Air Live Router WLA-5200AP User Manual

 
                                                                       16                                        WLA-5200AP v2 User’s Manual 
in the network you are located. In other words, 
this device will not be visible by any wireless 
station. 
Band Choose a mode from the pull-down list. 
•  11b/g mixed: Select to allow both 
wireless-b and wireless-g devices on 
the network. 
•  11B only: Select to allow only wireless-
B devices on the network. 
•  11G only: Select to allow only wireless-
G...

 
 
Client Mode Settings 
 
 
The distinguishing name of this device, you may 
change the default alias name by entering a new 
one in this column. Alias Name 
…  Disable Wireless LAN 
Interface  Check the box to disable the Wireless LAN 
Interface, by so doing, you won’t be able to 
make wireless connection with this Access Point 
in the network you are located. In other words, 
this device will not be visible by any wireless 
station. 
Band...

 
                                                                       18                                        WLA-5200AP v2 User’s Manual 
network. 
Network Type You can choose the Ad-Hoc mode and 
Infrastructure mode  
SSID The SSID differentiates one WLAN from another; 
therefore, all access points and all devices 
attempting to connect to a specific WLAN must 
use the same SSID. It is case-sensitive and 
must not exceed 32 characters.  A device will not 
be permitted to join the BSS unless it...

 
  
 
Fragmentation mechanism is used for improving the 
efficiency when high traffic flows along in the 
wireless network. If your 802.11g Wireless LAN PC 
Card often transmit large files in wireless network, 
you can enter new Fragment Threshold value to split 
the packet.  The value can be set from 256 to 2346. 
The default value is 2346. Fragment Threshold 
RTS Threshold is a mechanism implemented to 
prevent the “ Hidden Node” problem. “Hidden Node” is 
a situation in which two stations are within...

 
                                                                       20                                        WLA-5200AP v2 User’s Manual 
Point, informing that it is going to transmit the data. 
Upon receipt, the Access Point will respond with a CTS 
message to all station within its range to notify all other 
stations to defer transmissi on. It will also confirm the 
requestor station that the Access Point has reserved it 
for the time-frame of the requested transmission. 
If the “Hidden Node”...

 
Enable Watch Dog
Watch Interval 
Watch Host 
Check the box to enable this watch dog function 
and set the Watch dog time Interval (1~60 mins) 
and type the ip address of the host ip  
 
Press to save the new settings on the screen.   Apply Change 
Press to discard the data you have entered since last 
time you press Apply Change.  Reset 
 
Security (AP/Client/WISP Mode) 
Here you can configure the security of your wireless network. Selecting different 
method will enable you to have different level of...

 
  
Authentication Type: WPA-PSK/WPA2-PSK  
If WPA-PSK/WPA2-PSK  is selected, users will have  to select the Encryption from 
the pull-down list,  TKIP, AES or TKIP_AES and then enter a passphrase.  
  
 
 
 
 
 
 
 
 
 
 
 
 
 
                                                                       22                                         WLA-5200AP v2 User’s Manual  

 
Bridge Mode Setting  
  
The distinguishing name of this device, you may 
change the default alias name by entering a new 
one in this column. Alias Name 
… Disable Wireless LAN 
Interface  Check the box to disable the Wireless LAN 
Interface, by so doing, you won’t be able to 
make wireless connection with this Access Point 
in the network you are located. In other words, 
this device will not be visible by any wireless 
station. 
Band Choose a mode from the pull-down list. 
•  11b/g mixed: Select to...

 
Allow user to set the channel manually or 
automatically . 
If set channel manually, just select the channel 
you want to specify. 
If “Auto” is selected, user can set the channel 
range to have Wireless Access Point 
automatically survey and choose the channel 
with best situation for communication. 
The number of channels supported depends on 
the region of this Access Point. All stations 
communicating with the Access Point must use 
the same channel. 
Channel Number 
 Advanced Setting 
 
Advanced...

 
                                                                       25                                        WLA-5200AP v2 User’s Manual 
wireless network. If your 802.11g Wireless LAN PC 
Card often transmit large files in wireless network, 
you can enter new Fragment Threshold value to split 
the packet.  The value can be set from 256 to 2346. 
The default value is 2346. 
RTS Threshold RTS Threshold is a mechanism implemented to 
prevent the “ Hidden Node” problem. “Hidden Node” is 
a situation...