AEG Skd 71800 F0 User Manual

SKD71800F0ENUser manual 2
ITIstruzioni per l’uso 16
RUИнструкция по эксплуатации 31
ESManual de instrucciones 47
 

CONTENTS
1.SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
2.CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
3.DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
4.HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

1.  SAFETY INFORMATION
In the interest of your safety and to en-
sure the correct use, before installing
and first using the appliance, read this
user manual carefully, including its hints
and warnings. To avoid unnecessary mis-
takes and accidents, it is important to
ensure that all people using the appli-
ance are thoroughly familiar with its op-
eration and safety features. Save these
instructions and make sure that they re-
main with the appliance if it is moved or
sold, so that everyone using it...

2.Make sure that the power plug is
not squashed or damaged by the
back of the appliance. A squashed
or damaged power plug may
overheat and cause a fire.
3.Make sure that you can come to
the mains plug of the appliance.
4.Do not pull the mains cable.
5.If the power plug socket is loose,
do not insert the power plug.
There is a risk of electric shock or
fire.
6.You must not operate the appli-
ance without the lamp cover (if
foreseen) of interior lighting.
• This appliance is heavy. Care should
be taken...

ble regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, espe-
cially at the rear near the heat ex-changer. The materials used on
this appliance marked by the
symbol 
 are recyclable.
2. CONTROL PANEL
56432
1
1Display
2Temperature warmer button
3Temperature colder button
4OK button
5Mode button
6ON/OFF button
It is possible to change predefined
sound of buttons to a loudly one by
pressing together Mode button and
Temperature colder button for some
seconds. Change is...

The set temperature will be reached
within 24 hours.
After a power failure the set tem-
perature remains stored.
2.5 DYNAMICAIR function
To switch on the function:
1.Press the Mode button until the cor-
responding icon appears.
The DYNAMICAIR indicator flashes.
2.Press the OK button to confirm.
The DYNAMICAIR indicator is
shown.
To switch off the function:
1.Press the Mode button until the DY-
NAMICAIR indicator flashes.
2.Press the OK button to confirm.
3.The DYNAMICAIR indicator goes
off.
If the...

2.Press the OK button to confirm.
3.The COOLMATIC indicator goes off.
The function switches off by se-
lecting a different fridge set tem-
perature.
2.9 Holiday function
This function allows you to keep the re-
frigerator closed and empty during a
long holiday period without the forma-
tion of a bad smell.
The fridge compartment must be
empty with holiday function on.
To switch on the function:
1.Press the Mode button until the cor-
responding icon appears.
The Holiday indicator flashes.
The fridge...

3.3 DYNAMICAIR
The refrigerator compartment is equip-
ped with a device that allows for rapid
cooling of foods and more uniform tem-
perature in the compartment.
This device activates by itself when nee-
ded, for example for a quick tempera-
ture recovering after door opening or
when the ambient temperature is high.
Allows you to switch on the device man-
ually when needed (refer to "DYNAMI-
CAIR Function").
The DYNAMICAIR device stops when
the door is open and restarts immediate-
ly after the...

4. HELPFUL HINTS AND TIPS
4.1 Hints for energy saving
• Do not open the door frequently or
leave it open longer than absolutely
necessary.
• If the ambient temperature is high and
the Temperature Regulator is set to
low temperature and the appliance is
fully loaded, the compressor may run
continuously, causing frost or ice on
the evaporator. If this happens, set the
Temperature Regulator toward warm-
er settings to allow automatic defrost-
ing and so a saving in electricity con-
sumption.
4.2 Hints for...

damage the plastics used in this appli-
ance. For this reason it is recommended
that the outer casing of this appliance is
only cleaned with warm water with a little
washing-up liquid added.
After cleaning, reconnect the equipment
to the mains supply.
5.2 Periods of non-operation
When the appliance is not in use for
long periods, take the following precau-
tions:•disconnect the appliance from elec-
tricity supply
• remove all food
• defrost (if foreseen) and clean the ap-
pliance and all accessories
•...