AGFA AP OPTIMA 147 User Manual

							6869
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
6869
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
Connecting to a PictBridge Compatible Printer
PictBridge allows printing images from a 
memory card in a digital camera directly to a 
printer, regardless of brand. To find out if a 
printer is PictBridge compatible, simply look 
for the PictBridge logo on the packaging or 
check the manual for specifications.With 
the PictBridge function on your camera, you can print the 
captured photos directly with a PictBridge compatible 
printer using the supplied USB cable, without the need for 
a PC.
Setting the USB mode
Since the camera’s USB port can be set to connect with 
either a PC or a Printer, the following steps will ensure 
that the camera is correctly configured to connect with a 
Printer.
1.

  Enter the camera setup menu and select USB cable 
with the Up/Down button, then press the 
 or Right 
button to enter.
2.
  Use the Up/Down button to select Printer. 3.
 
Press the 
 button to confirm the setting.
After the camera is reset, it will switch to PC mode 
automatically from USB mode. 
						

							6869
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
6869
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
Connecting the camera and printer.
1. Make sure both the camera and printer are turned on. 
2.  Connect one end of the supplied USB cable to the USB 
port on your camera.
3.

  Connect the other end of the cable to the USB port on 
the printer.
If the camera is not connected to a PictBridge compatible 
printer, the following error message will appear on the LCD 
screen.
The above error message will also appear if the USB 
mode were set incorrectly, in which case you should 
disconnect the USB cable, check the USB mode 
settings, ensure that the Printer is turned on, and 
then try connecting the USB cable again. 
						

							7071
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
7071
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
After setting the USB mode to Printer, the PictBridge menu 
will appear:
Press the Up/Down button to select a menu item, then 
Press the  or Right button to enter this item.
Refer to the following sections for more detailed informa-
tion on each setting.
Print with date
If you have set the date and time of your camera, the date 
and time will be recorded and saved with each photo you 
take.
1.
   Select  Print with date from the PictBridge menu. The 
following screen will appear:
2.  Use the Left/Right navigation buttons to scroll through 
the photos.
Using the PictBridge Menu 
						

							7071
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
7071
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
3. Use the Up/Down navigation buttons to select the 
number of prints for the current displayed photo.
4.
  Press the 
 button and the following screen will 
appear:
5.  Select Yes to confirm the printing, or Cancel. Then 
press the  button.
Print without date
Use this setting to print the photos without dates on them. 
1. Select Print without date from the PictBridge menu. 
The following screen will appear:
2.  Use the Left/Right navigation buttons to scroll through 
the images.
3.
  Use the Up/Down navigation buttons to select the 
number of prints for the current displayed image.
4.

  Press the 
 button and the following screenwill 
appear: 
						

							7273
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
7273
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
5. Select Yes to confirm the printing, or Cancel. Then 
press the  button.
Print index
You can use this setting to print all indexes to show all the 
photos currently in your camera.
1.
  Select  Print index from the PictBridge menu. The 
following screen will appear:
2.  Select Yes to confirm the printing, or Cancel. Then 
press the  button. 
						

							7273
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
7273
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
Print DPOF (Digital Print Order Format)
To use DPOF printing, you must select the photos for print-
ing using the DPOF settings before hand. see the “DPOF
” 
section on page 53.
1.

  Select  Print
 DPOF
 from the  PictBridge
 menu. The fol-
lowing screen will appear:
2.  Select Yes to confirm the printing, or Cancel. Then 
press the  button.
Exit
To exit the PictBridge menu, select Exit. The “Remove USB 
cable” message will be displayed.
Disconnect the USB cable from the camera and printer. 
						

							7475
APPENDICES
Specifications
Design and specifications are subject to change without notice.
Model nameOPTIMA 147
Active Image Sensor Pixels14.14 Megapixels
Total Image Sensor Pixels 14.48 Megapixels [1/2.3"CCD]
Lens Focal Length
5.9mm (Wide) — 41.3mm (Tele)
[35mm film equivalent] [32.9mm (Wide) — 230.3mm (Tele)]
F number F3.4 (Wide) — F5.7 (Tele)
Lens Construction 7 groups 9 elements
Optical Zoom 7x
Focusing Range Normal: (Wide) 60cm ~ ∞, (Tele) 80cm ~ ∞ 
Macro: 5cm ~ ∞ (Wide Only)
Anti-Handshake Digital Image Stabilization
Digital Zoom 6x Digital Zoom (Combined Zoom: 42x) 
						

							7475
AgfaPhoto OPTIMA 147
7575
AgfaPhoto OPTIMA 147
Model nameOPTIMA 147
Number of 
Recording 
PixelsStill Image 
14MP: 4320x3240, (3:2)12MP: 4320x2880, (16:9)10MP: 4320x2432, 8MP: 
3264x2448, 5MP: 2592x1944, 3MP: 2048x1536, 0.3MP: 640x480
Movie 720p30, 720p15, VGA, QVGA
Image Compression Best, Fine, Normal
DCF, DPOF (Ver1.1) Support Yes
File Format Still Image
Exif 2.2 (JPEG)
Movie Movie Format: MOV (Motion JPEG), Audio: G.711 [Monaural]
Shooting Modes Auto, Manual, Image Stabilization, Panorama, Movie, ASCN, Portrait, Scen\
e 
(Sport, Landscape, Children, Indoor, Leaf, Beach, Text, Party, ID, Fish\
eye, 
Panning Shot, Photo Frame, Sketch, Snow, Sunset, Fireworks, Glass, Museum, 
Night Landscape, Night Portrait)
Detection Features Face, Smile, Blink
Red-Eye Removal Yes
HDR Yes (Post-Processing)
Panorama 
Capture Still Image
Yes (Horizontal)
View Angle 0° ~ 135° 
						

							7677
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
7677
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
Model nameOPTIMA 147
LCD Display3.0inch (230k Pixels)
ISO Sensitivity Auto, ISO64/100/200/400/800/1600
AF Method Single AF, Multi-AF (TTL 9-point), Face-Detection, AF Assist Light (O\
n/Off)
Exposure Metering Method Artificial Intelligence AE (AiAE), Center-Weighted Average, Spot (F\
ixed to 
Center of Frame), Face AE
Exposure Control Method Program AE (AE-Lock Available)
Exposure Compensation ±2EV in 1/3 Step Increments
Shutter Speed 1/2000 ~ 4 Seconds (Manual: 30 Seconds)
Continuous Shooting Yes
Playback Modes Single Photo, Index (9/16 Thumbnails), Slide Show, Movie, Date  
Zoom (Approx. 2x ~ 8x), Histogram Display
White Balance Control Auto (AWB), Daylight, Cloudy, Fluorescent, Fluorescent CWF, Incandesce\
nt, 
Manual 
						

							7677
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
7677
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
Model nameOPTIMA 147
Internal FlashFlash Modes
Auto, Red-Eye Reduction, Forced Flash, No Flash, Slow Synchro, Red-Eye 
Reduction + Slow Synchro
Shooting Range (Wide) Approx. 0.6 ~ 4.0m (ISO 800) 
(Tele) Approx. 0.8 ~ 2.5m (ISO 800)
Recording Media Internal Memory: Approx. 50 MB
SD/SDHC Card (Up to 32GB Support) [Nonsupport MMC Card]
Other Features PictBridge, ExifPrint Support, Multi-Language Support (26 Languages)
Jacks USB Arm
Power Rechargeable Li-ion Battery SKL-50, 3.7V 880mAh, In-Camera Charging
Shooting Capability (Battery Performance) Approx. 280 Shots (Based on CIPA Standards)
Operation Environment Temperature: 0~40o
C, Humidity: 0~90%
Dimensions (W x H x D) Approx. 101.5 x 56.9 x 24.0mm (Based on CIPA Standards)
Weight Approx. 129g (Body only)
Supplied Accessories Rechargeable Li-ion Battery, AC adapter, USB Extension Cable 
Wrist Strap, CD-ROM 
Quick Start Guide, Warranty Card