AIPTEK Pocketcinema V10 Plus Lcos Users Manual

If the time arises to throw away your product, please recycle all the components possible. 
Batteries and rechargeable batteries are not to be disposed in your domestic waste! Please recycle them at your local recycling point. 
Together we can help to protect the environment. 
Welcome:Thank you kindly for purchasing this fine product. Much investment in time and effort has gone into its development, and it\
 is our hope that it will give you many years of trouble-free service.
Safety Notice:1. Do not...

Table of Contents
Getting Started  ................................................................1
Projector parts  ........................................................................\
..............1
Reading LED indicators   ........................................................................\
2
Installing the battery........................................................................\
......2
Charging the battery  ........................................................................\...

1
Getting Started
Projector parts
Focus switch
Speaker
Strap holder
USB connector
Tripod socket
Lens
Battery cover
SD/MMC card slot
Speaker
AV jack
Left button
Right button
Menu button
Power button
Up button
Down button
OK button
Power/Charging LED
Downloaded From projector-manual.com Aiptek Manuals 



Please charge the battery at least 3 hours prior to its first use.
1.
 
Connect the cable.
 Connect one end of the supplied AC adapter to the USB port of the projector and the other end to a wall outlet. OR Connect one end of the supplied USB cable to the USB port of the projector and the other end to a powered PC. Make sure the projector is powered off.
2.
 
The charging LED turns orange and the charge starts.
3.
 
When the charging is interrupted or the battery pack is 
fully charged, the...



To insert a memory card, do the following:(1) Open the SD card cover. (2) Gently push the card as indicated until the card reaches the bottom of the slot. 
To remove the memory card, gently push it down and it will pop up. Then pull the card out of the slot. 
Inserting a memory card (optional)
Press and hold down the Power button for 4 seconds to turn on the projector.
To turn off the projector, press and hold down the Power button for 2 seconds.
Turning on/off your projector
Adjusting the Focus...

44

Introduction to main menu
After turn on the projector, you will see “Welcome” screen first then main menu as below.
Settings: This function allows users to set some preference settings such as                  Language, Brightness, Contrast, Saturation, Slideshow Speed,                  Auto power off and Beep sound.  
Video: This function allows users to select video file to project from screen.  
Photo: This function allows users to select JPEG image file to project from screen.  
Music: This...



This function is to select which memory type to playback from and its ca\
pacity and available size. The default is built-in memory.
1.  Use the
 Left/Right button to select “Memory” and then press OK button.
  2.   The Memory Check box will display as below. Use the Up/Down button to select the memory type.
Selection MemoryAvailable/Capacity
669MB / 979MB
1.9GB / 1.9GB
3.  Press OK button after selection to return to the main menu.
Checking Memory
 If there is no memory card inserted, the...



Playing Video
1.  Use the Left/Right button to select “Video” and then press OK button.
2.  Use the Up/Down button to select target folder or video files to see the first screen of each video. Press the OK button to confirm the selection. (Some larger files may require more time to switch.)
3. When selecting one Video file, press OK to play it back. (play once only)
4. Use the Left/Right button to backward or forward to another video.
5. You can use Up/Down button to control volume.
6. Press...



Playing back still pictures
1.  Use the Left/Right button to select “Photo” and then press OK button.
2.  Use the Up/Down button to select target folder or photo to see the pre-view image. Press the OK button to confirm the selection. 
3. After a photo is selected, press OK to display full size of this photo.
4. Use the Left/Right button to display last or next photo.
When giving a presentation using PowerPoint/PDF documents, please save t\
he PPT/PDF file into .jpeg format.  
1. Execute...



Zoom function
1. Press Menu button for 2 seconds to show the function bar on the screen bottom. 
2. Use the Left/Right button to select “Zoom-in” mode and use Down button to enter Zoom mode. A small Zoom screen will appear on the right down corner.
3. Press Up button to go for Zoom x2, x3, x4, x1 or Down button for x4, x3, x2, x1 step by step.
4. When you are in magnification of x2, x3 or x4, the Zoom screen will indicate the area of the original photo being displayed.
5. Press and hold...