Air Live Router WLA-5200AP User Manual

 
Virtual Server 
 Define virtual server ip address and port range, Protocol 
and check the box to enable virtual server, 
The Virtual server which using single port number can be 
accelerated by hardware at wirespeed 
Special 
Application 
 You can define special application that can allow outside users to 
access your internal application behi nd this AP, like QuickTime ,MSN 
gaming zone… 
DMZ 
 DMZ settings will not be worked until WAN have connected...

 
Remote 
Mangement 
 You can enable the Remote management function and define 
the port number let can be managed from internet . 
 
 
WISP + Universal Repeater Mode Setting 
 
 
 
 
                                                                       37                                        WLA-5200AP v2 User’s Manual  

 
                                                                       38                                        WLA-5200AP v2 User’s Manual 
Alias Name You can set the alias name for this device (not exceeding 32 
characters). 
… Disable 
Wireless 
LAN 
Interface Check the box to disable the Wireless LAN Interface, by so doing, 
you won’t be able to make wireless connection with this Access 
Point in the network you are located.  In other words, this device will 
not be visible by any wireless...

 
Site Survey 
 Click site survey setup button that will shows the WISP Outdoor AP 
list and you can select  which WISP AP you want to connect . 
Please refer the AP mode settings Æ Security for details, 
This setting used Wireless client or remote AP to link this device. 
Security 
Please refer the AP mode settings Æ Advance Setting for details. Advance 
Setting  
                                                                       39                                         WLA-5200AP v2 User’s...

 
Special 
Application 
 You can define special application that can allow outside users to 
access your internal application behind this AP, like 
QuickTime ,MSN gaming zone… 
DMZ 
                                                                       40                                        WLA-5200AP v2 User’s Manual 
 DMZ settings will not be worked until WAN have connected 
Remote 
Mangement 
  
You can enable the Remote management function and define the 
port  
number let can be managed from...

 
TCP/IP 
Basic 
In this page, you can change the TCP/IP settings of this Access Point, select to 
enable/disable the DHCP Client, 802.1d S panning Tree, and Clone MAC Address.  
  
This field can be modified only when DHCP Client is 
disabled. If your system manager assigned you static 
IP settings, then you will have to enter the information 
provided. IP Address  
Enter the information provided by your system 
manager. Subnet Mask 
Enter the information provided by your system 
manager.  Default...

 
Press to save the new settings on the screen.   Apply Changes 
Press to discard the data you have entered since last 
time you press Apply Change.  Reset 
  
 
Other 
Upgrade Firmware 
 
1.  Download the latest firmware from your distributor and save the file on the hard drive. 
2.  Start the browser, open the  configuration page, click on Other, and click 
Upgrade Firmware to enter the  Upgrade Firmware window. Enter the 
new firmware’s path and file name (i.e. C:\FIRMWARE\firmware.bin). Or, 
click...

 
 
This function enables users to save the current configurations as a file (i.e. 
config.bin) To load configuration from a f ile, enter the file name or click 
Browse…  to find the file from your computer.anc click update button . 
 
 
 
Factory Default : Click to restore the default configuration. 
 
System Restart  Click to restart the device.  
 
Region Settings 
 You can select your country region  :  Europe, America, South America 
 
Note !!  Select the Country Region will affe ct the each...

 
   
Set your new User name. User name can be up to 
15 characters long. User name can contain letter, 
number and space. It is case sensitive. User Name 
Set your new password. Password can be up to 15 
characters long. Password can contain letter, 
number and space. It is case sensitive. Password 
Re-enter the new password for confirmation.  Confirm Password  
Press to save the new settings on the screen.   Apply 
System Log 
This page display log events with time when events happened, log events’...