AGFA AP OPTIMA 147 User Manual

							5859
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
5859
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
Menu Wallpaper:
Use Up/Down button to select the Menu Wallpaper option, 
press 
 button to confirm or press Left button to return 
to last page, and press 
 to exit the menu. 
•  User
•  AgfaPhoto
•  Sparkling
Startup Screen: 
Use Up/Down button to select the Startup Screen option, 
press 
 to confirm or press Left button to return to last 
page, and press 
 to exit the menu.
•  User
•  AgfaPhoto 
						

							5859
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
5859
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
Set back to default:  
Use Up/Down button to select Back To Default, press  
to confirm or press Left button to return to last page, and  
press 
 to exit the menu.
•  Yes
•  No 
						

							6061
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
6061
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
Setup Menu
Mode : AUTO        
  
The Setup menu for the camera is available in all modes. 
Each menu page can be selected by pressing the  
button and switching between menus with the Left/Right 
button.
To adjust the settings:
1.  Select the menu page with the function you want to 
adjust and press the Down button. 2.
  
Switch between different functions with the  Up/Down 
button.
3.

  Press the 
 or the Right button to enter the 
submenu.
After selecting a function option, you can press the 
Up button to return to the menu for other Camera 
Setup pages. Or you can press the Down button to 
switch to the next menu page.
Refer to the following pages for more details about each 
setting. 
						

							6061
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
6061
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
LCD Brightness
Use this setting to adjust the brightness of your LCD 
screen.
1.
  Select the  LCD
 Brightness
 setting from the  Setup
 
menu as described previously.
2.

  Select auto or adjust the brightness level using the 
Left/Right button, and press the 
 button to confirm 
the setting.
Beep
Use this setting to adjust the volume of beep when buttons 
are pressed and change the tones for Shutter button, self-
timer, and power-on/power-off.
To change this setting:
1.

  Select the  Beep
 setting from the  Setup
 menu as 
described previously.
2.

  Use the  Up/Down
 navigation buttons to switch 
between volume, shutter, key, self-timer, and power 
fields.
3.  Press the  or the Right button to enter, and Press 
the Up/Down button to adjust volume and change 
various sounds, then Press the 
 button to confirm 
the setting. 
						

							6263
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
6263
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
• LCD Off : 
ON, 30 sec, 1 min, 2 min.
•
  Camera Off :  
ON, 3 min, 5 min, 10 min.
4.

  Press the 
 button to confirm.
Zone
The Zone setting is a useful function on your overseas 
trips. This feature enables you to display the local time on 
the LCD screen while you are overseas.
1.

  Select the  Zone
 setting from the  Setup
 menu as 
described previously. The world time screen appears.
2.

  Use the  Up/Down
 navigation buttons to switch 
between the hometown ( 
 ) and travel destination  
(  ) fields.
3.  Use the  Left/Right
 navigation buttons to select a city 
close to the desired time zone. Then press the 
 
button to confirm.
Power Saver
This setting allows you to save power and get the 
maximum possible running time for your battery. Follow 
the steps below to turn off the LCD screen and camera 
automatically after a period of inactivity.
1.

  Select the  Power
 Save
 setting from the  Setup
 menu as 
described previously.
2.

  Press the Up/Down button to select screen power and 
camera power, then Press the 
 or the Right button 
to enter.
3.  Press the Up/Down button to adjust the selected item. 
Both items have the following options: 
						

							6263
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
6263
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
File and Software
Date/Time
See “Setting
 the
 Date
 and
 Time
“ section on page 16.
Language
See “ Setting
 the
 Language
“ section on page 15.
Format Memory
Please note: formatting enables you to delete all contents 
in the memory card and built-in memory, including protected 
photo and movie files.
To use this setting:
1. Select the Format in File and Software menu.
2.  Use the  Up/Down
 navigation buttons to select  Yes
 or 
No . Then press the 
 button to confirm.
3.  Select Yes, the camera will format the selected media.
4.  Please note that when you perform the Format 
Memory function, it only formats the active memory. If 
a memory card is inserted, the memory card is active 
and will be formatted. If there is no memory card, the 
internal memory is active and the internal memory will 
be formatted. Formatting the memory card will not 
automatically format the internal memory. 
						

							6465
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
6465
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
Copy to Card (Copy internal memory to 
memory card)
Use this setting to copy the files stored in the internal 
memory to the memory card.
1. Select the  Copy to memory card
 in File and Software 
menu.
2.  Use the  Up/Down
 navigation buttons to select  Yes
 or 
No . Then press the 
 button to confirm.
File Numbering
After you take a picture or video clip,the camera will save 
it in a sequential number. You can use this to reset the file 
numbering to 1. (When more than 999 images are on the 
memory card, the use of this features will have no effect.)
1.  Select the File Name in File and Software menu.
2.  Select the option with the Up/Down button and press 
the 
 button for confirmation. 
						

							6465
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
6465
AgfaPhoto OPTIMA 147 AgfaPhoto OPTIMA 147
FW Version (Firmware Version)
Use this setting to view and update the current camera 
firmware version.
1.
  Select the  FW Version
 in File and Software menu.
2.

  The screen will show the current firmware version. 
If there is a memory card with a firmware file, the 
camera will detect it and ask if you want to update the 
firmware. 
To update to the latest firmware version, you can go 
to the following website: www.reddotimaging.com 
and look under Support.
Reset Settings
Use this setting to restore the camera to its default 
settings.
1.  Select the  Reset
 setting in File and Software menu.
2.  Use the  Up/Down
 navigation buttons to select  Yes
 or 
No . Then press the 
 button to confirm. 
						

							6667
Transmission
Connecting to a PC
You can connect to the PC by using the USB interface on 
the camera or the USB cable. Once connected you can 
manually transfer the files or use software such as Arcsoft 
(included on disc).
Setting the USB mode
Since the camera’s USB port can be set to connect with 
either a PC or a Printer, the following steps will allow you to 
ensure that the camera is correctly configured to connect 
with a PC.
1.

  Enter the camera setup menu and select USB Mode 
with the UP/Down button, then press the 
  or the 
Right button to enter.
2.

  Use the  Up/Down
 navigation buttons to select  PC
.
3.

  Press the 
 
button to confirm the setting.
Transferring files to your PC
The computer will automatically detect the camera as a 
removable drive. Double click on My Computer (or Computer) 
to access your computer drives. Locate the removable 
drive, browse the directory to locate your files and copy the 
folders/files as you normally do on a computer.
To use the Arcsoft software to transfer files to your 
computer, please connect the camera to the computer and 
follow these steps:
1.

  Start a computer to which ArcSoft software has been 
installed.
2.

  Make sure both the camera and PC are turned on. 
3.  Connect the camera with PC: 
• Connect USB interface of the camera with PC; 
•  connect one end of attached USB cable with the 
camera, and connect another end with PC. 
						

							6667
AgfaPhoto OPTIMA 147
6767
AgfaPhoto OPTIMA 147
Windows operating system (Windows 2000, Windows 
XP, Windows Vista, Windows 7.)
Click [Remove hardware safely] icon in the taskbar, and 
remove USB according to the displayed menu.
Macintosh
Drag the untitled icon to the Trash. ("Untitled")
4. Please unplug USB after transmitting.
If USB connection item is set as [Computer]: 
First remove the camera from the system as indicated 
below, then turn off and remove USB.
If USB connection item is set as [Computer 
(PTP)]:
Please operate according to the following steps: remove 
the camera from the system firstly, then turn off and 
remove USB.