Aiphone GTAC Instructions User Manual

FK1721 A P0311 OQ
GT-AC
Access Control keypad Module
Module clavier à codes rétro-éclairé
GH / GT-Codeschlossmodul
Módulo de teclado de control de acceso
Codeklavier-module
INSTALLATION & OPERATION MANUAL
NOTICE D'INSTALLATION ET D'UTILISATION
INSTALLATIONS- UND BEDIENUNGSANLEITUNG
MANUAL DE INSTALACIÓN Y USO
INSTALLATIE & GEBRUIKSHANDLEIDING
GT-AC 

2
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
2930
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
5960
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
8990
91
92
93
94
95
96
97
98
99
Registered User Code List / Liste des codes utilisateur programmés / Liste der registrierten Zugangscodes 
 Lista de códigos de los usuarios registrados / Lijst Codes Geregistreerde Gebruikers
group 1 / groupe...

3
English
English
Nederlands
Français
Deutsch
Español
General Prohibitions  Prohibition to Dismantle the Unit
General Precautions
WARNING
(Negligence could result in death or serious injury to 
people)
1.  Do not connect any non-specified power source to the 
V, V terminals, and do not install two power supplies in 
parallel to a single input. Fire, damage to the unit, or 
system malfunction could result.
2.  The unit is not explosion-proof. Do not install or use 
near gases or flammable materials. Fire or...

4
English
Nederlands
Français
Deutsch
Español
MOUNTING
1.  Fix the mounting bracket to the back (or surface-mount) 
box.
2.  Connect the wires to the unit.
3.  Mount GT-AC to the front frame.
  • Mount GT-AC from behind the front frame.
 •  Insert the notch into the slots on both sides.
4. Options
a.Rain hood
b.Hooded surface-mount box
c.Surface-mount box
* For details on mounting panels and modules other than 
the GT-AC, refer to the GF, GH or GT Installation and 
Operation Manual.
32
1
4
to GT-AC
to...

5
English
Nederlands
Français
Deutsch
Español
TCNO1C1NC1NO2C2NC2PB2PB1V V
TCNO1C1NC1PB2PB1
R1 R2ELB ELC ELMRY RY R1 R2EL EL +RY RY
V VNO2C2NC2
R1 R2ELB ELC ELMRY RY
R1 R2
ELB ELC ELMRY RY R1 R2EL EL +RY
Alarm, Security Only connecting to the terminal 
of relay 2 is possible. External output
C2
NO2
Power supply
(For GT-AC only)
Rating
Between 12 and 24V AC
Between 12 and 24V DC
Automatic gate
TimerFor relay 2 
Request to 
exit/entry button For relay 1 
Request to 
exit/entry button
2
NP
2
NP
2
NP
2
NP2...

6
English
Nederlands
Français
Deutsch
Español
FUNCTIONSSETTING UP
This section explains the settings of each function, including the master code for management, the user code for unlocking, the 
buzzer and the LEDs. 
About the setting mode:
Enter master code twice to switch to the setting mode, and enter the following setting code to perform the settings 
for the desired function. After settings have been made, enter the following setting codes to continue the setting 
operation. Press 
 to exit the...

7
English
Nederlands
Français
Deutsch
Español
Input the master code twice.
(Default:                                                                )
The result of each operation is indicated by the 
lighting up of the LED indicators on the upper section 
of the unit, and by the sounding of the buzzer.
- 
When the         key is pressed, the green LED lights up, the buzzer beeps twice, and the system exits the setting mode. 
(If the         key is included in the user code and the master code, the system...

8
English
Nederlands
Français
Deutsch
Español
   External output setting
(Default: OFF)
Input the setting code. 
Illumination IlluminationBlinks three times Blinking
OFFOFFDuring lockoutand forcedentry outputDuringLockout During forcedentry outputDuring lockout
and forced
entry output
·   If the pow er  i s  tur ned off and 
the       ,       , and        k ey s  ar e 
pr es s ed s i m ul taneous l y  w hi l e the 
unl oc k  1 i nput s tatus  i s  ac ti v e 
( s hor t c i r c ui t betw een ter m i nal s...

9
English
Nederlands
Français
Deutsch
Español
·  When the relay 1 output time is 
set to latched output, the 
auto-relock function is 
disabled.
·  When the auto-relock function 
is turned on, the unlock 
function of the request to 
exit/entry button of relay 2 is 
disabled.·  If the 0 key illumination function 
is turned on while the timer is 
on, only the 0 key illumination 
will light up, even if the "key 
illumination time setting" is set 
to "Indicator is continually lit".
OFFONOFF...

10
English
Nederlands
Français
Deutsch
Español
OPERATIONS
A.  Unlocking of user code
When the registered user code has been input using the 
keypad (between 4 and 6 digits), the LED indicator (group 
1: orange, group 2: green) lights up, the buzzer sounds, 
and the electric door strike is unlocked.
Orange LED lights up (during relay1 operation)Green LED lights up (during relay2 operation)
ex.): group 1
1006group 2
04B2
BeepBeep
•  The time interval during which the button must be 
pressed is...