Air Live Router WL-5460AP User Manual

3.2 Client Mode Settings 
 
 
¾ Alias Name: Another name for WL-5460AP. 
¾ Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, 
by so doing, you won’t be able to make wireless connection with this Access Point in 
the network you are located. In other words, this device will not be visible by any 
wireless station.   
¾ Band: You can choose one mode of the following you need.    
~    2.4GHz (B): 802.11b supported rate only. 
~    2.4GHz (G): 802.11g supported rate only....

¾ Channel Number: Allow user to set the channel manually or automatically. If set 
channel manually, just select the channel you want to specify. If “Auto” is selected, 
user can set the channel range to have Wireless Access Point automatically survey 
and choose the channel with best situation for communication. The number of 
channels supported depends on the region of this Access Point. All stations 
communicating with the Access Point must use the same channel.  
¾ Auto Mac Clone (Single Ethernet...

3.3 Bridge Mode Settings 
 
 
¾ Alias Name: Another name for WL-5460AP. 
¾ Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, 
by so doing, you won’t be able to make wireless connection with this Access Point in 
the network you are located. In other words, this device will not be visible by any 
wireless station.   
¾ Band: You can choose one mode of the following you need.    
~    2.4GHz (B): 802.11b supported rate only. 
~    2.4GHz (G): 802.11g supported rate only....

and choose the channel with best situation for communication. The number of 
channels supported depends on the region of this Access Point. All stations 
communicating with the Access Point must use the same channel.  
¾ 802.1d Spanning Tree: Spanning tree is to prevent bridge loop when there are 
multiple active paths between network nodes. Bridge loop could cause connection fail 
or broadcast storm. Spanning tree allows a network design to include spare (redundant) 
links to provide automatic backup...

3.4 WDS Repeater Mode Settings 
 
 
¾ Alias Name: Another name for WL-5460AP. 
¾ Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, 
by so doing, you won’t be able to make wireless connection with this Access Point in 
the network you are located. In other words, this device will not be visible by any 
wireless station.   
¾ Band: You can choose one mode of the following you need.    
~    2.4GHz (B): 802.11b supported rate only. 
~    2.4GHz (G): 802.11g supported rate...

The default is 2.4GHz (B+G) mode. 
¾ SSID (Network ID): Provide SSID for wireless client survey and connection. The SSID 
differentiates one WLAN from another; therefore, all access points and all devices 
attempting to connect to a specific WLAN must use the same SSID. It is 
case-sensitive and must not exceed 32 characters. A device will not be permitted to 
join the BSS unless it can provide the unique SSID. An SSID is also referred to as a 
network name because essentially it is a name that...

To configure the access control, please refer to Section 3.11 Access Control 
Settings …… 
To configure the Traffic Control, please refer to Section 3.12 Access Control 
Settings …… 
 
 
 
 
 
 
  

3.5 Universal Repeater Mode Settings 
 
 
¾ Alias Name: Another name for WL-5460AP. 
¾ Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, 
by so doing, you won’t be able to make wireless connection with this Access Point in 
the network you are located. In other words, this device will not be visible by any 
wireless station.   
¾ Band: You can choose one mode of the following you need.    
~    2.4GHz (B): 802.11b supported rate only. 
~    2.4GHz (G): 802.11g supported...

¾ Channel Number: Allow user to set the channel manually or automatically. If set 
channel manually, just select the channel you want to specify. If “Auto” is selected, 
user can set the channel range to have Wireless Access Point automatically survey 
and choose the channel with best situation for communication. The number of 
channels supported depends on the region of this Access Point. All stations 
communicating with the Access Point must use the same channel. 
¾ SSID of Extended Interface: This...

3.6 WISP Mode Settings 
 
 
¾ Alias Name: Another name for WL-5460AP. 
¾ Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, 
by so doing, you won’t be able to make wireless connection with this Access Point in 
the network you are located. In other words, this device will not be visible by any 
wireless station.   
¾ Band: You can choose one mode of the following you need.    
~    2.4GHz (B): 802.11b supported rate only. 
~    2.4GHz (G): 802.11g supported rate only....