Air Live Router WL-1500R User Manual

Time 
This function enables users to set the time and date for the WLAN Routers real-time clock, select properly time zone, and 
enable or disable daylight saving. 
 
 
Figure 60 
 
Local Time:  Displays the local time and date. 
Time Zone: Select the time zone  from the drop-down list. 
Synchronize the clock with NTP Server: Enable or disable the WLAN Router auto matically adjust the system time from 
NTP Server. 
NTP server:  The Simple Network Time Protocol (SNTP) server allo ws the WLAN Router to...

Device Information 
This function enables users to view the WLAN Router’s WAN, Wireless, LAN and System configurations. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 61 
 
WAN: This section displays the WAN interface configuration including the MAC address, Connection status, DHCP client 
status, IP address, Subnet mask, Default gateway, and DNS.   
Wireless: This section displays the wireless configuration information, including the MAC addre ss, the Connection status, 
SSID, Channel and...

Log 
This function enables users to view a running log of Router system statistics, events, and activities. The log displays up to 
200 entries. Older entries are overwritten by new entries.  
 
Figure 62. 
 
The Log screen commands are as follows: 
Click  “First Page”  to view the first page of the log 
Click “Last Page” to view the final page of the log 
Click “Previous Page ” to view the page just before the current page 
Click  “Next Page ” to view the page just after the current page 
Click  “Clear...

Log Setting 
This function enables users to set Router Log parameters. 
 
Figure 63. 
 
SMTP Server: Type your SMTP server address here. 
Send to: Type an email address for the log to be sent to. Cli ck “Email Log Now” to immediately send the current log. 
SMTP Authentication: Selected the Enabled if the SMTP server need  for authentication, fill in account name and 
password in SMTP Account field and SMTP Password field. 
SMTP Account:  If the SMTP Authentication enabled, fill in the SMTP account name...

Statistic 
This function displays a table that shows the rate of packet transmission via t he WLAN Router’s LAN, WAN and Wireless 
ports (in bytes per second). 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 64. 
 
Click  “Reset”  to erase all statistics and begin logging statistics again. 
 
Restart 
Click “Restart”  to restart the system in the event  the system is not performing correctly. 
 
Figure 65. 
AirLive WL-1500R User’s Manual 
52  

Firmware 
This function enables users to keep the WLAN Router firmware up to date. 
 
Figure 66. 
 
Please follow the below instructions: 
Download the latest firmware from the manufacturers Web site, and save it to disk. 
Click “Browse”  and go to the location of the downloaded firmware file. 
Select the file and click  “Upgrade” to update the firmware to the latest release. 
                                                              AirLive WL-1500R User’s Manual 
53  

Configuration 
This function enables users to save settings as a profile and load profiles for different circumstances. User can also load 
the factory default settings, and run a setup wizard to configure the WLAN Router and Router interface. 
 
Figure 67. 
 
UPnP 
This function enables users to enable or disable the UPnP function on the WLAN Router. 
 
Figure 68. 
UPnP: Select to enable or disable the UPnP function on the WLAN Router. 
AirLive WL-1500R User’s Manual 
54  

Ping Test 
The ping test enables users to determine whether an IP address or host is present on the Internet. Type the host name or 
IP address in the text box and click Ping button to start the Ping test. 
 
 
Figure 69. 
                                                              AirLive WL-1500R User’s Manual 
55  

Remote Management 
This function enables users to set up remote management. Using remote management, the WLAN Router can be 
configured through the WAN via a Web browser. A us er name and password are required to perform remote 
management. 
 
Figure 70. 
 
HTTP:  Enables users to set up HTTP access for remote management. 
Remote IP Range:  Type a range of IP addresses that can be pinged from remote locations 
Gaming mode: If user is experiencing difficulties when playing onli ne games or even certain...

Technical Specifications 
 
General 
Standards IEEE 802.3u 100BASE-TX Fast Ethernet 
IEEE 802.11g; IEEE 802.11b 
Protocol CSMA/CD 
Radio Technology 802.11b: Direct  Sequence Spread Spectrum (DSSS) 
802.11g: Orthogonal Frequency Division Multiplexing (OFDM) 
Data Transfer Rate 802.11b: 1, 2, 5.5, 11Mbps (auto sense) 
802.11g: 6, 9, 12, 18, 24,  36, 48, 54Mbps(auto sense) 
Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex) 
Fast Ethernet: 100Mbps (half dupl ex), 200Mbps (full- duplex) 
Topology Star...