Aimco Brakes AHCTSK Series Hydraulic Wrench Test Stands User Guide

 
  PROGRAMMING &  NAVIGATION 10 
AHCTS-K Series User’s Guide 
3  DATA MENU 
SEL: Enters menu. 
 
3-1  Print Memory 
Send: Prints the currently saved readings. 
 
3-2  Clear Memory 
CLR: Followed by ENT clears the readings saved in memory. 
 
3-3  Reset All 
CLR: Followed by ENT clears all readings and all sets. Should be used approximately 
every 5000 readings. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2-4 Information 
3 Data Menu 
3-1 Print Memory 
3-2 Clear Memory 
3-3 Reset All  

 
 
AHCTS-K Series User’s Guide 
 DESCRIPTION OF FUNCTIONS 11 
 
DESCRIPTION OF FUNCTIONS 
 
OPERATING MODES 
Peak, 1st Peak or Track will show on the display.  Press the Πkey to toggle them. 
 
Peak 
Recommended operating mode for stall tools. 
Displays and retains the maximum torque exerted by the tool, as occurs when operating 
the wrench in the tightening direction.  The Peak Mode is used for all power tools and dial 
wrenches. 
 
1st Peak 
Detects the “first peak” of torque exerted by the tool,...

 
 
AHCTS-K Series User’s Guide 
 DESCRIPTION OF FUNCTIONS 12 
HIGH LIMIT 
Use the high limit setting to visually flag the operator when a reading falls over a desired 
maximum value. High limits are set in the identical way as low limits. Please refer to the 
Low Limit section for details. 
 
NOTE: The green LED on the front of the display will flash when a peak is captured that 
falls within the limit setting.  
 
 
 
Reaction Points 
 
IT IS THE RESPONSIBILITY OF THE USER TO UNDERSTAND 
PROPER...

 
 
AHCTS-K Series User’s Guide 
 AIMCO LIMITED WARRANTY 13 
 
ADDITIONAL PRODUCT OPTIONS: 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
Auditor ATDA          Auditor ATDA-DC 
 
 
 
 
Auditor ATDA-8000 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
At left is an image of the possible configurations 
of AHCTS and AHCTS-K test stands.  Image 
illustrates various sizes, various reaction devices 
and illustration of rotary versus hydraulic test 
stands.  Hydraulic test stands do not have 
bushing support collar or rundown fixtures whilst...

 
 
AHCTS-K Series User’s Guide 
 AIMCO LIMITED WARRANTY 14 
 NEW TOOL AND ACCESSORY WARRANTY 
 
Any new tool or accessory branded with the AIMCO, Uryu, AcraDyne or Eagle Industries name, and  purchased from 
AIMCO, or through one of its authorized distributors or agents, is warranted to the original buyer against defects in 
materials and workmanship for a period of one (1) year* from date of delivery. Under the terms of this warranty, 
AIMCO will repair or replace any product or accessory warranted...

AIMCO CORPORATE HEADQUARTERS 10000 SE Pine Street 
Portland, Oregon  97216  
Phone: (503) 254– 6600 
Toll Free: 1 -800- 852-1368  
AIMC

O CHINA  
Room 607, No. 3998 Hongxin Rd Dibao Plaza  
Minhang District, Shanghai   
China  
Phone: 0086 -21- 34319246  
Fax: 0086- 21-34319245
  LIT-MA
N980      Rev. 03/2016  
Printed in USA  ©2016 AIMCO AIMCO C
ORPORATION D E
 MEXICO S A DE CV 
Ave. C ristobal C olon 14529 
Chihuahua, C hihuahua.  31125 
Mexico 
P
hone: ( 01-614) 380- 1010 
Fax: (01 -614) 380- 1019...