AGFA AP OPTIMA 105 User Manual

AgfaPhoto OPTIMA 105 
30 
 
5. Press SET button to continue the second shot. 
6. Or, press Menu button to go back the first shot. 
 
 
 
 
 
 
 
 
 
 
7. Repeat step 4 to 6, until the pattern is filled in images. 
8. Press SET button to save the composed image. 
9. Or, press Menu button to go back last shot. 
 
 
 
 
 
 
 
 
 
10. The camera saves the image to memory. 
11. Use USB cable or memory card reader (Please refer to 
Connecting the Camera to a PC on page 56) to transfer 
the image to PC and...

AgfaPhoto OPTIMA 105 
31 
 
Using Smile Capture Mode   
When facing camera, especially kids, smiles are always short and hard to seize by manual shutter. Smile 
capture mode detects every smile all the time and performs Automatic Focus (AF) to capture an image 
without pressing Shutter button.     
 
Follow the instructions to get a Happy image by Smile 
Capture Mode: 
1. Select Smile capture mode from scene menu. 
2. Focus the camera on the subject to capture. 
3. When a smile is detected, the white...

AgfaPhoto OPTIMA 105 
32 
 
3. Move your position until photographer confirm your whole 
or half body in the frame and in the right place. 
 
4. Press the Shutter button. Camera stores the image 
produced by this step only. 
 
 
Using Love Portrait 
Want to take a good image when there are just two of you? All you have to do is hold the camera and show 
your smiles together.   
If over two faces had been recognized, the camera performs 2-second countdown with a beep notice then 
take a shot without...

AgfaPhoto OPTIMA 105 
33 
 
Using Shutter Priority Mode 
This mode is designed for capturing moving subjects. A faster shutter speed is required to freeze a motion 
(flying birds), while the slower shutter speed creates a sense of motion (water flowing). 
 
 
To set Shutter values 
1. Select Shutter Priority Mode from the Scene Mode 
submenu. 
2. Press SET button to enter the adjust mode. 
3. Use the 
 or   keys to select the shutter value 
options. 
4. Press the Shutter button to capture the image....

AgfaPhoto OPTIMA 105 
34 
 
 
Setting the Drive Mode 
 
Your camera features a Self-timer and Burst which can be set 
in the Drive Mode function in the Record Menu. The Self-timer 
allows you to take images after a pre-defined delay. While 
burst lets you take consecutive shots. This function is only 
available in recording still images. The Drive Mode setting is 
automatically set to off when you turn off the camera. 
 
To set the Drive Mode 
1. From the Record menu, select Drive Mode. 
2. Use the 
 or...

AgfaPhoto OPTIMA 105 
35 
 
Setting the AEB 
 
AEB stands for Automatic Exposure Bracketing. It permits 3 consecutive images in the order of standard 
exposure, under exposure and overexposure compensation. 
 
To set AEB 
1. From the Record menu, select AEB. 
2. Use the 
 or   keys to go through the selection. 
3. Press the SET button to save and apply changes.
 
 
 
Setting the AF Area 
 
AF stands for Automatic Focus. This feature determines the 
area on which the camera focuses. 
 
To set AF Area 
1....

AgfaPhoto OPTIMA 105 
36 
 
Setting Sharpness  
This function allows you to enhance or soften finer details of 
your images. 
 
To set Sharpness 
1. From the Record menu, select Sharpness. 
2. Use the 
 or   keys to go through the selection. 
3. Press the SET button to save and apply changes. 
 
The table below shows the available Sharpness settings.
 
 
Icon Item Description 
 High  Sharpens the image. 
 Normal   Normal sharpness. 
 Low  Softens the image. 
 
Setting Saturation 
 
The Saturation...

AgfaPhoto OPTIMA 105 
37 
 
Setting Contrast 
 
This function allows you to adjust the contrast of your images. 
 
To set Contrast 
1. From the Record menu, select Contrast. 
2. Use the 
 or   keys to go through the selection. 
3. Press the SET button to save and apply changes. 
 
Icon Item Description 
 High  Enhance the contrast 
 Normal   Normal contrast 
 Low  Reduce the contrast 
 
Setting the Digital Zoom 
 
This feature controls the digital zoom mode of your camera. 
Your camera enlarges an image...

AgfaPhoto OPTIMA 105 
38 
 
Setting the Date Stamp 
 
The date of recording can be printed directly on the still 
images. This function must be activated before the image is 
captured. Once date and time are stamped on an image, they 
can no longer be edited or deleted. 
Limitations of Date Stamp functions are as follows: 
• Available for still images only. 
• May slow down AEB/ Burst Mode when Date Stamp is 
enabled in AEB/ Burst Mode. 
• In vertical or rotated images, the date and time on your 
images...

AgfaPhoto OPTIMA 105 
39 
 
Settings of Recording Videos 
Press Function button   to enable video setting menu before recording a video. 
 
Movie Size 
 
The Movie Size function appears only in Movie Mode. Use this 
function to adjust the resolution and quality of movie clips.   
 
 
 
 
 
 
    
The table below shows the available size and corresponding image quality settings. 
 
Icon Item Description 
 
1280 X 720 
HDTV: Only support SDHC Class(6) 
The length of a single video recording is up to 29...