Home > Alarm Lock > Alarm Lock > Alarm Lock DL1200Narrow Stile Programming Instructions User Manual

Alarm Lock DL1200Narrow Stile Programming Instructions User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Alarm Lock DL1200Narrow Stile Programming Instructions User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 84 Alarm Lock manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11 
    When the batteries are weak and a key is pressed, the lock will alert you by flashing the RED LED accompanied by a 
    high/low sounder.  The DL1200 uses two 123 Type Lithium batteries (Duracell P/N CR17345).  The lock will function 
    with weak batteries; however be sure to replace them as soon as possible. 
     
    If the DL1200 is ever without power for less than 1 minute (such as when replacing batteries), the DL1200 will con-
    tinue its operation undisturbed--programming remains unaffected due to power provided by capacitors inside the lock.  
    If the DL1200 is without power for greater than one minute, you have two choices--you can (1) retain the lock pro-
    gramming or (2) erase all programming.  If you choose to erase all programming, the DL1200 will revert to its original 
    factory default configuration (out of the box). 
     
    CAUTION:  Do not press any keys while batteries are disconnected unless you intend to erase all programming.    
    1.   Remove the screw at the rear of the lock housing and remove the cover. 
    2.   Remove battery pack and replace both 123 type lithium batteries quickly - within 1 minute. 
    3.   Replace battery pack and cover.  Tighten the cover screw to secure. 
     
    If you accidentally press a key (or fail to replace the batteries within 1 minute), use the Retain Lock Programming 
    procedure below: 
     
    Retain Lock Programming 
    1.   Re-install battery pack. 
    2.  Do not press any keys for 10 seconds. 
     
    If you do not hear any beeps or if you hear 3 beeps (one per second), the previous lock programming is retained 
    and the lock is now ready for use.  If you test the DL1200 and find the lock programming is lost, you may erase all 
    programming and return the DL1200 to its original factory settings, as described below. 
    Battery Replacement 
    Restore Factory Default (original settings that were set at the factory will be loaded). 
    1.  Enter the current Master Code (if not known, proceed directly to Alternative Method, below).   
    2.  Within 5 seconds (or current pass time interval), press 
    ; 000 ;. 
    3.  Listen for 6 beeps.  The lock will re-lock.  Now proceed directly to page 2, Quick Start, and follow the procedure 
    Change the Master Code. 
     
    Alternative Method 
    1.  Remove the lock front cover assembly from the door and disconnect the battery pack.  Locate jumper header JP1 
    and install the jumper (provided) across pins 1 and 2 of JP1. 
    2.  Press and hold any numeric key for 10 seconds (to ensure all power is drained from the lock) and release. 
    3.  Connect the batteries and--within 3 seconds--press and hold 
    ;.  After hearing 6 additional beeps, release ;.   
    4.  Test by pressing the default Master Code of 
    12345 (a beep will sound and the lock will unlock). 
    5.  Remove the jumper from JP1 pins 1 and 2.  Re-assemble lock on the door. 
          Now proceed directly to page 2, Quick Start, and follow the procedure Change the Master Code.   
    •Important:  If you do not hear the 6 beeps in step 3, you must start over at step 1.  Failure to follow this exact pro-
    cedure can result in erratic lock behavior.   
    Erase All  Programming  
    						
    							12 
    ALARM LOCK SYSTEMS, INC. (ALARM LOCK) 
    warrants its products to be free from manufacturing 
    defects in materials and workmanship for 24 months 
    following the date of manufacture. ALARM LOCK will, 
    within said period, at its option, repair or replace any 
    product failing to operate correctly without charge to 
    the original purchaser or user. 
    This warranty shall not apply to any equipment, or 
    any part thereof, which has been repaired by others, 
    improperly installed, improperly used, abused, altered, 
    damaged, subjected to acts of God, or on which any 
    serial numbers have been altered, defaced or 
    removed. Seller will not be responsible for any 
    dismantling or reinstallation charges. 
    THERE ARE NO WARRANTIES, EXPRESS OR 
    IMPLIED, WHICH EXTEND BEYOND THE 
    DESCRIPTION ON THE FACE HEREOF. THERE IS 
    NO EXPRESS OR IMPLIED WARRANTY OF 
    MERCHANTABILITY OR A WARRANTY OF 
    FITNESS FOR A PARTICULAR PURPOSE. 
    ADDITIONALLY, THIS WARRANTY IS IN LIEU OF 
    ALL OTHER OBLIGATIONS OR LIABILITIES ON 
    THE PART OF ALARM LOCK. 
    Any action for breach of warranty, including but not 
    limited to any implied warranty of merchantability, must 
    be brought within the six months following the end of 
    the warranty period. IN NO CASE SHALL ALARM 
    LOCK BE LIABLE TO ANYONE FOR ANY 
    CONSEQUENTIAL OR INCIDENTAL DAMAGES 
    FOR BREACH OF THIS OR ANY OTHER 
    WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE 
    LOSS OR DAMAGE IS CAUSED BY THE SELLERS 
    OWN NEGLIGENCE OR FAULT. 
    In case of defect, contact the security professional 
    who installed and maintains your security system. In 
    order to exercise the warranty, the product must be 
    returned by the security professional, shipping costs 
    prepaid and insured to ALARM LOCK. After repair or 
    replacement, ALARM LOCK assumes the cost of 
    returning products under warranty. ALARM LOCK 
    shall have no obligation under this warranty, or 
    otherwise, if the product has been repaired by others, 
    improperly installed, improperly used, abused, altered, 
    damaged, subjected to accident, nuisance, flood, fire 
    or acts of God, or on which any serial numbers have 
    been altered, defaced or removed. ALARM LOCK will 
    not be responsible for any dismantling, reassembly or 
    reinstallation charges. 
    This warranty contains the entire warranty. It is the 
    sole warranty and any prior agreements or 
    representations, whether oral or written, are either 
    merged herein or are expressly cancelled. ALARM 
    LOCK neither assumes, nor authorizes any other person purporting to act on its behalf to modify, to 
    change, or to assume for it, any other warranty or 
    liability concerning its products. 
    In no event shall ALARM LOCK be liable for an 
    amount in excess of ALARM LOCKs original selling 
    price of the product, for any loss or damage, whether 
    direct, indirect, incidental, consequential, or otherwise 
    arising out of any failure of the product. Sellers 
    warranty, as hereinabove set forth, shall not be 
    enlarged, diminished or affected by and no obligation 
    or liability shall arise or grow out of Sellers rendering 
    of technical advice or service in connection with 
    Buyers order of the goods furnished hereunder. 
    ALARM LOCK RECOMMENDS THAT THE ENTIRE 
    SYSTEM BE COMPLETELY TESTED W EEKLY. 
    Warning: Despite frequent testing, and due to, but 
    not limited to, any or all of the following; criminal 
    tampering, electrical or communications disruption, it is 
    possible for the system to fail to perform as expected. 
    ALARM LOCK does not represent that the product/
    system may not be compromised or circumvented; or 
    that the product or system will prevent any personal 
    injury or property loss by burglary, robbery, fire or 
    otherwise; nor that the product or system will in all 
    cases provide adequate warning or protection. A 
    properly installed and maintained alarm may only 
    reduce risk of burglary, robbery, fire or otherwise but it 
    is not insurance or a guarantee that these events will 
    not occur. CONSEQUENTLY, SELLER SHALL HAVE 
    NO LIABILITY FOR ANY PERSONAL INJURY, 
    PROPERTY DAMAGE, OR OTHER LOSS BASED 
    ON A CLAIM THE PRODUCT FAILED TO GIVE 
    WARNING. Therefore, the installer should in turn 
    advise the consumer to take any and all precautions 
    for his or her safety including, but not limited to, fleeing 
    the premises and calling police or fire department, in 
    order to mitigate the possibilities of harm and/or 
    damage. 
    ALARM LOCK is not an insurer of either the property 
    or safety of the users family or employees, and limits 
    its liability for any loss or damage including incidental 
    or consequential damages to ALARM LOCKs original 
    selling price of the product regardless of the cause of 
    such loss or damage. 
    Some states do not allow limitations on how long an 
    implied warranty lasts or do not allow the exclusion or 
    limitation of incidental or consequential damages, or 
    differentiate in their treatment of limitations of liability 
    for ordinary or gross negligence, so the above 
    limitations or exclusions may not apply to you. This 
    Warranty gives you specific legal rights and you may 
    also have other rights which vary from state to state. 
    Alarm Lock Limited Warranty  
    						
    All Alarm Lock manuals Comments (0)

    Related Manuals for Alarm Lock DL1200Narrow Stile Programming Instructions User Manual