Air Live Router WL-5460AP User Manual

¾ WAN Port: WL-5460AP provides 4 methods for client to access the internet. This 
depends on the location and the service which the ISP provides. You need to contact 
the ISP for detail information. 
 
 
¾ Virtual Server: You can use Virtual Server Settings to provide connection on internet. 
For example, you can have your own web server at home and provide access on 
internet. This will need port 80 by default for Virtual Server Settings. 
  

¾ Special Application: This is to enable internet service such as sound, video and so on. 
The routing firewall often stops these services for security reason. 
¾ DMZ: You can use DMZ Settings to provide connection on internet. For example, you 
can have your own web server at home and provide access on internet. This will need 
port 80 by default for Virtual Server Settings. 
¾ Remote Management: This is to configure WL-5460AP be managed from internet. 
Note that port 80 is always used by web service....

3.7 WISP + Universal Mode Settings 
 
 
¾ Alias Name: Another name for WL-5460AP. 
¾ Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, 
by so doing, you won’t be able to make wireless connection with this Access Point in 
the network you are located. In other words, this device will not be visible by any 
wireless station.   
¾ Band: You can choose one mode of the following you need.    
~    2.4GHz (B): 802.11b supported rate only. 
~    2.4GHz (G): 802.11g supported...

referred to as a network name because essentially it is a name that identifies a 
wireless network. 
In this mode, the SSID is the remote WISP CPE to connect to. 
¾ Site Survey: Site survey helps to find out available access point around. You can also 
check to prevent using same SSID or channel with other AP. 
 
¾ SSID of Extended Interface: This field is the SSID of remote Access Point to connect 
to. 
¾ WAN Port: Allow user to set the channel manually or automatically. If set channel 
manually, just...

  
¾ Virtual Server: You can use Virtual Server Settings to provide connection on internet. 
For example, you can have your own web server at home and provide access on 
internet. This will need port 80 by default for Virtual Server Settings. 
 
¾ Special Application: This is to enable internet service such as sound, video and so on. 
The routing firewall often stops these services for security reason.  

¾ DMZ: You can use DMZ Settings to provide connection on internet. For example, you 
can have your own web server at home and provide access on internet. This will need 
port 80 by default for Virtual Server Settings. 
¾ Remote Management: This is to configure WL-5460AP be managed from internet. 
Note that port 80 is always used by web service. You can change the port to prevent 
conflict. 
 
 
 
To configure the security connection, please refer to Section 3.9 Wireless Security 
Settings …… 
To...

3.8 Gateway Mode (AP + Router) Settings 
Important Notice: When change to Gateway mode, the LAN 2 becomes to 
WAN port. 
 
 
 
¾ Alias Name: Another name for WL-5460AP. 
¾ Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, 
by so doing, you won’t be able to make wireless connection with this Access Point in 
the network you are located. In other words, this device will not be visible by any 
wireless station.   
AP Mode Settings 
Router Settings  

¾ Band: You can choose one mode of the following you need.    
~    2.4GHz (B): 802.11b supported rate only. 
~    2.4GHz (G): 802.11g supported rate only.   
~    2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate. 
The default is 2.4GHz (B+G) mode. 
¾ Site Survey: Site survey helps to find out available access point around. You can also 
check to prevent using same SSID or channel with other AP. 
 
¾ SSID (Network ID): The SSID differentiates one WLAN from another; therefore, all 
access...

  
¾ Virtual Server: You can use Virtual Server Settings to provide connection on internet. 
For example, you can have your own web server at home and provide access on 
internet. This will need port 80 by default for Virtual Server Settings. 
 
¾ Special Application: This is to enable internet service such as sound, video and so on. 
The routing firewall often stops these services for security reason.  

¾ DMZ: You can use DMZ Settings to provide connection on internet. For example, you 
can have your own web server at home and provide access on internet. This will need 
port 80 by default for Virtual Server Settings. 
¾ Remote Management: This is to configure WL-5460AP be managed from internet. 
Note that port 80 is always used by web service. You can change the port to prevent 
conflict. 
¾ Dynamic DNS: Dynamic DNS (DDNS) allows you to create a hostname that points to 
your dynamic IP or static IP...