AGFA AP OPTIMA 105 User Manual

AgfaPhoto OPTIMA 105 
50 
 
Trim 
The Trim function allows you to trim an image to another image size. This function is only available for still 
images. 
 
To trim an image: 
1. Set the camera to Playback Mode . 
2. Use the 
 or   keys to scroll and select an image to 
trim. 
3. Press the MENU button to launch the Playback menu. 
4. Select Trim. The Trim screen layout is displayed on the 
LCD monitor.
 
5. Use the Zoom dial to change size as zoom in/out.  
 
No Description 
1 Enlarged image 
2 4-way...

AgfaPhoto OPTIMA 105 
51 
 
Resize 
Resizes a previously saved image and only resizing to a smaller size is available. 
 
 
 
To resize an image: 
1. Set the camera to Playback Mode . 
2. Use the 
 or   keys to scroll and select an image to 
resize. 
3. Press the MENU button to launch the Playback menu. 
4. Select Resize. The Resize submenu is displayed on the 
LCD monitor. 
5. Select size among: 8M, 5M, 3M, and VGA. Available size 
settings may vary depending on original image size. 
Unavailable...

AgfaPhoto OPTIMA 105 
52 
 
DPOF 
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on 
your memory card. You can select the images to be printed and how many prints to make with the DPOF 
menu in the camera and insert the memory card to the card compatible printer. When the printer starts 
printing, it will read the embedded information on the memory card and print the specified images. 
 
To set DPOF: 
1. Press the MENU button to launch the Playback...

AgfaPhoto OPTIMA 105 
53 
 
Using the Setup Menu 
You can access the Setup menu whether you are in Record or Playback Mode. 
The Setup menu allows to configure general camera settings. 
 
To go to Setup Menu: 
1. Press Menu button   to launch the Record/Playback 
Menu. 
2. Use the 
 or   keys to switch the menu tab to Setup 
menu. 
3. Use the 
 or   keys to move through the menu 
selections. 
4. To select an item, press the SET button or 
 key. 
5. Change the submenu settings using the 4-way navigation...

AgfaPhoto OPTIMA 105 
54 
 
Setting LCD Save 
Enable the LCD Save function to automatically decrease the LCD 
brightness to conserve battery power. When the camera is idle 
for 20 seconds, the LCD darkens. Press any button to resume to 
normal brightness. 
 
• The camera is idle when no buttons are pressed. LCD 
Save, though enabled, does not function during video 
playback, slideshow, video recording and Pre-Composition 
scene mode shooting.
 
 
Setting Date & Time 
Use the Date & Time function to set...

AgfaPhoto OPTIMA 105 
55 
 
Setting TV Out 
Use the TV Out function to adjust video output signal to accommodate different regional settings. If TV out 
is not set correctly, the image may not display properly on TV. 
 
Available settings are: 
• NTSC. Applicable in Japan, USA, Canada, Taiwan and 
others. 
• PAL. Applicable in Europe, Asia (excluding Taiwan), 
Oceania and others.
 
 
 
 
Setting LCD Brightness 
Select a brightness level for the LCD monitor. 
Available settings are: 
• Auto. Auto detects...

AgfaPhoto OPTIMA 105 
56 
 
Reset All 
Use this function to reset the camera to its factory settings. 
However, the following settings are exceptions and not affected 
by Reset. 
• Date & Time 
• Language 
• TV Out 
• Custom White Balance data
 
Making Connections 
You can connect your camera to: TV, computer, or a printer. 
 
Connecting the Camera to a TV 
You can play back your images on a TV screen. Before connecting to any video devices, make sure to 
select NTSC/PAL to match the broadcast standard...

AgfaPhoto OPTIMA 105 
57 
 
4. The USB Mode menu appears on the screen. Select 
Computer by using the 
 or   key and press the SET 
button. 
5. The PC starts to detect the connection while the LCD 
monitor appears Connecting… 
6. Connection established after PC Mode appeared on the 
LCD monitor 
 
 
 
7. Access the files in the camera by your PC. 
 
 
• The camera’s internal memory and memory card would display as removable 
drives in PC.   
• After the connection, no image is displayed on the LCD...

AgfaPhoto OPTIMA 105 
58 
 
Connecting the Camera to a Printer  
You can print your images directly using a PictBridge compatible printer. 
 
1. Turn on your Printer. Check that the printer is turned on, 
there is paper in the printer, and there are no printer error 
messages. 
 
 
 
 
2. Connect one end of the USB cable to the printer while the 
other end to USB terminal on the camera. 
 
 
 
  
3. The USB Mode menu appears on the screen. Select 
Printer by using the 
 or   key and press the SET...

AgfaPhoto OPTIMA 105 
59 
 To set Printer Settings 
1. Use the  or   key to specify a print option. 
2. Modify paper size and quality by the 
 or  keys. 
Available setting: 
• Paper size: Default / A4 / 4x6 
• Quality: Default / Fine / Normal 
3. Select Print on the screen for printing. 
Or Cancel to go back Print Mode. 
 
Start Printing 
• LCD monitor appears Now printing…. 
• Or press Menu button 
  to stop printing anytime.