Akai Dv R4410ss Operators Manual

E - 10
DISPLAY
Region (Local) Number Error Indicator
If the region (local) number of the disc that you attempt to play differs from the region number of the Unit. Invalid Region
appears on the TV screen. (The disc cannot be played).
If no disc is loaded
when the Main Unit
is switched on.
Tray open
Tray closed
Loading
Stopped
Playing
Paused
Fast forward
Fast reverse
Slow
Repeat A - BRemarks
 appears when the tray is closed and:
1)There is no disc in the tray.
2)The disc type is not playable in this Unit....

E - 11
SETUP
(continued to next page) (continued to next page)(continued to next page) (continued to next page)
(continued to next page)
FM
Connect FM antenna (included) to the FM
ANTENNA jacks.
AM(MW)
Connect the loop antenna (included) to
the AM(MW) LOOP ANTENNA terminals.
For better reception
A.Connecting your TV
The unit can be connected to your TV in
several different ways, depending on the
design of your TV.
SCART cable
Use the SCART cable (not supplied),
connect the SCART cable from the unit to...

E - 12
SETUP
(continued to next page) (continued to next page)(continued to next page) (continued to next page)
(continued to next page)
Analogue connection
Using the Audio cable (not supplied),
connect the left/right AUDIO OUT jack
on your Unit to the AUDIO IN jack.
Digital connection
Using the Coaxial Digital Audio cable
(not supplied), connect the DIGITAL
AUDIO OUT on your Unit to the
DIGITAL AUDIO IN jack on your another
equipment.
Listening to another audio
equipment
1. Turn on the Unit.
2. Turn on...

E - 13
SETUP
C. Connecting a VCR
1. Using the supplied 3 Phono/scar t cable, connect the yellow plug from VIDEO OUT jack on your Unit  to VIDEO IN jack on your TV,
connect the left and right AUDIO OUT jacks on your Unit to AUDIO IN jacks on your TV. If you want the sound come from the
speakers of the Main Unit, you need not to connect these left and right Audio cable from the Main Unit to your TV.
2. Using the Video cable (not supplied), connect the VIDEO IN (VCR) jack on your Unit to VIDEO OUT jack on...

E - 14
SETUP
D. Connecting the speakers & subwoofer
The speaker cords have been color-coded to simplify connection. Just plug the POSITIVE (+) and NEGATIVE (-)
ends of each speaker wire into the corresponding jacks on the rear of the Unit, matching the color tube on the end
of the speaker wire to the color-coded connector.
FRONT (RIGHT)REAR (RIGHT) REAR (LEFT) FRONT (LEFT)CENTER
CONNECTING SPEAKERS OTHER THAN THE SPEAKERS
SUPPLIED WITH THE UNIT, MAY DAMAGE THE UNIT.IMP. 8 ohmSUBWOOFER SPEAKER :IMP. 4...

E - 15
E. Positioning the speakers and subwoofer
SETUP
CENTER
Place on the top of or 
below the TV.
REAR SPEAKERS
Place right beside or slightly 
behind your listening position, 
and a little higher than your ears.
SUBWOOFER
Can be placed anywhere.
FRONT SPEAKERS
Place on both sides of the TV, 
equal distances apart.
 

E - 16
SETUP
Turning on the Unit and TV
1)Press the STANDBY/ON button to turn the Unit ON, or
2)Press the STANDBY
/ON button on the remote control or the FUNCTION button or the  PLAY button to turn on
the Unit while the Unit is in standby mode.
3)Turn on the TV by pressing its POWER button.
4)Select the channel on your TV corresponding to the VIDEO IN jack that the Unit is connected to. See TV User
guide for more information.
 If you have connected the Unit successfully, the DVD logo (start-up picture)...

E - 17
ADJUSTING THE  SOUND
(continued to next page) (continued to next page)(continued to next page) (continued to next page)
(continued to next page)
To adjust the surround sound balance while Dolby Digital and Pro Logic II decoding is in effect
Use the remote control to make the following changes to speaker balance:
Front speaker (left)
 Press the SOUND button repeatedly to display 
, then press the  or  CURSOR button to adjust
the sound level. It will show on the display of the Unit.
Front speaker...

E - 18
ADJUSTING  THE SOUND
To select the listening channel
1. When the disc is stopped, you can press the 5.1/2.1 CH button on the remote control to select different speakers
output status shown on below table.
2. At AV IN function mode, you also can press the 
 PRO LOGIC II button repeatedly on the remote control to select
 PRO LOGIC II (indicator on the front panel of display will illuminate).
3. You can active or off subwoofer output by setup menu.
Notes:
 The wording 2.1 CH will be corresponded to...

E - 19(continued on next page) (continued on next page)(continued on next page) (continued on next page)
(continued on next page)
Playing a Disc
This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs are
produced in a manner that allows specific or limited operation during playback. As such, the
DVD Unit may not respond to all operating commands. This is not a defect in the DVD Unit. Refer
to the instruction notes of discs.
“ 
 ” may appear on the TV screen during operation....