Home > AEM > Coil-On-Plug Conversion Kit > AEM CoilOnPlug COP Conversion Kit 302860 User Manual

AEM CoilOnPlug COP Conversion Kit 302860 User Manual

Add to Favourites
    Download as PDF

    View the AEM CoilOnPlug COP Conversion Kit 302860 User Manual for free. All the AEM manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 WARNING: ! WARNING: This installation is not for the tuning novice! Use this system with EXTREME caution! If you are not well versed in engine dynamics and the tuning of engine management systems DO NOT attempt the installation. Refer the installation to an AEM trained tuning shop. A list of AEM trained tuning shops is available at www.aemelectronics.com/dealer_locator.php or by calling 800 -423- 0046. NOTE: All supplied AEM calibrations,...
    Page 2 Page 2 10-2860 B Series COP Instructions RevB 111117 KIT CONTENTS 1 x 35- 2840 IGNITER W/ B RACKET 1 x 30-3 255 HONDA EPM 4 x 30-2 854 COIL 1 x 35- 3860 B SER IES COP HARNESS 1 x 35- 3861 E PM HARNESS 2 x #6 M OUNTING S CREW 2 x DI ELECTRI C GREASE INSTALLATION TIPS 1.R ead through the entire manual and instructions before beginning the installation. 2. Disconnect the negative battery cable(s) before beginning any work. 3. Maintain a c lean and neat work area throughout the...
    Page 3 Page 3 10-2860 B Series COP Instructions RevB 111117 Remove the retaining clip from the drive gear and remove the pin, drive gear, and shim. Save the parts as they will be reused on the EPM. See Figure s 2 and 3 below. Figure 1. Factory Distributor Figure 2. Factory Distributor
    Page 4 Page 4 10-2860 B Series COP Instructions RevB 111117 AEM Engine Position Module (EPM) Apply a small amount of clean engine oil to the shaft on the EPM and install the shim, drive gear, pin, and retaining clip. See Figure 4 below. Apply a small amount of clean engine oil to the O -ring on the EP M and install the EPM as shown below in Figure 5. Secure the EPM using one of the stock distributor bolts and washers. Figure 3. Retaining Clip, Pin, Drive Gear, and...
    Start reading AEM CoilOnPlug COP Conversion Kit 302860 User Manual
    All AEM manuals