Home > AEG > Fridge freezer > AEG Su 86000 1i Installation Instructions

AEG Su 86000 1i Installation Instructions

Add to Favourites
    Download as PDF

    View the AEG Su 86000 1i Installation Instructions for free. All the AEG manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 SANTO ARCTIS Integrierbare Unterbau-KŸhl- und GefriergerŠte RŽfrigŽrateurs et congŽlateurs sous-plan ˆ intŽgrer Ge•ntegreerde onderbouwkoel- en vriesapparaten Integrated built-under refrigerators and freezers Integrerbara underbŠnk-kyl- och frysskŒp Tyštason alle asennettavat jŠŠkaapit ja pakastimet Frigoriferi e congelatori sottotavolo da incasso kMontageanweisung 2-10 pInstructions de montage 11-19 NMontage-aanwijzing 20-28 tInstallation instructions 29-37 UMonteringsanvisning 38-46 qAsennusohjeet...
    Page 2 Grid preparationt When changing the side at which the door opens, remove plug from the mains. Left door opening: +Remove the left side (A) of the grid cutting it from the rear (see figure) Right door opening: +Remove the right side (B) of the grid cutting it from the rear (see figure) Re-install the grid to the base of the appli- ance by pushing on to the clasps (a) until they click. To reverse the opening direc- tion of the door, proceed as shown in the figures: 29 a a DO002/2 A B Reversing the door The...
    Page 3 Changing over the freezer compartment door (not on all models) 30 6 8 7 2 3 10 11 9 1213 Warning! After completion of the door reversing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this pro- cess by heating up the part involved with a normal hair- dryer on a low setting. +Open the freezer compartment door a little...
    Page 4 31 Position the covering cap (M) on the opposite side. Turn the freezer compartment door through 180¡ and fit the lower door bearing into the lower bearing cavity of the freezer compartment door. Lift the freezer compartment door a little way upwards, fit it into the upper door bearing, and at the same time insert the lower door bearing into the square hole. Small upwards and downwards adjustments of the freezer compartment door will make fitting easier. + + + AEG43 M Installation kit 1 1xA 12 1xB 2xC 2...
    Start reading AEG Su 86000 1i Installation Instructions

    Related Manuals for AEG Su 86000 1i Installation Instructions

    All AEG manuals