AEM CoilOnPlug COP Conversion Kit 302860 User Manual
Have a look at the manual AEM CoilOnPlug COP Conversion Kit 302860 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 223 AEM manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Page 21 10-2860 B Series COP Instructions RevB 111117 SPECIFICATIONS 30-2860 B Series COP Ignition Type Inductive with Igniter Ignition Channels 4 Timing Pattern 24 Crank, 1 Cam Timing Pattern Signal 12 volt square wave Ignition Trigger Signal 5 volt logic level falling edge trigger Boost Level Up to 15 psi Max Dwell Time See Table 1 Operating Voltage (nominal) 12 volts dc RECOMMENDED PARTS 30-51XX Analog Style Gauges 30- 44XX Digital Style Gauges 30- 2340 4 Channel UEGO Controller 30- 4100 Digital Gauge Style UEGO Controller 30- 5130 Analog Gauge Style UEGO Controller 30- 2310 Inline UEGO Controller 30- 2500 AQ1 Data Logger 30- 2821 4 Channel Twin Fire CDI (Optional upgrade for higher boost levels above 15 psi, some wiring required) REPLACEMENT PARTS 30-284 0 4 Channel Ignit er 30- 3255 Honda EPM 30- 2850 Coil 35- 3860 B Series COP Harness 35- 3861 EPM Harness If further tuning help is needed be sure to visit the video gallery or performance electronics forum at www.aemelectronics.com for comprehensive instructi onal videos and information.
Page 22 10-2860 B Series COP Instructions RevB 111117 WARRANTY 12 MONTH LIMITED WARRANTY Advanced Engine Management Inc. warrants to the consumer that all AEM High Performance products will be free from defects in material and workmanship for a period of twelve (12) months fro m date of the original purchase. Products that fail within this 12- month warranty period will be repaired or replaced at AEM’s option, when determined by AEM that the product failed due to def ects in material or workmanship. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. W arranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non- transferable. All implied warranties shall be limited in duration to the said 12 m onth warranty period. Improper use or installation, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Goods Authorization (RGA) number. Product must be received by AEM within 30 days of the date the RGA is issued. Please note that before AEM can issue an RGA for any product , it is first necessary for the installer or end user to contact the AEM Performance Electronics tech line at 1- 800-423-0046 to discuss the problem. Most issues can be resolved over the phone. Under no circumstances should a system be returned or a RGA requested before the above process transpires. Need additional help? Contact the AEM Performance Electronics tech department at 1 -800- 423-0046 or [email protected] , or visit the AEM Performance Electronics forum at http://forum.aempower.com/forum/