Air Live Router WL-1000UR User Manual

 41
Control table 
 
Control table is the table at the botto m of the MAC Address Control page. 
Each row of this table indicates the MAC address and the expected IP 
address mapping of a client. There are four columns in this table: 
 
MAC Address  MAC address indicates a specific client. 
IP Address Expected IP address of the corresponding 
client. Keep it empty if you dont care its IP 
address. 
C 
When 
Connection control  is checked, 
check  C will allow the corresponding 
client to connect to this...

 42
4.6.5 Miscellaneous Items 
 
 
Remote Administrator Host/Port 
In general, only Intranet user can  browse the built-in web pages to perform administration task. This 
feature enables you to perform administration task from  remote host. If this feature is enabled, only the 
specified IP address can perform remote administrati on. If the specified IP address is 0.0.0.0, any host 
can connect to this product to perform administrati on task. You can use subnet mask bits /nn notation 
to specified a...

 43
4.7 Advanced Settings 
 
 
4.7.1 System Time 
 
 
  

 44
Get Date and Time by NTP Protocol 
Selected if you want to Get Date and Time by NTP Protocol.   
Time Server 
Select a NTP time server to consult UTC time   
Time Zone 
Select a time zone where this device locates.   
Set Date and Time manually 
Selected if you want to Set Date and Time manually.   
Set Date and Time manually 
Selected if you want to Set Date and Time manually. 
Function of Buttons 
Sync Now:
 Synchronize system time with network time server 
Daylight Saving: Set up where the...

 45
IP Address for Syslog 
Host IP of destination where syslogs will be sent to. 
Check 
Enable  to enable this function.   
E-mail Alert Enable 
Check if you want to enable Email alert (send syslog via email).   
SMTP Server IP and Port 
Input the SMTP server IP and port, which are connect ed with :. If you do not specify port number, the 
default value is 25. 
For example, mail.your_url.com or 192.168.1.100:26.   
Send E-mail alert to 
The recipients who will rece ive these logs. You can assign more...

 46
Next you can enter the appropriate info
rmation about your Dynamic DNS Server. 
You have to define: 
Provider 
Host Name 
Username/E-mail 
Password/Key 
You will get this information when you r egister an account on a Dynamic DNS server. 
Example: 
z   
After Dynamic DNS setting is configured, click the save button.  

 47
4.7.4 SNMP Setting 
 
 
In brief, SNMP, the Simple Network Management Protoc ol, is a protocol designed to give a user the 
capability to remotely manage a computer netwo rk by polling and setting terminal values and 
monitoring network events.   
Enable SNMP 
You must check either Local or Remote or both to  enable SNMP function. If Local is checked, this 
device will response request from LA N. If Remote is checked, this device will response request from 
WAN.  
Get Community 
Setting the...

 48
4.7.5 Routing Table 
 
 
Routing Tables allow you to determine which physical interface address to use for outgoing IP data 
grams. If you have more than one routers and subnets,  you will need to enable routing table to allow 
packets to find proper routing path and allow different subnets to communicate with each other. 
Routing Table settings are settings used  to setup the functions of static.
 
Static Routing: For static routing, you can specify up to  8 routing rules. You can enter the...

 49
Example: 
 
 
 
Configuration on NAT Router 
Destination           SubnetMask        Gateway         Hop        Enabled 
192.168.1.0          255.255.255.0      192.168.123.216       1            ˇ 
192.168.0.0          255.255.255.0      192.168.123.103       1            ˇ 
 
So if, for example, the client3 wanted to send an  IP data gram to 192.168.0.2, it would use the above 
table to determine that it had to  go via 192.168.1.103 (a gateway),   
And if it sends Packets to 192. 168.1.11 will go...

 50
4.7.6 Schedule Rule 
 
 
 
You can set the schedule time to decide which servic e will be turned on or off. Select the “enable” item. 
Press  “Add New Rule” 
 
You can write a rule name and set which day and what time to schedule from “Start Time” to “End Time”. 
The following example configure “ftp time” as everyday 14:10 to 16:20