
do anything the levels below them can do.  For example, if you 
are a Manager, you are allowed to do anything that Supervisors, 
Print-Only Users and Basic Users can do in addition to those 
tasks allowed for Managers (Level 3).   
Programming Levels  
						

							9 
ACTIVITY LED SOUNDER COMMENTS 
Keypress 1 RED Flash 1 Beep Normal Operation 
Access Granted or Remote Release 3 GREEN Flashes 3 Beeps Remote release enabled through activa-
tion of relay 
Invalid Code 6 RED Flashes 6 Beeps Re-enter User Code 
Successful Program Entry 2 GREEN Flashes 2 Beeps When in Program Mode 
Unsuccessful Program Entry 7 RED Flashes 7 Beeps When in Program Mode 
Exit Program Mode 1 Red, 2 Green Flashes 10 Beeps 73 in Continuous Wave (Morse Code) 
Valid but Disabled Code 1 Green, 4 Red Flashes 1 long, 5 short beeps Code exists in memory, but disabled 
Low Battery Yellow Flash during key 
presses Long Beep See page 11 before changing batteries 
User Code Entered Yellow Flash Sequence of 7 Beeps 
Repeated 4 Times  Non-fatal memory or clock error has been 
detected.  Under this condition, 
unexpected operation is possible.  Re-
move power and restart. 
Programming Key Sequence. 
Programming  
Information 
General Program Mode Information 
If a wrong key is pressed during code entry,  hold any key continuously until the error sound is heard (7 short beeps), this will clear the entry.  Re-enter the key 
sequence again.   
All program sequences are followed by the : key; 2 short beeps indicate a successful program sequence. 
Enabling/Disabling Users (By User Number) 
3. Disable User  ; 3      ; [ _ _ _ ] : 
4. Enable User  ; 4      ; [ _ _ _ ] : 
User Number must be between 2 and 2000.  (DL3500 Series locks allow up to 300 Users). 
NOTE:  Will Enable/Disable users even if the user is associated with an enabled group. 
2 
Conventions Used in this Manual 
LED and Sounder Indicators 
The DL Series locks provide visual and audible keypad feedback.  With a fully charged battery, the LED and sounder feedback 
is as follows: 
Minimum Required Program Level  Program Levels are abbreviated as follows:  M = Master 
4 = Installer  
3 = Manager 
2 = Supervisor 
1 = Print Only Users 
 This Program Level abbreviation is the 
minimum program level required to 
access the particular Function.  (The 
higher the level, the more programming 
tasks the User is allowed, with Master 
allowing all tasks). 
Function  
Description 
Function  
Number Function Name  
						

							10 
NOTE:  
The AL-PCI cable is designed to be used on a 9 pin serial COM port.  If your computer has a 25 pin COM port, a 25 pin to 9 pin adapter must be used.   
Warning:  Polarity MUST be observed when connecting cables to the lock.  The tab (-) must plug into the negative (black) hole. 
Scenario 4   Use the AL-IR1 Infrared printer to print your lock’s audit trail (event log), User Code list, clock settings and software 
version.  No cable required. 
Scenario 1   Create the program in DL-Windows on your computer, then transfer the program from the computer directly to the lock via an 
AL-PCI cable.  You must always enter the User 298 User Code to send or receive data Using DL-Windows. 
IBM COMPATABLE  
LAPTOP OR DESKTOP PC 
NOTE:  OBSERVE TAB DIRECTION W HEN 
INSERTING CABLE INTO LOCK 
AL-PCI CABLE 
CONNECT TO SERIAL PORT 
(COM 1-4) 
Scenario 2   Create the program in DL-Windows and transfer the program from your computer to an AL-DTM (via an AL-PCI cable)…then 
transfer the program from the AL-DTM to the lock(s) (via a double-ended mini banana plug).  The hand-held AL-DTM is useful because 
you do not have to transport (or find electricity for) your computer.  Data can also flow in reverse, from the lock, through the AL-DTM, 
back to the computer for examination. 
IBM COMPATABLE  
LAPTOP OR DESKTOP PC 
NOTE:  OBSERVE TAB DIRECTION W HEN 
INSERTING CABLE INTO LOCK 
AL-PCI CABLE 
CONNECT TO SERIAL PORT 
(COM 1-4) 
AL-DTM DATA 
TRANSFER 
MODULE 
NOTE:  OBSERVE TAB DIREC-
TION WHEN INSERTING CABLE 
INTO AL-DTM AND LOCK 
DOUBLE-ENDED MINI BANANA 
PLUG CONNECTOR 
Product Communication Examples 
Send to lock Receive from lock 
DL3200 
DL3200 
DL3200 AL-IR1 PRINTER