Air Live Router WL-5450AP User Manual

							31 
DNS Server Enter the Domain Name Service IP address. 
802.1d 
Spanning Tree To enable 802.1d Spanning Tree will prevent the network from 
infinite loops. Infinite loop will happen in the network when WDS is 
enabled and there are multiple active paths between stations. 
 
 
Clone MAC 
Address You can specify the MAC address of your Access Point to replace the 
factory setting. 
Apply Change Press to save the new settings on the screen.     
Reset Press to discard the data you have entered since last time you press Apply 
Change.  
  
						

							32 
Other 
Upgrade Firmware 
 
1. Download the latest firmware from your distributor and save the file on the hard drive. 
2. Start the browser, open the configuration page, click on Other, and click Upgrade 
Firmware to enter the Upgrade Firmware window. Enter the new firmware’s path and 
file name (i.e. C:\FIRMWARE\firmware.bin). Or, click the Browse button, find and open 
the firmware file (the browser will display to correct file path). 
3. Click Reset to clear all the settings on this page. Or click Upload to start the upgrade. 
Save/Reload Settings 
 
 
This function enables users to save the current configurations
 as a file (i.e. config.dat) To 
load configuration from a file, enter the file name or click Browse… to find the file from your 
computer.  
 
  
						

							33 
Save Settings to File: Click SAVE..   to save the current configuration to file.   
 
 
When prompted the upper left screen, select “Save this file to disk”, and the upper right 
screen will prompt you a dialog box to enter the file name and the file location.   
 
Load Settings From File: Click Browse… if you want to load a pre-saved file, enter the file 
name with the correct path and then click on Upload. Or click Browse… to select the file.  
 
 
Reset: Click to restore the default configuration. 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							34 
Password 
For secure reason, it is recommended that you set the account to access the web server of this 
Access Point. Leaving the user name and password blank will disable the protection. The login 
screen prompts immediately once you finish setting the account and password.    Remember your 
user name and password for you will be asked to enter them every time you access the web 
server of this Access Point.   
 
  
 
User Name E n t e r  y o u r  n e w  u s e r  n a m e  t o  a c c e s s  the web server. User name can be up 
to 30 characters long. User name can contain letter, number and space. 
It is case sensitive.   
New Password Set your new password. Password can be up to 30 characters long. 
Password can contain letter, number and space. It is case sensitive.   
Confirm Password   Re-enter the new password for confirmation.   
Apply Change Press to save the new settings on the screen.     
Reset Press to discard the data you have entered since last time you press Apply 
Change.