Air Live Router WL-1500R User Manual

Rear Panel 
The figure below shows the rear panel of the Wireless Broadband Router. 
 
 
Figure 2. Rear Panel 
 
Antenna 
There are one 2 dBi Gain Antenna in the rear panel for wireless connection. 
LAN (1-4) 
Four RJ-45 10/100Mbps Auto-MDIX ports for connecting to either 10Mbps or 100Mbps Ethernet connections. 
WAN 
In the four port broadband router, there is an RJ-45 10/100Mbps Auto-MDIX port for the WAN that will fit the xDSL/Cable 
modem’s specification need. 
DC IN 
Plug the power adapter to this...

Connect the Router using Wireless LAN 
 
 
Figure 3. Connecting the WLAN Router 
 
Plug in one end of the RJ45 network cable to the xDSL/Cable Modem. 
Plug in the other end of the RJ45 network cable to the Wireless Internet Broadband Router WAN port. 
 
 
Check the installation 
The control LEDs of the Wireless Internet Broadband Router ar e clearly visible and the status of the network link can be 
seen instantly: 
With the power source on, once the device is connected  to the broadband modem, the...

PC Network TCP/IP Setting 
The network TCP/IP settings differ based on the computer’s operating system (Win95/98/ME/NT/2000/XP) and are as 
follows. 
 
 
Windows 95/98/ME 
Click on the “ Network neighborhood ” icon found on the desktop.  
Click the right mouse button and a context menu will be show.  
Select “Properties ” to enter the TCP/IP setting screen.  
Select “Obtain an IP address automatically ” on the “IP address” field. 
 
Figure 4. Windows 95/95/Me IP setup 
 
Select “Disable DNS ” in the...

Select “None” for the “ Gateway address ” field. 
 
 
Figure 6. Windows 95/98/Me Gateway setup 
 
 
Windows 2000 
Double click on the “ My computer” icon on the desktop. When “ My computer” window opens, open the “ Control panel” 
and then open the “ Network dialup connection ” applet. Double click on the “Local area network connection” icon. Select 
“Properties” to enter the TCP/IP setting window. 
In the “ Local area network status ” window, click on “Properties.” 
In the “Local area network...

 
 
 
Windows XP 
Point the cursor and click the right button on the “My Network Place” icon. 
Select “properties” to enter the TCP/IP setting window. 
Set “IP address ” to “Obtain an IP address automatically .” 
Set “DNS” to “Obtain DNS server address automatically .” 
 
 
Figure 8. Windows XP IP and DNS setup 
AirLive WL-1500R User’s Manual 
12  

Wireless Broadband Router Configuration 
First make sure that the network connections are functioning normally.  
This Wireless Broadband Router can be configured using In ternet Explorer 5.0 or newer web browser versions. 
 
 
Login to the Wireless Broadband Router through WLAN 
Before configuring the Wireless Broadband Router through WL AN, make sure that the SSID, Channel and the WEP is set 
properly. 
The default setting of the Wireless Br oadband Router that you will use: 
SSID: airlive  
Channel:...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 11. Device information 
 
 
 
Configuration Menu 
When the main page appears, find the Configuration menu in the left side of the screen. Click on the setup item that you 
want to configure. There are six main options:  WAN, Wireless, LAN, Access Control, System and Wizard as shown in the 
Configuration Menu screen. 
AirLive WL-1500R User’s Manual 
14  

 
Figure 12. Configuration Menu 
 
 
Setup Wizard 
Setup wizard is provided as the part of the web configuration utility. User can simply follow the step-by-step process to get 
the wireless router configurat ion ready to run in 6 easy steps by clicking  on the “Wizard” button on the function menu. The 
following screen will appear. Please click “Next” to continue. 
 
Figure 13. Setup Wizard 
 
 
 
                                                              AirLive WL-1500R User’s Manual 
15  

 
 
Step 1: Set up new Password 
User can change the password and then click “Next” to continue. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 14. Setup Wizard – Set Password 
AirLive WL-1500R User’s Manual 
16  

Step 2: Choose time zone 
Select the time zone from the drop down list. Please click “Next” to continue. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 15. Setup Wizard – Set time zone 
 
Step 3: Set LAN and DHCP Server 
Set user’s IP address and mask. The default IP is 192.168.1. 254. If user likes to enable DHCP, please click “Enabled”. 
DHCP enabled is able to automatically a ssign IP addresses. Please assign the range  of IP addresses in the fields of 
“Range start” and “Range end”. Please click...