AEG Scs 51800 S0 User Manual

							1 2
Install the appliance in the niche.
Push the appliance in the direction of
the arrow (1) until the upper gap cover
stops against the kitchen furniture.
Push the appliance in the direction of
the arrow (2) against the cupboard on
the opposite side of the hinge.
4 mm
44 mm
Adjust the appliance in the niche.
Make sure that the distance between
the appliance and the cupboard front-
edge is 44 mm.
The lower hinge cover (in the accesso-
ries bag) makes sure that the distance
between the appliance and the kitchen
furniture is correct.
Make sure that the clearance between
the appliance and the cupboard is 4
mm.
Open the door. Put the lower hinge
cover in position.
I
I
Attach the appliance to the niche with
4 screws.
ENGLISH31
 
						

							Remove the correct part from the
hinge cover (E). Make sure to remove
the part DX, in the case of right hinge,
SX in opposite case.
EE
B DC
Attach the covers (C, D) to the lugs and
the hinge holes.
Install the vent grille (B).
Attach the hinge covers (E) to the
hinge.
G
H
Connect the appliance laterally to the
kitchen furniture sidewall:
1.Loosen the screws of the part (G)
and move the part (G) till the furni-
ture sidewall.
2.Tighten the screws of the part (G)
again.
3.Attach the part (H) to the part (G).
32www.aeg.com
 
						

							Disconnect the parts (Ha), (Hb), (Hc)
and (Hd).
ca. 50 mm
ca. 50 mm21 mm 90°       
90°       
21 mmInstall the part (Ha) on the inner side of
the kitchen furniture door.
Ha
Hc
Push the part (Hc) on the part (Ha).
Ha
Hb
8 mm
Open the appliance door and the
kitchen furniture door at an angle of
90°.
Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and
the furniture door and mark the holes.
ENGLISH33
 
						

							Ha K
8 mm
Remove the brackets and mark a dis-
tance of 8 mm from the outer edge of
the door where the nail must be fitted
(K).
Hb
Place the small square on the guide
again and fix it with the screws sup-
plied.
Align the kitchen furniture door and
the appliance door by adjusting the
part (Hb).
Hb
Hd
Press the part (Hd) on the part (Hb).
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly
to the cabinet.
• The door opens and closes correctly.
8. NOISES
There are some sounds during normal
running (compressor, refrigerant circula-
tion).
34www.aeg.com
 
						

							BRRR!HISSS!
CLICK!
BLUBB!
CRACK!
SSSRR
R!
OK
CLICK!CLICK!SSSRRR!SSSRRR!
BRRR!BRRR!HISSS!HISSS!
BLUBB!BLUBB!CRACK!CRACK!
ENGLISH35
 
						

							9. TECHNICAL DATA
   
Dimension of the recess  
 Height1780 mm
 Width560 mm
 Depth550 mm
Rising Time 24 h
Voltage 230-240 V
Frequency 50 Hz
The technical information are situated in
the rating plate on the internal left side
of the appliance and in the energy label.
10. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol  . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronicappliances. Do not dispose
appliances marked with the symbol with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
36www.aeg.com
 
						

							ENGLISH37
 
						

							38www.aeg.com
 
						

							ENGLISH39
 
						

							www.aeg.com/shop
222358092-A-202012