Home > Aiptek > Projector > AIPTEK Pocketcinema V10 Plus Lcos Users Manual

AIPTEK Pocketcinema V10 Plus Lcos Users Manual

    Download as PDF Print this page Share this page

    Have a look at the manual AIPTEK Pocketcinema V10 Plus Lcos Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 24 Aiptek manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    If the time arises to throw away your product, please recycle all the components possible. 
    Batteries and rechargeable batteries are not to be disposed in your domestic waste! Please recycle them at your local recycling point. 
    Together we can help to protect the environment. 
    Welcome:Thank you kindly for purchasing this fine product. Much investment in time and effort has gone into its development, and it\
     is our hope that it will give you many years of trouble-free service.
    Safety Notice:1. Do not drop, puncture or disassemble the device; otherwise the warran\
    ty will be voided.2. Avoid all contact with water, and dry hands before using.3. Do not expose the device to high temperature or leave it in direct su\
    nlight. Doing so may    damage the device.4. Use the device with care. Avoid pressing hard on the device body.5. For your own safety, avoid using the device when there is a storm or lightning.6. Do not use batteries of different specifications. Doing so may lead to the potential for serious    damage.7. Remove the battery during long periods between usage, as a deteriorat\
    ed battery may affect        the functionality of the device.8. Remove the battery if it shows signs of leaking or distortion.9. Use only the accessories supplied by the manufacturer.10. Keep the device out of the reach of infants.11. Risk of explosion if battery is replaced by an incorrect type.12. Dispose of used batteries according to the instructions.
    FCC Compliance Statement:This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cau\
    se harmful interference, and (2) this device must accept any interference\
     received, including interference that may cause undesired operation.
    This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interferen\
    ce in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause ha\
    rmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular\
     installation. If this equipment does cause interference to radio or television equipment recep\
    tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Move the equipment away from the receiver.-Plug the equipment into an outlet on a circuit different from that to which the receiver is  connected.-Consult the dealer or an experienced radio/television technician for ad\
    ditional suggestions.
    You are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void Your authority to operate such equipment.
    Downloaded From projector-manual.com Aiptek Manuals 
    						
    							
    Table of Contents
    Getting Started  ................................................................1
    Projector parts  ........................................................................\
    ..............1
    Reading LED indicators   ........................................................................\
    2
    Installing the battery........................................................................\
    ......2
    Charging the battery  ........................................................................\
    .....2
    Inserting a memory card (optional)   .......................................................3
    Turning on/off your projector  .................................................................3
    Adjusting the Focus  ........................................................................\
    ......3
    Functions and Operations   .............................................4
    Introduction to main menu  ....................................................................4
    Setting language  ........................................................................\
    ...........4
    Checking Memory   ........................................................................\
    .........5
    Playing Video  ........................................................................\
    ................6
    Playing back still pictures......................................................................7
    Playing back Powerpoint/PDF files   .......................................................7
    Inserting MP3 music into photo playing     ..............................................8
    Zoom function  ........................................................................\
    ...............8
    Playing back Music   ........................................................................\
    .......9
    Repeat playing video, still picture or music    .............................................9
    Playing back files in other devices   ........................................................10
    Menu operation  ........................................................................\
    .............12
    Menu items in Settings mode   ...............................................................12
    Managing the files in built-in memory or memory card from PC   ...........13
    Remote Controller........................................................................\
    .........14
    Battery Life Indicator  ........................................................................\
    .....14
    Specifications........................................................................\
    ................15
    Downloaded From projector-manual.com Aiptek Manuals 
    						
    							
    1
    Getting Started
    Projector parts
    Focus switch
    Speaker
    Strap holder
    USB connector
    Tripod socket
    Lens
    Battery cover
    SD/MMC card slot
    Speaker
    AV jack
    Left button
    Right button
    Menu button
    Power button
    Up button
    Down button
    OK button
    Power/Charging LED
    Downloaded From projector-manual.com Aiptek Manuals 
    						
    							
    
    
    Please charge the battery at least 3 hours prior to its first use.
    1.
     
    Connect the cable.
     Connect one end of the supplied AC adapter to the USB port of the projector and the other end to a wall outlet. OR Connect one end of the supplied USB cable to the USB port of the projector and the other end to a powered PC. Make sure the projector is powered off.
    2.
     
    The charging LED turns orange and the charge starts.
    3.
     
    When the charging is interrupted or the battery pack is 
    fully charged, the charging LED will turn green.
     When using a PC to charge the battery, do not turn on  the projector, or the charge will stop.
    Charging the battery
    1.   Slide the battery cover open.
    2.   Place the included Li-Ion battery 
    into the compartment. Note that the metallic contacts must be aligned with the contacts in the compartment.
    3.
     
    After the battery is properly 
    installed, replace the battery cover.
    Installing the battery
    Reading LED indicators
    The Power LED is lighting orange when projector is charged. 
    Only Power LED is lighting green when connected with AC power adapter in standby mode or complete charged mode. 
    If all of the LEDs are turned on, projector is in operation mode.
    Downloaded From projector-manual.com Aiptek Manuals 
    						
    							
    
    
    To insert a memory card, do the following:(1) Open the SD card cover. (2) Gently push the card as indicated until the card reaches the bottom of the slot. 
    To remove the memory card, gently push it down and it will pop up. Then pull the card out of the slot. 
    Inserting a memory card (optional)
    Press and hold down the Power button for 4 seconds to turn on the projector.
    To turn off the projector, press and hold down the Power button for 2 seconds.
    Turning on/off your projector
    Adjusting the Focus
    Please adjust the Focus switch to have a better view during usage.
    Downloaded From projector-manual.com Aiptek Manuals 
    						
    							
    44
    
    Introduction to main menu
    After turn on the projector, you will see “Welcome” screen first then main menu as below.
    Settings: This function allows users to set some preference settings such as                  Language, Brightness, Contrast, Saturation, Slideshow Speed,                  Auto power off and Beep sound.  
    Video: This function allows users to select video file to project from screen.  
    Photo: This function allows users to select JPEG image file to project from screen.  
    Music: This function allows users to select MP3 files to play from the projector.  
    Memory: This function allows users to check the available memory type and                 capacity and select it for target source for projection. \
    ●
    ●
    ●
    ●
    ●
    Setting language
    1. Turn on  the projector. The main menu will appear.
    2. Use the Left/Right button to select the Settings mode and press OK to enter the menu screen. 
    3. Use the Up/Down button to select the Language item, and then Press the Right button. 
    4. Move the Up/Down button to select a language.
    5. When done, press OK to confirm the setting.
    Functions and Operations
    Downloaded From projector-manual.com Aiptek Manuals 
    						
    							
    
    
    This function is to select which memory type to playback from and its ca\
    pacity and available size. The default is built-in memory.
    1.  Use the
     Left/Right button to select “Memory” and then press OK button.
      2.   The Memory Check box will display as below. Use the Up/Down button to select the memory type.
    Selection MemoryAvailable/Capacity
    669MB / 979MB
    1.9GB / 1.9GB
    3.  Press OK button after selection to return to the main menu.
    Checking Memory
     If there is no memory card inserted, the screen will only show internal\
     built-in memory status. 
    Downloaded From projector-manual.com Aiptek Manuals 
    						
    							
    
    
    Playing Video
    1.  Use the Left/Right button to select “Video” and then press OK button.
    2.  Use the Up/Down button to select target folder or video files to see the first screen of each video. Press the OK button to confirm the selection. (Some larger files may require more time to switch.)
    3. When selecting one Video file, press OK to play it back. (play once only)
    4. Use the Left/Right button to backward or forward to another video.
    5. You can use Up/Down button to control volume.
    6. Press OK can pause video, and press OK again can resume playing.
     It’s normal that the projector will feel warm with continuous use due to it\
    s high performance.
      Sometimes your video files with MP4, ASF or AVI file formats may not be able to play back by this projector. Please try using bundled ArcSoft Media Converter (AMC) program to convert video files into formats optimized for use on this projector. But it is not guaranteed that all of the input video files can be accepted by AMC for file conversion. 
         Supported file types for conversion (Input file formats)
     
    - Windows AVI files (*.AVI) 
     
    - Advanced Systems Format (*.ASF) 
     
    - Video CD (*.DAT)  
     
    - Quick Time files (*.MOV) 
     
    - MP4 files (*.MP4; *.M4V)
     
    - MPEG (*.MPG; *.MPEG; *.MPE) 
     
    - RealMedia Video (*.RMVB) 
     
    - Windows Media Video (*.WMV)  
     Supported file types for export  
     
    - MJPEG AVI (recommended) 
     
    - MPEG-4 ASF
     
    For details information, please check the “Help” under Extra from \
    AMC 
    program or visit AcrSoft web site at www.arcsoft.com to understand the key features and how to use.   
    Downloaded From projector-manual.com Aiptek Manuals 
    						
    							
    
    
    Playing back still pictures
    1.  Use the Left/Right button to select “Photo” and then press OK button.
    2.  Use the Up/Down button to select target folder or photo to see the pre-view image. Press the OK button to confirm the selection. 
    3. After a photo is selected, press OK to display full size of this photo.
    4. Use the Left/Right button to display last or next photo.
    When giving a presentation using PowerPoint/PDF documents, please save t\
    he PPT/PDF file into .jpeg format.  
    1. Execute PowerPoint/Acrobat program first.
    2. Open the PPT/PDF file.
    3. Launch “File” > “Save as” dialogue, then select “JPEG File Exchange Format” from “Save as type” drop-down list.
    4. Rename the file if necessary:  The playback sequence is in the order of the first digit Arabic numerals, such as 1, 10, 100, 101, 11, then 2, 20, 21, and so on. To avoid playback order confusion, please rename the file 1 ~ 9 as 01 ~ 09, 100 as A100, etc. 
    Playing back Powerpoint/PDF files
    Downloaded From projector-manual.com Aiptek Manuals 
    						
    							
    
    
    Zoom function
    1. Press Menu button for 2 seconds to show the function bar on the screen bottom. 
    2. Use the Left/Right button to select “Zoom-in” mode and use Down button to enter Zoom mode. A small Zoom screen will appear on the right down corner.
    3. Press Up button to go for Zoom x2, x3, x4, x1 or Down button for x4, x3, x2, x1 step by step.
    4. When you are in magnification of x2, x3 or x4, the Zoom screen will indicate the area of the original photo being displayed.
    5. Press and hold Right, Left, Up or Down button to move the view screen around the photo.
    6. Press Menu button to return to x1 stage and press Menu button again to exit the Zoom-in mode.
    1.
     
    Press 
    Menu button for 2 seconds to show the function bar on the screen bottom. 
     
    2.  Use the Up/Down button to select   (default setting) or . 
         Select   to play MP3 files in the same folder of displayed picture (s) and  
     to disable this function. 
    Inserting MP   music into photo playing  
     If you cannot hear music, please check if there are MP3 files in the same folder of the displayed picture (s). 
    Downloaded From projector-manual.com Aiptek Manuals 
    						
    All Aiptek manuals Comments (0)

    Related Manuals for AIPTEK Pocketcinema V10 Plus Lcos Users Manual