Home > Alarm Lock > Alarm Lock > Alarm Lock Digital Lock Interface ALPCI2U PC INSTALLATION INSTRUCTIONS

Alarm Lock Digital Lock Interface ALPCI2U PC INSTALLATION INSTRUCTIONS

    Download as PDF Print this page Share this page

    Have a look at the manual Alarm Lock Digital Lock Interface ALPCI2U PC INSTALLATION INSTRUCTIONS online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 84 Alarm Lock manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							ALPCI2-U 
     
    PC to Digital Lock Interface 
     
    INSTALLATION  INSTRUCTIONS 
    GENERAL DESCRIPTION 
    The ALPCI2-U is an interface cable that allows high speed 
    communication between a PC running DL-Windows software 
    and a compatible Trilogy Digital Lock, Data Transfer Module, 
    or an AL-PRE proximity card reader.  Using the ALPCI2-U, 
    the PC can upload or download programming to/from the 
    lock, and upload event history.  
      
     
    Compatible Trilogy Digital Locks:  
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    SPECIFICATIONS 
    Input Power:  Supplied by the PC and lock connections 
    Dimensions:  2 
    5/8L x 1¼H x ¾W with 5 cord  
    SYSTEM REQUIREMENTS 
    •IBM PC or compatible desktop or notebook computer with 
    233 MHz or faster processor.  
    •At least 10 Mb available on hard drive 
    •At least 64 MB of RAM memory 
    •Microsoft Windows 95, 98, NT4.0 or higher  
    •DL-Windows 
    •One unused RS-232 Serial Communications port (Com 1–
    4), or USB Port (see NOTE 1). 
     
    OPERATION 
    For details regarding the use of the ALPCI2-U, refer to DL-
    Windows User Guide OI237. 
    NOTE 2:  
    The ALPCI2-U is designed to be used on a 9 pin serial 
    Com Port.  If your computer has a 25 pin Com Port, a 
    25 pin to 9 pin adapter must be used.  Warning: 
    Polarity MUST be observed when connecting to the 
    lock.  The tab (–) must plug into the left hole (black).  
    Trilogy® is a registered trademark of Alarm Lock.                                                                                                                                    Windows is a trademark of Microsoft  
    NOTE 1:  
    The ALPCI2-U is fully RS-232 compliant and will function prop-
    erly with a computer that has an RS-232 compliant serial Com 
    Port.  However, many new notebook computers do not provide 
    the proper RS-232 compatible Com Port voltage levels re-
    quired by the ALPCI2-U.  In these cases, the ALPCI2-U may 
    not function properly.  
     
    To test a serial Com Port for ALPCI2-U compatibility, attach the 
    ALPCI2-U to the Com Port and run the DL-Windows loop-back 
    test.  If the loop-back test fails, the Com Port is most likely not 
    RS-232 complaint.  
     
    For new computers with non-RS232 compliant Com Ports, it is 
    recommended that the ALPCI2-U be connected to the com-
    puter’s USB port using the supplied USB converter (MX1130) 
    from Alarm Lock Systems. The MX1130 has been fully tested 
    by Alarm Lock for use with the ALPCI2-U.   
     
    For more information, go to the Alarm Lock website at: 
    www.alarmlock.com
     or contact your distributor. 
    Application 1   Program the Lock directly using a PC or 
    Laptop 
    AL PC I2-U  
    Application 2   Send Trilogy Lock Programs from PC to 
    AL-DTM for transfer to multiple Digital Locks OR use 
    the AL-DTM to retrieve system activity reports from 
    locks to be transferred to the PC. 
    AL PC I2- U  
    Application 3  Connect the AL-PRE Prox Card Enroller 
    to the PC to read Prox Cards directly into DL-
    Windows. 
    AL PC I2-U  
    345 Bayview Avenue 
    Amityville, New York 11701 
    For Sales and Repairs 1-800-ALA-LOCK 
    For Technical Service 1-800-645-9440 
     Publicly traded on NASDAQ             Symbol: NSSC 
    © ALARM LOCK 2005 
    CONNECTION 
    Refer to the following wiring diagrams / applications: 
    WI1478  11/05 
    •DL3000 •DL2800 •PDL4100 •DK3000 
    •DL3500 •DL4100 •DL4500  
    •PDL3000 •PDL3500 •PDL4500  
    •ETDL •ETPDL •PDK3000  
     
      
    						
    							ALARM LOCK SECURITY SYSTEMS, INC. 
    (ALARM LOCK) warrants its products to be free from 
    manufacturing defects in materials and workmanship 
    for 24 months following the date of manufacture. 
    ALARM LOCK will, within said period, at its option, 
    repair or replace any product failing to operate correctly 
    without charge to the original purchaser or user. 
     
    This warranty shall not apply to any equipment, or 
    any part thereof, which has been repaired by others, 
    improperly installed, improperly used, abused, altered, 
    damaged, subjected to acts of God, or on which any 
    serial numbers have been altered, defaced or removed. 
    Seller will not be responsible for any dismantling or 
    reinstallation charges. 
     
    THERE ARE NO WARRANTIES, EXPRESS OR 
    IMPLIED, WHICH EXTEND BEYOND THE 
    DESCRIPTION ON THE FACE HEREOF. THERE IS 
    NO EXPRESS OR IMPLIED W ARRANTY OF 
    MERCHANTABILITY OR A WARRANTY OF FITNESS 
    FOR A PARTICULAR PURPOSE. ADDITIONALLY, 
    THIS WARRANTY IS IN LIEU OF ALL OTHER 
    OBLIGATIONS OR LIABILITIES ON THE PART OF 
    ALARM LOCK. 
     
    Any action for breach of warranty, including but not 
    limited to any implied warranty of merchantability, must 
    be brought within the six months following the end of 
    the warranty period.  
     
    IN NO CASE SHALL ALARM LOCK BE LIABLE TO 
    ANYONE FOR ANY CONSEQUENTIAL OR 
    INCIDENTAL DAMAGES FOR BREACH OF THIS OR 
    ANY OTHER WARRANTY, EXPRESS OR IMPLIED, 
    EVEN IF THE LOSS OR DAMAGE IS CAUSED BY 
    THE SELLERS OWN NEGLIGENCE OR FAULT. 
     
    In case of defect, contact the security professional 
    who installed and maintains your security system. In 
    order to exercise the warranty, the product must be 
    returned by the security professional, shipping costs 
    prepaid and insured to ALARM LOCK. After repair or 
    replacement, ALARM LOCK assumes the cost of 
    returning products under warranty. ALARM LOCK shall 
    have no obligation under this warranty, or otherwise, if 
    the product has been repaired by others, improperly 
    installed, improperly used, abused, altered, damaged, 
    subjected to accident, nuisance, flood, fire or acts of 
    God, or on which any serial numbers have been 
    altered, defaced or removed. ALARM LOCK will not be 
    responsible for any dismantling, reassembly or 
    reinstallation charges. 
     
    This warranty contains the entire warranty. It is the 
    sole warranty and any prior agreements or 
    representations, whether oral or written, are either 
    merged herein or are expressly canceled. ALARM LOCK neither assumes, nor authorizes any other 
    person purporting to act on its behalf to modify, to 
    change, or to assume for it, any other warranty or 
    liability concerning its products. 
     
    In no event shall ALARM LOCK be liable for an 
    amount in excess of ALARM LOCKs original selling 
    price of the product, for any loss or damage, whether 
    direct, indirect, incidental, consequential, or otherwise 
    arising out of any failure of the product. Sellers 
    warranty, as hereinabove set forth, shall not be 
    enlarged, diminished or affected by and no obligation or 
    liability shall arise or grow out of Sellers rendering of 
    technical advice or service in connection with Buyers 
    order of the goods furnished hereunder. 
     
    ALARM LOCK RECOMMENDS THAT THE ENTIRE 
    SYSTEM BE COMPLETELY TESTED WEEKLY. 
     
    Warning: Despite frequent testing, and due to, but 
    not limited to, any or all of the following; criminal 
    tampering, electrical or communications disruption, it is 
    possible for the system to fail to perform as expected. 
    ALARM LOCK does not represent that the product/
    system may not be compromised or circumvented; or 
    that the product or system will prevent any personal 
    injury or property loss by burglary, robbery, fire or 
    otherwise; nor that the product or system will in all 
    cases provide adequate warning or protection. A 
    properly installed and maintained alarm may only 
    reduce risk of burglary, robbery, fire or otherwise but it 
    is not insurance or a guarantee that these events will 
    not occur. CONSEQUENTLY, SELLER SHALL HAVE 
    NO LIABILITY FOR ANY PERSONAL INJURY, 
    PROPERTY DAMAGE, OR OTHER LOSS BASED ON 
    A CLAIM THE PRODUCT FAILED TO GIVE 
    WARNING. Therefore, the installer should in turn 
    advise the consumer to take any and all precautions for 
    his or her safety including, but not limited to, fleeing the 
    premises and calling police or fire department, in order 
    to mitigate the possibilities of harm and/or damage. 
     
    ALARM LOCK is not an insurer of either the property 
    or safety of the users family or employees, and limits 
    its liability for any loss or damage including incidental or 
    consequential damages to ALARM LOCKs original 
    selling price of the product regardless of the cause of 
    such loss or damage. 
     
    Some states do not allow limitations on how long an 
    implied warranty lasts or do not allow the exclusion or 
    limitation of incidental or consequential damages, or 
    differentiate in their treatment of limitations of liability 
    for ordinary or gross negligence, so the above 
    limitations or exclusions may not apply to you. This 
    Warranty gives you specific legal rights and you may 
    also have other rights which vary from state to state. 
    ALARM LOCK LIMITED WARRANTY  
    						
    All Alarm Lock manuals Comments (0)

    Related Manuals for Alarm Lock Digital Lock Interface ALPCI2U PC INSTALLATION INSTRUCTIONS